NHTSA ID Number: 10248772
Manufacturer Communication Number: 14329
TSB/Document Date: 2024-01-16
Summary
Special Coverage Adjustment ? Loss of Power Steering Assist
Bulletin No.: 14329
Date: September 2014
Service Bulletin
SPECIAL COVERAGE
SUBJECT:
Special Coverage Adjustment – Loss of Power Steering Assist
MODELS:
2008-2011 Buick
Enclave
2009-2011 Chevrolet Traverse
2007-2011 GMC Acadia
2007-2010 Saturn OUTLOOK
CONDITION
Some 2008-2011 model year (MY) Buick Enclave, 2009-2011 MY Chevrolet Traverse, 2007-2011
MY GMC Acadia, and 2007-2010 MY Saturn OUTLOOK vehicles may develop a power steering
pump wear condition that can cause an intermittent drop of power steering hydraulic pressure that
will cause reduced or loss of steering assist. The vehicle may revert to manual steering which
requires greater driver effort, particularly at low vehicle speeds.
SPECIAL COVERAGE ADJUSTMENT
This special coverage covers the condition described above for a period of 10 years or 150,000
miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service,
regardless of ownership.
Dealers are to flush the power steering system, replace the power steering pump, and if it hasn't
already been replaced, install a new steering gear valve housing. The repairs will be made at no
charge to the customer.
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after
September 5, 2014, are covered by this special coverage and must be submitted using the labor
operation codes provided with this bulletin. Claims with repair orders prior to September 5, 2014,
must be submitted to the Service Contract provider.
VEHICLES INVOLVED
All involved vehicles are identified by Vehicle Identification Number on the Applicable Warranties
section in GM Global Warranty Management system. Dealership service personnel should
always check this site to confirm vehicle involvement prior to beginning any required inspections
and/or repairs. It is important to routinely use this tool to verify eligibility because not all similar
vehicles may be involved regardless of description or option content.
Copyright 2014 General Motors. All Rights Reserved.
Page 2
September 2014
Bulletin No.: 14329
PART INFORMATION
Parts required to complete this special coverage are to be obtained from General Motors Customer
Care and Aftersales (GMCC&A).
Part Number
Description
Quantity/Vehicle
Parts for Power Steering Pump Only Replacement
20954812
Pump, Power Steering
1
88861037
DEXRON-VI Fluid (w/o steering gear kit)
3
Additional Parts Req'd if Steering Gear Housing Requires Replacing
88861037
DEXRON-VI Fluid (with steering gear kit)
5
22847734
Kit, Steering Gear Hsg (w/RPO NV7)
1
22847735
Kit, Steering Gear Hsg. (w/o RPO NV7)
1
11609933
Bolt, Front Frame Front Mounting
2
11609932
Bolt, Front Frame Rear Mounting
2
SERVICE PROCEDURE
1.
Verify that the power steering pump requires replacement. Refer to the appropriate diagnostic
information in SI.
If the power steering pump does NOT require replacement, no further action is required.
Inform the customer that any additional diagnosis and repairs are not covered under this
special coverage.
If the power steering pump requires replacement, proceed to the next step.
Note: Check the vehicle history before beginning repairs. Ensure that the vehicle has been
updated to DEXRON®-VI fluid. This is fluid replacement usually takes place when performing PI
0620 and/or PI0029. The DEXRON®-VI fluid is red in color, the original fluid is light brown in color.
If the fluid has not been updated, see the Installing New Steering Gear Housing Kit and Fluid
section below.
2.
Replace the power steering pump and fluid. Refer to Power Steering Pump Replacement in
SI.
Caution: Due to the interface between the pinion shaft seal and the fluid, it is critical to ensure
that no old fluid comes in contact with the new seal (the new seal is included with the Steering
Gear Housing Kit). Be sure to thoroughly flush all old fluid from the system prior to installing the
new housing.
Page 3
September 2014
Bulletin No.: 14329
Installing New Steering Gear Housing Kit and Fluid
If the fluid has not been updated to DEXRON®-VI fluid, the following steps must be performed in
addition the pump replacement procedure. The new steering gear housing kit will include either a
tag or an owner’s manual insert that identifies the vehicle has been converted to DEXRON®-VI. If
the kit includes the tag, it should be installed on the power steering reservoir filler neck and
secured with the cap. If the kit includes the insert, it should be placed in the vehicle owner’s
manual in the appropriate section. Also, please advise the customer that their vehicle has been
converted to DEXRON®-VI.
1.
Flush the power steering system with DEXRON®-VI Automatic Transmission Fluid.
2.
Raise and support the vehicle until the wheels are approximately 61 cm (24 in) off the ground.
3.
Place a large container under the vehicle in order to collect the draining fluid.
1856010
4.
Loosen the hose clamp (1) and disconnect the power steering fluid reservoir inlet hose from
the power steering fluid reservoir.
5.
Plug the power steering fluid reservoir inlet port.
Note: This step may require 3L (3 qt) of DEXRON®-VI fluid until the draining fluid appears red.
6.
With the key ON and the engine OFF, turn the steering wheel fully to the left and to the right
while an assistant maintains the minimum fluid level in the reservoir using DEXRON®-VI
Automatic Transmission Fluid. Continue until the fluid from the power steering fluid reservoir
inlet hose runs red.
7.
Remove the plug from the power steering fluid reservoir inlet port.
8.
Connect the power steering fluid reservoir inlet hose to the reservoir and secure the hose with
the clamp.
9.
Raise and support the vehicle.
10. Remove the intermediate steering shaft bolt and separate the intermediate steering shaft from
the steering gear.
11. Position adjustable jack stands underneath the left and right sides of the vehicle at the rear of
the front frame.
Page 4
September 2014
Bulletin No.: 14329
1856440
12. Remove the left and right front frame reinforcement mounting bolts. The left side is shown.
The right side is similar.
1856458
13. Loosen the front frame reinforcement mounting bolts (1). The left side is shown. The right side
is similar.
14. Loosen the front frame mounting bolts (2). The left side is shown. The right side is similar.
Page 5
September 2014
Bulletin No.: 14329
1856464
15. Loosen the front frame rear mounting bolts (1).
16. Lower the frame from the frame rail until enough clearance is gained to remove the steering
gear housing.
17. Remove the steering gear heat shield.
Caution: A rapid jerking condition of the steering wheel may occur if the steering gear transfer
tubes are incorrectly installed.
18. Remove both steering gear transfer tubes. Mark the location of the transfer tubes so they can
be reinstalled in the same position.
1861303
19. Remove the power steering gear inlet hose retaining plate bolt (1).
20. Disconnect the power steering gear inlet and outlet hoses from the steering gear.
21. Remove the power steering gear inlet and outlet pipe clip bolt (2).
Page 6
September 2014
Bulletin No.: 14329
22. Separate the power steering gear inlet and outlet hoses from the power steering gear inlet
and outlet pipe clip.
23. Disconnect the electrical connector from the steering gear valve solenoid, if equipped with
Variable Effort Steering (RPO NV7).
24. Clean the area around the steering gear housing to prevent any debris from entering the gear
once the housing is removed.
2691990
25. Remove the steering gear housing bolts and housing (1) from the steering gear.
26. Transfer the steering gear valve solenoid to the new housing, if equipped with Variable Effort
Steering (RPO NV7).
27. Remove the steering gear solenoid valve bolts and valve.
28. Remove and discard the three O-ring seals.
29. Install the new O-ring seals provided in the kit.
30. Install the steering gear valve and secure with bolts.
Tighten
Tighten the steering gear solenoid valve bolts to 8 N.m (71 lb in).
2691992
Page 7
September 2014
Bulletin No.: 14329
31. Install the blue seal protector (1) provided in kit onto the steering gear pinion shaft to prevent
damage to the seal when installing the housing.
32. Install the new steering gear housing and bolts to the steering gear. Remove the seal
protector.
Tighten
Tighten the housing bolts to 21 N.m (16 lb ft).
33. Connect the electrical connector to the steering gear valve solenoid, if equipped with Variable
Effort Steering (RPO NV7).
34. Install the power steering gear inlet and outlet hoses to the steering gear.
1861303
35. Install the power steering gear inlet hose retaining plate bolt (1).
Tighten
Tighten the bolts to 21 N.m (16 lb ft).
36. Install the power steering gear inlet and outlet hoses to the power steering gear inlet and
outlet pipe clip.
37. Install the power steering gear inlet and outlet pipe clip bolt (2).
Note: Be sure to install the transfer lines in the correct location. The longer transfer line should be
assembled to the upper hole on the steering gear and the shorter line assembled to the lower
hole.
38. Install both transfer tubes to the steering gear. Use new O-ring seals provided in kit.
Tighten
Tighten the tube nuts to 15 N.m (133 lb in).
39. Install the steering gear heat shield.
40. Raise the front frame to the vehicle body leaving a gap of approximately 12 mm (0.5 in).
Page 8
September 2014
Bulletin No.: 14329
1856440
41. Install the left and right front frame reinforcement mounting bolts. The left side is shown. The
right side is similar.
Tighten
Tighten the bolts to 50 N.m (37 lb ft).
1856464
42. Install the NEW front frame rear mounting bolts (1).
Tighten
Tighten the bolts to 100 N.m (74 lb ft). Tighten the bolts an additional 90 degrees.
Page 9
September 2014
Bulletin No.: 14329
1856458
43. Install the NEW front frame mounting bolts (2). The left side is shown. The right side is similar.
Tighten
a. Tighten the bolts to 100 N.m (74 lb ft).
b. Tighten the bolts an additional 90 degrees.
44. Remove the adjustable jack stands from underneath the vehicle.
45. Install the intermediate steering shaft to the steering gear and install the intermediate steering
shaft bolt.
46. Fill and bleed the power steering system. Refill with DEXRON®-VI Automatic Transmission
Fluid, Refer to the Power Steering System Bleeding procedure in SI.
47. Ensure there are no power steering fluid leaks.
48. Lower the vehicle.
CUSTOMER REIMBURSEMENT - For US
Customer requests for reimbursement of previously paid repairs to correct the condition described
in this bulletin are to be submitted to the dealer by September 30, 2015, unless otherwise specified
by state law. If this is not convenient for the customer, they may mail the completed Customer
Reimbursement Request Form and all required documents to the GM Customer Assistance Center.
Repairs must have occurred within the 10 years of the date the vehicle was originally placed in
service, or 150,000 miles, whichever occurs first.
All reasonable and customary costs to correct the condition described in this bulletin should
be considered for reimbursement. Any questions or concerns should be reviewed with your
GM representative prior to processing the request.
When a customer requests reimbursement, they must provide the following:
A completed Customer Reimbursement Request Form. This form is mailed to the customer
or can be obtained through GM GlobalConnect.
The name and address of the person who paid for the repair.
Page 10
September 2014
Bulletin No.: 14329
Paid receipt confirming the amount of the repair expense, a description of the repair, and
the person or entity performing the repair.
IMPORTANT: GM requires dealers to approve or deny a reimbursement request within 30 days of
receipt. If a reimbursement request is approved, the dealer should immediately issue a check to
the customer and submit an appropriate warranty transaction for the incurred expense. If a
reimbursement request is denied, the dealer MUST provide the customer with a clear and concise
explanation, in writing, as to why the request was denied. The bottom portion of the Customer
Reimbursement Request Form may be used for this purpose. If the denial was due to missing
documents, the customer can resubmit the request when the missing documents are obtained, as
long as it is still within the allowed reimbursement period.
Warranty transactions for customer reimbursement of previously paid repairs are to be submitted
as required by GM Global Warranty Management. Additional information can also be found in
Warranty Administration Bulletin 11-00-89-004.
CUSTOMER REIMBURSEMENT - For Canada and Export
Customer requests for reimbursement of previously paid repairs to correct the condition described
in this bulletin are to be submitted to the dealer prior to or by September 30, 2015. Repairs must
have occurred within the 10 years of the date the vehicle was originally placed in service, or 240,000
kilometers, whichever occurs first.
When a customer requests reimbursement, they must provide the following:
-
Proof of ownership at time of repair.
Original paid receipt confirming the amount of unreimbursed repair expense(s) (including
Service Contract deductibles), a description of the repair, and the person or entity performing
the repair.
All reasonable and customary costs to correct the condition described in this bulletin should be
considered for reimbursement. Any questions or concerns should be reviewed with your GM
representative prior to processing the request.
COURTESY TRANSPORTATION – For US and Canada
The General Motors Courtesy Transportation program is intended to minimize customer
inconvenience when a vehicle requires a repair that is covered by the New Vehicle Limited
Warranties. The availability of courtesy transportation to customers whose vehicles are within the
warranty coverage period and involved in a product program is very important in maintaining
customer satisfaction. Dealers are to ensure that these customers understand that shuttle service
or some other form of courtesy transportation is available and will be provided at no charge. Dealers
should refer to the General Motors Service Policies and Procedures Manual for Courtesy
Transportation guidelines.
Page 11
September 2014
Bulletin No.: 14329
WARRANTY TRANSACTION INFORMATION
Submit a transaction using the table below. All transactions should be submitted as a ZREG
transaction type, unless noted otherwise.
Labor
Code
9900052
9900053
9900054
9900055
Description
Diagnostic Time Only – No Repair Required
Power Steering Pump Replacement (inc. system bleed)
- FWD
- AWD
Add: Install Steering Gear Housing Kit (inc. flush & system bleed)
Add: Diagnostic Time
Customer Reimbursement Approved
Customer Reimbursement Denied - For US dealers only
Labor
Time
0.1-0.3
2.3
4.7
1.5
0.1-0.3
0.2
0.1
Net
Item
N/A
N/A
*
N/A
* The amount identified in “Net Item” should represent the dollar amount reimbursed to the
customer.
CUSTOMER NOTIFICATION
General Motors will notify customers of this special coverage on their vehicles (see copy of typical
customer letter included with this bulletin - actual divisional letter may vary slightly).
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO
NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer/retailer for information on
whether your vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 12
September 2014
Bulletin No.: 14329
September 2014
Dear General Motors Customer:
As the owner of a 2008-2011 model year (MY) Buick Enclave, 2009-2011 MY Chevrolet Traverse,
2007-2011 MY GMC Acadia, or 2007-2010 MY Saturn OUTLOOK, your satisfaction with our
product is very important to us.
This letter is intended to make you aware that some 2008-2011 model year (MY) Buick Enclave,
2009-2011 MY Chevrolet Traverse, 2007-2011 MY GMC Acadia, and 2007-2010 MY Saturn
OUTLOOK vehicles may develop a power steering pump wear condition that can cause an
intermittent drop of power steering hydraulic pressure that will cause reduced or loss of steering
assist. The vehicle may revert to manual steering which requires greater driver effort, particularly
at low vehicle speeds.
Do not take your vehicle to your GM dealer as a result of this letter unless you believe that
your vehicle has the condition as described above.
What We Have Done: General Motors is providing owners with additional protection for the
condition described above. If this condition occurs on your 2008-2011 model year (MY) Buick
Enclave, 2009-2011 MY Chevrolet Traverse, 2007-2011 MY GMC Acadia, or 2007-2010 MY
Saturn OUTLOOK within 10 years of the date your vehicle was originally placed in service or
150,000 miles (240,000 km), whichever occurs first, the condition will be repaired for you at no
charge. Diagnosis or repair for conditions other than the condition described above is not
covered under this special coverage program.
What You Should Do: If you believe that your vehicle has the condition described above, repairs
and adjustments qualifying under this special coverage must be performed by a General Motors
dealer. You may want to contact your GM dealer to find out how long they will need to have your
vehicle so that you may schedule the appointment at a time that is convenient for you. This will
also allow your dealer to order parts if they are not already in stock. Keep this letter with your other
important glove box literature for future reference.
Reimbursement: If you have paid for repairs for the condition described in this letter, please
complete the enclosed reimbursement form and present it to your dealer with all required
documents. Working with your dealer will expedite your request, however, if this is not
convenient, you may mail the completed reimbursement form and all required documents to
Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and
required documents must be presented to your dealer or received by the Reimbursement
Department by September 30, 2015, unless state law specifies a longer reimbursement period.
If you have any questions or need any assistance, just contact your dealer or the appropriate
Customer Assistance Center at the number listed below.
Division
Number
Buick
Chevrolet
GMC
Saturn
Guam
Puerto Rico – English
Puerto Rico – Español
1-800-521-7300
1-800-222-1020
1-800-462-8782
1-800-553-6000
65-6267-1752
1-800-496-9992
1-800-496-9993
Text Telephones
(TTY)
1-800-832-8425
1-800-833-2438
1-888-889-2438
1-800-833-6000
Page 13
September 2014
Virgin Islands
Bulletin No.: 14329
1-800-496-9994
We are sorry for any inconvenience you may experience; however, we have taken this action in the
interest of your continued satisfaction with our products.
Jim Moloney
General Director,
Customer and Relationship Services
Enclosure
14329
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 14329
Replacement Service Bulletin Number:
MFR Communication Date: 2014-09-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STEERING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it. Note: FCA AutoAuth is a third-party service, additional cost may be required.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions without annual fees for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
- 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
This product presentation was made with AAWP plugin.
Last update on 2026-06-05 / Affiliate links / Images from Amazon Product Advertising API