2013 Cadillac SRX
This information replaces the information found under “Memory Seats” found in Section 3 of your
owner manual.

3223109

If equipped, the “1,” “2,” and MEM buttons on the outboard side of the driver seat are used to
manually save and recall the positions of the driver seat, outside mirrors, and adjustable throttle and
brake pedal positions, if available.

Storing Memory Positions
To save positions to the “1” and “2” buttons:
1. Adjust the driver seat, seat back recliner, both outside mirrors, and adjustable pedals, if
available to the desired driving positions.
2. Press and hold MEM (Memory) and “1” at the same time until a beep sounds.
3. Repeat Steps 1 and 2 for a second driver using “2.”

Manually Recalling Memory Positions
Press and hold “1” or “2” to manually recall the previously stored memory positions. Releasing “1” or
“2” before the stored positions are reached stops the recall.
There is also the ability to press and release “1” or “2,” to manually recall the previously stored
memory positions. The ignition must be in ON/RUN/START, and the transmission must be in P (Park).
Placing the ignition in OFF before the stored positions are reached stops the recall.
If something has blocked the driver seat or adjustable pedals while recalling a memory position, the
recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the
memory item that is not recalling for two seconds. Try recalling the memory position again by
pressing the appropriate memory button. If the memory position is still not recalling, see your dealer
for service.

Automatically Recalling Memory Positions (Auto Memory Recall)
The Auto (Automatic) Memory Recall feature automatically recalls the current driver’s previously
stored “1” or “2” position when entering the vehicle.
When the Auto Memory Recall feature is enabled in the vehicle personalization menu, memory “1” or
“2” positions are recalled in the following ways:
To activate the recall when On - Driver Door Open is selected in the personalization menu, do one of
the following:
• On vehicles with RKE, press
on the RKE transmitter and open the driver door.
• On vehicles with keyless access press the lock/unlock button on the outside driver door
handle and open the driver door. The RKE transmitter must be present for the recall to
activate.
• If the driver door is already open, press

on the RKE transmitter to activate the recall.

To activate the recall when On - At Ignition On is selected in the vehicle personalization menu:
• Place the ignition in ON/RUN/START.
See Vehicle Personalization.
To stop recall movement, press one of the memory, power mirror, or power seat controls; or press
the adjustable pedal switch, if available. If On - At Ignition On is selected in the vehicle
personalization menu, placing the ignition in OFF also stops the recall.
If something has blocked the driver seat and/or the adjustable pedals while recalling a memory
position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual
control for the memory item that is not recalling for two seconds. Try recalling the memory position
again by opening the driver door and pressing
on the RKE transmitter. If the memory position is
still not recalling, see your dealer for service.

Easy Exit Recall
If programmed on in the vehicle personalization menu, this feature moves the seat approximately 7
cm (3 in) rearward automatically allowing the driver more room to exit the vehicle.
Easy exit recall automatically activates when one of the following occurs:
• The vehicle is turned off and the driver door is opened within a short time.
• The vehicle is turned off with the driver door open.
See Vehicle Personalization.
To stop the recall movement, press one of the memory, power mirror, power seat controls, or the
adjustable pedal switch, if available.
If something has blocked the driver seat while recalling the exit position, the recall may stop.
Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try
recalling the exit position again. If the exit position is still not recalling, see your dealer for service.

This information replaces the information located under “Capacities and Specifications” found in
Section 12 of your owner manual

Capacities and Specifications
Application
Air Conditioning Refrigerant R134a

Capacities
Metric

English

For the air conditioning system refrigerant
charge amount, see the refrigerant label
located under the hood. See your dealer for
more information.

Engine Cooling System
3.6L V6 Engine

12.8 L

13.5 qt

5.7 L

6.0 qt

Fuel Tank

79.5 L

21.0 gal

Transfer Case Fluid

0.65 L

0.69 qt

190 N·m

140 lb ft

Engine Oil with Filter

Wheel Nut Torque

All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in
this manual. Recheck fluid level after filling,