NHTSA ID Number: 10251232
Manufacturer Communication Number: 23B21 S1
TSB/Document Date: 2024-03-05
Summary
Certain 2023 Model Year F-150 and Bronco Vehicles - Gateway Module Programing
Dan Wilyard
Chief Engineer Recall and CIDR
Service Engineering Operations
Ford Customer Service Division
Ford Motor Company
P. O. Box 1904
Dearborn, Michigan 48121
February 19, 2024
TO:
All U.S. Ford and Lincoln
Dealers
SUBJECT:
Customer Satisfaction Program 23B21 – Supplement # 1
Certain 2023 Model Year F-150 and Bronco Vehicles
Gateway Module Programing
REF:
Customer Satisfaction Program 23B21
Certain 2023 Model Year F-150 Lightning
Dated March 29, 2023
New! REASON FOR THIS SUPPLEMENT
• Program Terms: Section updated.
• Expiration Date: Section updated.
• Affected Vehicles: Section updated.
• Owner Notification Mailing Schedule: New updated Owner Letters.
• Customer Handout: Attachment updated.
• Technical Information: Updated Technical Information.
• Mobile Service Repair Assessment Level: Section added.
• Mobile Service Repair Assessment: Attachment added.
• Mobile Repair/Vehicle Pickup and Delivery Record: Attachment added.
• OASIS Activation: Section updated.
• FSA VIN List Activation: Section updated.
• Labor Allowances: Section updated.
New! PROGRAM TERMS
Program terms coverage:
• For the Initial vehicle population of F-150 Lightning launched on March 29, 2023. This
coverage will be in effect through March 31, 2024. There is no mileage limit for this program.
• For Incremental vehicle population of F-150 and Bronco vehicles, this coverage will last
through February 28, 2025. There is no mileage limit for this program.
• Coverage is automatically transferred to subsequent owners.
Vehicle Population
Vehicle Line
Expiration Date
Initial
F-150 Lightning
March 31, 2024
Incremental
F-150
February 28, 2025
Incremental
Bronco
February 28, 2025
© Copyright 2024 Ford Motor Company
New! EXPIRATION DATE
For F-150 Lightning customers, this Customer Satisfaction Program has an expiration date of March
31, 2024 to encourage dealers and customers to have this service performed as soon as possible.
For incremental F-150 and BRONCO customers, this Customer Satisfaction Program has an
expiration date of February 28, 2025 to encourage dealers and customers to have this service
performed as soon as possible.
We recommend dealers utilize their FSA VIN Lists names and address to contact customers with
affected vehicles. This will help minimize the number of vehicles that may experience connectivity
features that do not work, including Over The Air (OTA) updates, connected vehicle data and
FordPass app connectivity.
FSA VIN Lists for F-150 Lighting were available on March 29, 2023.
FSA VIN List for Incremental F-150 and Bronco will be available February 19, 2024.
New! AFFECTED VEHICLES
Vehicle
Model Year
Assembly Plant
Build Dates
F-150 Lightning
2023
Rouge Electrical
June 10, 2022 through December 23, 2022
F-150
2023
Dearborn
April 29, 2022 through March 7, 2023
F-150
2023
Kansas City Plant
June 11, 2022 through March 1, 2023
Bronco
2023
Michigan
June 8, 2022 through March 17, 2023
U.S. population of affected vehicles: 201,252. Affected vehicles are identified in OASIS and FSA VIN
Lists.
Note: Some vehicles may be in the process of being repaired at the plant. Monitor OASIS before
opening an RO and/or beginning a repair.
REASON FOR THIS PROGRAM
In all of the affected vehicles, the Gateway Module (GWM) may lose internet connection. This may
cause the vehicle to experience an inoperative FordPass application (inability to review the vehicle's
state of charge, inoperative remote start and/or inoperative remote lock and unlock). This may be
combined with diagnostic trouble codes (DTC) U0146:09 stored in the Telematics Control Unit (TCU)
and U2402:00 and/or U2402:92 stored in the GWM.
SERVICE ACTION
Dealers are to correct the condition by updating the GWM to the latest software level via a
coordinated module reprogramming. This service must be performed on all affected vehicles at no
charge to the vehicle owner.
OVER-THE-AIR (OTA) UPDATES (FORD SOFTWARE UPDATE):
• In addition to you being able to update vehicles now using FDRS, Ford deployed an OTA
software update on March 20, 2023.
• Before scheduling service for an OTA capable vehicle, please verify through PTS that the
Field Service Action (FSA) is still open (OASIS) and the vehicle has not already received the
OTA update.
1. Verify FSA is still open by viewing the “Outstanding Field Service Actions” on the
OASIS results page on PTS. (Note: If the OTA update was recently downloaded onto
vehicle the FSA may still show as open)
© Copyright 2024 Ford Motor Company
OVER-THE-AIR (OTA) UPDATES (FORD SOFTWARE UPDATE) (Continued):
2. If the FSA is still open in the Outstanding Field Service Actions section, proceed to the
tab titled “Connected Vehicle”. In the “Over the Air Update 60-Day History”, you can
determine if an OTA update occurred on the affected module by viewing the
“Completion Status”, which should show “Campaign Successful”. The “Release Notes”
will also indicate that the campaign was successfully downloaded onto the vehicle.
(Note: the FSA may still show as open in the Outstanding Field Service Actions section
of PTS even though the OTA update was successfully downloaded onto the vehicle.
This FSA will eventually be removed from the Outstanding Field Service Actions
screen of PTS.)
New! OWNER NOTIFICATION MAILING SCHEDULE
Owner Letters for the initial F-150 Lighting population were mailed April 21, 2023.
Owner Letters for the incremental F-150 and Bronco populations are expected to be mailed the week
of March 18, 2024.
Owners will be given the option of installing the software update themselves, or they can have their
dealer perform the service for them.
New! ATTACHMENTS
• Administrative Information
• Labor Allowances and Parts Ordering Information
• Technical Information
• Customer Handout – Ford Software Updates
• Mobile Service Repair Assessment
• Mobile Repair/Vehicle Pickup and Delivery Record
• Owner Notification Letter
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,
Dan Wilyard
Chief Engineer Recall and CIDR
© Copyright 2024 Ford Motor Company
Administrative Information
Page 1 of 2
Customer Satisfaction Program 23B21 – Supplement # 1
Certain 2023 Model Year F-150 and Bronco Vehicles
Gateway Module Reprogramming
New! MOBILE SERVICE REPAIR ASSESSMENT LEVEL
All repairs in this program have the following assessment level.
- Not Mobile Service Capable
New! OASIS ACTIVATION
OASIS was activated on March 29, 2023 for the initial population. For the new incremental population,
OASIS will be activated on February 19, 2024.
New! FSA VIN LISTS ACTIVATION
FSA VIN Lists for initial F-150 Lighting population were available through
https://web.fsavinlists.dealerconnection.com on March 29, 2023. Owner names and addresses were
available on May 5, 2023.
FSA VIN Lists for the incremental F-150 and Bronco populations will be available through
https://web.fsavinlists.dealerconnection.com on February 19, 2024. Owner names and addresses will
be available week of April 1, 2024.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
SOLD VEHICLES
• Owners of affected vehicles will be directed to dealers for repairs.
• Immediately contact any of your affected customers whose vehicles are not on your VIN list
but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when
available) and schedule a service date.
• Correct other affected vehicles identified in OASIS which are brought to your dealership.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.
STOCK VEHICLES
• Correct all affected units in your new vehicle inventory before delivery.
• Use OASIS to identify any affected vehicles in your used vehicle inventory.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this service action.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
© Copyright 2024 Ford Motor Company
Administrative Information
Page 2 of 2
Customer Satisfaction Program 23B21 – Supplement # 1
Certain 2023 Model Year F-150 and Bronco Vehicles
Gateway Module Reprogramming
PICK-UP AND DELIVERY
All customers affected by this program have the option of complimentary Vehicle Pick-up & Delivery
service (at participating dealers) in lieu of a rental vehicle. Refer to EFC14125, 2024 Remote
Experience Program, Pickup & Delivery (PDL) Offset section for details.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances
for FSAs / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the “Related
Damage” radio button checked.
o Ford vehicles – 3 years or 36,000 miles
• For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval
Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
•
•
•
Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
▪ Claim type 31: Field Service Action
▪ Sub Code: 23B21
▪ Customer Concern Code (CCC): A93
▪ Condition Code (CC): 04
▪ Causal Part Number: 14G490. Quantity 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with same claim type and sub code as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
Pickup & Delivery: Refer to EFC14125, 2024 Remote Experience Program, Pickup &
Delivery (PDL) Offset section for additional details.
© Copyright 2024 Ford Motor Company
Labor Allowances and Parts Ordering Information
Page 1 of 1
Customer Satisfaction Program 23B21 – Supplement # 1
Certain 2023 Model Year F-150 and Bronco Vehicles
Gateway Module Reprogramming
New! LABOR ALLOWANCES
Description
Labor Operation
Labor Time
F-150 Reprogram the Gateway Module (GWM) to the latest
level.
23B21B
0.4 Hour(s)
Bronco Reprogram the Gateway Module (GWM) to the latest
level.
23B21C
0.4 Hour(s)
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this repair.
© Copyright 2024 Ford Motor Company
Ford Motor Company
Ford Customer Service Division
P. O. Box 1904
Dearborn, Michigan 48121
March 2024
Customer Satisfaction Program 23B21
Mr. John Sample
123 Main Street
Anywhere, USA 12345
Your Vehicle Identification Number (VIN): 12345678901234567
At Ford Motor Company, we are committed not only to building high-quality, dependable products but
also to building a community of happy, satisfied customers. To demonstrate that commitment, we are
providing a no-charge Customer Satisfaction Program for your vehicle with the VIN shown above.
Why are you receiving
this notice?
On your vehicle, it may be possible for the vehicle’s computers and its
connectivity Gateway Module to not be able to connect to the internet.
What is the effect?
This may result in inoperative smart phone applications with FordPass
features not functioning properly (inability to review the vehicle’s state of
charge, inoperative remote start and/or inoperative remote lock and unlock).
What will Ford and
your dealer do?
In the interest of customer satisfaction, Ford Motor Company has released
new software for the Gateway Module. Your vehicle is capable of Ford
Software Updates.
When Automatic Software Updates are turned ON or the Gateway Module
has been reset, the software will be downloaded to your vehicle over a
private wi-fi network or through your vehicle’s modem through the cellular
network. The software installation will happen after the download.
Note: Refer to ford.com/support for further information on your Ford
Software Update system.
Should the software fail to load or install properly, Ford has authorized your
dealer to install 4.2.1.2 Over-The-Air (OTA) software update, free of charge
(parts and labor) under the terms of this program.
This Customer Satisfaction Program will be in effect until February 28, 2025,
regardless of mileage. Coverage is automatically transferred to subsequent
owners.
How long will it take?
The time needed for this software installation is approximately one hour. If
you prefer to go to your dealer for the software update, the time needed for
this repair is less than one-half day. However, due to service scheduling
requirements, your dealer may need your vehicle for a longer period of time.
© Copyright 2024 Ford Motor Company
What should you do?
For your convenience, Ford is encouraging you to update your vehicle’s
software using Ford software update capabilities. By choosing or utilizing
one of the two following options:
1. Option One - For your convenience and if you prefer, go to your Ford
dealer to receive your vehicle’s Ford Software update.
AND/OR
2. Option Two - You can also update your vehicle’s software at home
by following the steps below:
To get the Ford Software Update capabilities, you can remove and install
your vehicle’s Body Control Module (BCM) Gateway Module power Fuse. By
utilizing or following this option, you should not need to take your vehicle to
your dealer unless you’re unable to successfully perform the update. Here is
what you can do:
Note: For vehicles already exhibiting inoperative Ford Pass and connectivity
features, the Gateway Module will need a reset, to allow the Ford Over-TheAir (OTA) software update to download to the vehicle. Following this specific
procedure to this action below, will temporarily enable the software update to
download.
Recommendation: Set-up your vehicle. Park in a well-lit area. Make sure
that your BRONCO vehicle is turned off, and that your vehicle is fully
charged prior to proceeding to the following procedure. Follow this easy
procedure:
Beginning of Procedure:
Procedure - Step 1: Access your vehicles BCM Fuse Box (Open the Drivers
door, access the interior cover below steering wheel)
Procedure – Step 2: Lower down the complete interior trim cover of the
BCM Fuse Box cover by pulling the cover. The BCM Fuse Box interion cover
will swing down, towards the vehicles floor.
© Copyright 2024 Ford Motor Company
What should you do?
(Continued)
Procedure – Step 3: The BCM Fuse Box is located on the left side of the
steering column.
Note: If your vehicle is equipped with the exterior Door Keypad feature, a
white plastic card may be present and covering the BCM Fuse Box fuses. To
gain access to the Fuses, remove the Key Code plastic card for this
procedure.
On the Fuse Box panel, look for Fuse location 12.
(Use the Fuse Panel, Fuse location figure below).
Remove the - 7.5 Amp - fuse number 12 for about 60 seconds (1 minute)
and then re-install fuse Number 12 back on its original Fuse location.
Continue on next page.
© Copyright 2024 Ford Motor Company
What should you do?
(Continued)
Procedure – Step 4:
Note: If equipped with the door Keypad feature, re-install the Key Code
plastic card on front of the fuses (fuse panel), as it originally came with.
Slowly raise and reinstall the BCM Fuse Box interior trim cover. Apply even
pressure, to ensure all the interior clips click and hold the interior trim cover
back to its original position.
End of Procedure.
Note: To complete this software update you will need to confirm Automatic
software updates are turned on (See included instructions sheet). You can
look for icons on the in-vehicle screen, as well as see the progress of the
update on your FordPass app or Owner website. The next time you are
driving your vehicle the Automatic Software Update will be performed into
your vehicle.
If you choose to have your dealer install this software, please call your
dealer to schedule a service appointment for Customer Satisfaction Program
23B21. Provide the dealer with your VIN, which is printed near your name at
the beginning of this letter.
If you do not already have a servicing dealer, you can access
ford.com/support for dealer addresses, maps, and driving instructions.
Ford Motor Company wants you to have this service action completed on
your vehicle. The vehicle owner is responsible for making arrangements to
have the work completed.
NOTE: You can receive information about Recalls and Customer
Satisfaction Programs through our FordPass App. The app can be
downloaded through the App Store or Google Play. In addition, there are
other features such as reserving parking in certain locations and controlling
certain functions on your vehicle (lock or unlock doors, remote start) if it is
equipped to allow control.
What if you no longer
own this vehicle?
If you no longer own this vehicle and have an address for the current owner,
please forward this letter to the new owner.
You received this notice because our records, which are based primarily on
state registration and title data, indicate that you are the current owner.
© Copyright 2024 Ford Motor Company
Can we assist you
further?
If you have difficulties getting your vehicle repaired promptly and without
charge, please contact your dealership's Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our
Ford Customer Relationship Center at 1-866-436-7332 and one of our
representatives will be happy to assist you. If you wish to contact us through
the Internet, our address is: ford.com/support.
For the hearing impaired call 1-800-232-5952 (TDD). Representatives are
available Monday through Friday: 8:00 AM – 8:00 PM (Eastern Time).
FLEET OWNERS: If you have questions or concerns, please contact our
Ford Pro Contact Center at 1-800-34-FLEET, choose Option #1, and one
of our representatives will be happy to assist you. If you wish to contact us
through the Internet, our address is fleet.ford.com.
Representatives are available Monday through Friday: 7:00 AM – 11:00 PM
and Saturday 7:00 AM – 5:00 PM (Eastern Time).
Thank you for your attention to this important matter.
Ford Customer Service Division
© Copyright 2024 Ford Motor Company
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 23B21 S1
Replacement Service Bulletin Number:
MFR Communication Date: 2024-02-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.