NHTSA ID Number: 10251259
Manufacturer Communication Number: 24B10
TSB/Document Date: 2024-03-05
Summary
Certain 2025 Model Year F-650/750 Vehicles Equipped with 6.7L Diesel Engines - Passenger-Side Floor Pan Heat Patch Installation
Stacy L. Balzer
Director
Service Engineering Operations
Ford Customer Service Division
Ford Motor Company
PO Box 1904
Dearborn, Michigan 48121
February 28, 2024
TO:
All U.S. Ford and Lincoln
Dealers
SUBJECT:
NEW VEHICLE RECOMMENDED DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 24B10
Certain 2025 Model Year F-650/750 Vehicles Equipped with 6.7L Diesel Engines
Passenger-Side Floor Pan Heat Patch Installation
PROGRAM TERMS
This program will be in effect through February 28, 2025. There is no mileage limit for this program.
AFFECTED VEHICLES
Vehicle
Model Year
Assembly Plant
Build Dates
F-650/750
2025
Ohio
December 4, 2023 through January 30, 2024
US population of affected vehicles: 75. Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS PROGRAM
In all of the affected vehicles, two floor-pan heat patches were not installed underneath the carpet on
the front passenger-side of the vehicle during the manufacturing process. Customers may notice that
the temperature of certain areas of the cabin interior floor might increase under high load and high
ambient temperature driving conditions.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this program, dealers are to
install two heat patches on the passenger side of the cabin floor pan. This service must be performed
on all affected vehicles at no charge to the vehicle owner. For new vehicle storage guidelines, refer to
EFC13033, Storage Guidelines for New Vehicles.
To assist vehicle owners to have this repair completed when parts are available, dealers should:
• Arrange for a mobile repair at the owner’s location, or:
o Re-deliver the owner’s vehicle after repairs have been completed.
• Pick-Up & Delivery and mobile service should be made available for all customers. Refer to
the Rental and Claiming sections for further details.
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters are expected to be mailed the week of March 18, 2024. Dealers should repair any
affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
ATTACHMENTS
• Administrative Information
• Labor Allowances and Parts Ordering Information
• Technical Instructions
• Mobile Service Repair Assessment
• Mobile Repair/Vehicle Pick-Up & Delivery Record
• Owner Notification Letters
© Copyright 2024 Ford Motor Company
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,
Stacy L. Balzer
© Copyright 2024 Ford Motor Company
Administrative Information
Page 1 of 3
Customer Satisfaction Program 24B10
MOBILE SERVICE REPAIR ASSESSMENT LEVEL
• All repairs in this program have the following assessment level:
- Light Mobile Service
MOBILE REPAIR RECOMMENDATIONS
• Confirm with the customer a mobile repair is feasible.
• Check OASIS before going to the customer’s home or business to confirm if any other
outstanding FSA needs to be completed.
• Transportation – due to the simplicity of this repair, a specialty vehicle is not required.
MOBILE REPAIR ADDITIONAL INFORMATION
Please ensure the technician brings the following to the mobile repair destination:
• Printed Technical Instructions
• Printed Repair/Work Order or any other necessary documentation as customer copy(s)
o Documents could also be emailed to the customer.
• Shirt/uniform and vehicle graphic with the dealership or Ford
logos are recommended.
• Recommended specialty tools: Interior Trim Removal Tool
MOBILE REPAIR QUESTIONS AND ASSISTANCE
• For questions and assistance, contact the Special Service Support Center (SSSC) via the
SSSC Web Contact Site. Work with Dealership warranty administrator to create a SSSC
contact ID#.
• Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline:
(800) 325-5621.
OASIS ACTIVATION
OASIS will be activated on February 28, 2024.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on February 28,
2024. Owner names and addresses will be available by April 5, 2024.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
SOLD VEHICLES
•
•
Owners of affected vehicles will be directed to dealers for repairs.
Immediately contact any of your affected customers whose vehicles are not on your VIN list
but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when
available) and schedule a service date.
•
•
Correct other affected vehicles identified in OASIS which are brought to your dealership.
Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.
© Copyright 2024 Ford Motor Company
Administrative Information
Page 2 of 3
Customer Satisfaction Program 24B10
STOCK VEHICLES
•
•
Correct all affected units in your new vehicle inventory before delivery.
Use OASIS to identify any affected vehicles in your used vehicle inventory.
BRANDED / SALVAGED TITLE VEHICLES
Affected branded / salvaged title vehicles are eligible for this service action.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
MOBILE REPAIR CLAIMING QUESTIONS
Dealers participating in the Remote Experience Program:
• Ford Dealers - refer to EFC14125, 2024 Remote Experience Program.
• Lincoln
Retailers - refer to EFC14164, 2024 Remote Experience Program.
Dealers NOT participating in the 2024 Remote Experience Program:
• For questions and assistance, contact the Special Service Support Center (SSSC) via the
SSSC Web Contact Site. Work with the Dealership warranty administrator to create an SSSC
contact ID#.
• Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline:
(800) 325-5621.
PICK-UP & DELIVERY- Participating Dealers
Dealers participating in the Remote Experience Program:
• Ford Dealers - Refer to EFC14125, 2024 Remote Experience Program, Pick-Up & Delivery
Offset section for additional details.
PICK-UP & DELIVERY- Non-participating Dealers
Ford Dealers not participating in the 2024 Remote Experience Program for Pick-Up & Delivery are
authorized to claim unique services for completing this program.
• Dealers are authorized to claim one-half labor hour per repair for vehicle Pick-Up & Delivery
services. Refer to Labor Allowances for details.
• Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order documentation.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford
& Lincoln
Program Policies / General Information & Special Circumstances
for FSAs / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the “Related
Damage” radio button checked.
o F-650/F-750 trucks – 2 years, regardless of miles driven
• For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval
Request to the SSSC Web Contact Site before completing the repair.
© Copyright 2024 Ford Motor Company
Administrative Information
Page 3 of 3
Customer Satisfaction Program 24B10
CLAIMS PREPARATION AND SUBMISSION
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
▪ Claim type 31: Field Service Action
▪ Sub Code: 24B10
▪ Customer Concern Code (CCC): T12 – Tears, snags, cracks on floor mats and
carpets
▪ Condition Code (CC): 39 – Missing part
▪ Causal Part Number: 1511173, Quantity 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with the same claim type and subcode as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
• Pick-Up & Delivery:
o Dealers participating in the Remote Experience Program –
▪ Refer to EFC14125, 2024 Remote Experience Program, Pick-Up & Delivery
(PDL) Offset section for additional details.
o Dealers NOT participating in the Remote Experience Program –
▪ Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery
services.
▪ Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order
documentation.
• Mobile Repair:
o Dealers participating in the Remote Experience Program –
▪ Ford Dealers - refer to EFC14125, 2024 Remote Experience Program.
▪ Lincoln
Retailers - refer to EFC14164, 2024 Remote Experience Program.
o Dealers NOT participating in the Remote Experience Program –
▪ Mobile repair allowances can be claimed for dealer-performed mobile repairs.
Dealers that are working with Ford
-contracted mobile repair companies should
refer to those companies for claiming instructions.
▪ For dealer-performed mobile repairs, retain a copy of the Service Management
signed record (see Repair Procedure Improvement & Revised Labor Time),
with the repair order documentation.
o Claim the mobile repair allowance Labor Operation Code 24B10MM along with the
applicable Labor Operation Code for the repair (refer to the Labor Allowances table in
Labor Allowances and Parts Ordering Information).
© Copyright 2024 Ford Motor Company
Labor Allowances and Parts Ordering Information
Page 1 of 2
Customer Satisfaction Program 24B10
LABOR ALLOWANCES
Description
Labor Operation
Labor Time
Install two heat patches on passenger side of cabin floor pan
24B10B
0.3 Hours
Mobile Service:
This allowance is only for non-eligible 2024 Remote
Experience Program Dealers.
Can be used when the repair takes place away from the
dealership
If Additional Time is Required Due to Travel, Please Submit
an SSSC Approval Form
24B10MM
0.5 Hours
Vehicle Pick-Up & Delivery Allowance:
This allowance is only for non-eligible 2024 Remote
Experience Program Dealers.
NOTE: This allowance is for dealer-performed vehicle PickUp & Delivery for dealership repairs only. Can only be
claimed once, regardless of outstanding FSAs repaired.
24B10PP
0.5 Hours
PARTS REQUIREMENTS / ORDERING INFORMATION
Part Number
Description
Order
Quantity
Claim
Quantity
4C2Z- 1511173-A Heat Patch (2 required, 1 per package)
2
2
Order your parts requirements through normal order processing channels. To guarantee the shortest
delivery time, an emergency order for parts must be placed.
© Copyright 2024 Ford Motor Company
Labor Allowances and Parts Ordering Information
Page 2 of 2
DEALER PRICE
For the latest prices, refer to DOES II.
PARTS RETENTION, RETURN, & SCRAPPING
Follow the provisions of the Warranty and Policy Manual, Section 1 - WARRANTY PARTS
RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must
be scrapped by all applicable local, state, and federal environmental protection and hazardous
material regulations. Federal law prohibits selling motor vehicle parts or components that are under
safety, compliance, or emissions recall.
EXCESS STOCK RETURN
The excess stock returned for credit must have been purchased from Ford Customer Service Division
by Policy Procedure Bulletin 4000.
REPLACED FSA PARTS INSPECTION AND SIGN OFF
Effective March 1st, 2021, all parts replaced as part of an FSA repair with a repair order open date of
March 1st, 2021, or later must be inspected and signed off on the repair order by a member of your
dealer’s fixed operations management team or an employee the task has been delegated to. If the
task is to be delegated to a non-management employee, the employee needs to be someone other
than the technician who completed the repair and needs to understand the importance of completing
this task consistently and accurately.
•
All parts replaced as part of an FSA repair should be returned to the parts department
following the Warranty Parts Retention and Return Policies.
•
Inspect the replaced parts to verify the FSA repair was completed.
•
If the FSA repair is found to be complete, the designated employee signs the repair order line
or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts
were inspected and validated to have been replaced.
•
After the parts have been inspected, they should be handled based on the guidance in the
parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.). Please
visit FMCDEALER > PARTS & SERVICE > WARRANTY ADMINISTRATION & WARRANTY
PARTS RETURN for the latest Immediate Scrap List information.
•
This process is subject to review during warranty audits for FSA repairs with a repair order
open date of March 1st, 2021, or later. Any eligible FSA claims requiring parts replacement
found not to have been inspected and signed off during a warranty audit will be subject to
chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair
Process.
Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer-owned vehicle
repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post-repair FSA
parts inspection process (electronic or handwritten) is independent of other warranty approval
requirements. The approval by the designated employee implies that the FSA parts were found to be
replaced and must be able to be identified on the Repair Order. If multiple FSAs require approval on a
single Repair Order, each applicable occurrence will require individual post-repair approval by the
designated employee.
© Copyright 2024 Ford Motor Company
Ford Motor Company
Ford Customer Service Division
PO Box 1904
Dearborn, Michigan 48121
March 2024
Customer Satisfaction Program 24B10
Mr. John Sample
123 Main Street
Anywhere, USA 12345
Your Vehicle Identification Number (VIN): 12345678901234567
At Ford
Motor Company, we are committed not only to building high-quality, dependable products but
also to building a community of happy, satisfied customers. To demonstrate that commitment, we are
providing a no-charge Customer Satisfaction Program for your vehicle with the VIN shown above.
Why are you receiving
this notice?
On your vehicle, it may be possible two floor-pan heat patches were not
installed underneath the carpet on the front passenger-side of the vehicle
during the manufacturing process.
What is the effect?
The temperature of certain areas of the front passenger-side cabin interior
floor might increase under high load and high ambient temperature driving
conditions.
What will Ford and
your dealer do?
In the interest of customer satisfaction, Ford
Motor Company has authorized
your dealer to install two heat patches underneath the carpet on the
passenger side of the cabin floor pan free of charge (parts and labor) under
the terms of this program.
This Customer Satisfaction Program will be in effect until February 28, 2025
regardless of mileage. Coverage is automatically transferred to subsequent
owners.
How long will it take?
The time needed for this repair is less than one-half day. However, due to
service scheduling requirements, your dealer may need your vehicle for a
longer period of time.
© Copyright 2024 Ford Motor Company
What should you do?
Please call your dealer without delay to schedule a service appointment for
Customer Satisfaction Program 24B10. Provide the dealer with your VIN,
which is printed near your name at the beginning of this letter.
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 24B10
Replacement Service Bulletin Number:
MFR Communication Date: 2024-02-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda
, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




