NHTSA ID Number: 10246282
Manufacturer Communication Number: SRV-TSB-23-012
TSB/Document Date: 2023-12-06
Summary
CR259 – Replacement of the ABS Unit to Rear Brake Caliper Hose. Applicability: Streetfighter V2 Model Year 2023-2024 (all model versions). This technical service bulletin informs dealers and service managers of the availability of new rear brake hoses intended to address wear of the brake lever
stroke, resulting from routine use, over time . Additionally, it emphasizes this is not a mandatory service, but optional and contingent upon client complaint. This bulletin has been redacted for sensitive pricing information.
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
Date:
To:
From:
November 28, 2023
Dealer Principal, General Manager, Service Manager, North American Dealer
Network
Richard Kenton, Technical Director
Dan Schwartz, Service Area Manager
Dear Dealers,
This bulletin is to inform you that, following reports of a slight elongation of the rear brake
lever stroke over time and as a consequence of use, a new rear brake hose (ABS control unit to
rear brake caliper - blue) is now available for the model concerned in order to prevent this
condition.
ABS control unit /
rear brake caliper
hose Part
no.61912002A
We remind you that the rear brake lines must be installed on vehicles if Clients complain
about a slight elongation of the rear brake pedal travel over time and with use.
Always remind Clients that correct brake operation must always be checked before each use of
the motorcycle, as indicated in the Use and Maintenance Manual, and that it is essential to
have the braking systems maintained as prescribed in the maintenance schedule, changing
the brake fluid every 24 months.
Moreover, we inform you that this upgrade is NOT mandatory, but optional since it has to
be performed only if the Client reports such condition.
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
1/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
Contents
Page
1
Introduction
Contents
2
Application
2
Client Impact
2
Spare Parts
3
Parts Distribution
3
Warranty Reimbursement Rules
3
Service Solution
Part 1: Vehicle Preparation
Part 2: Rear Brake Hose Removal
Part 3: New Rear Brake Hose Installation
Part 4: Rear Brake System Filling and Bleeding
Part 5: Vehicle Refitting
Part 6: Rear Brake Pedal Travel Check
4
5
9
10
11
12
18
Application
This update is NOT listed in the DCS VIN HISTORY
We inform you that this upgrade is NOT mandatory, but optional since it must be
performed only if the Client reports such symptom/condition.
If a Client complains about a slight elongation of the rear brake pedal travel over time and
with use, it is necessary to order the replacement parts.
Client Impact
Clients will NOT be notified by dedicated communication.
Involved vehicles must be fitted with the updated rear brake hoses ONLY if the abovedescribed operating concern is detected.
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
2/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
Spare parts
The spare parts required for this update are:
•
ABS control unit / rear brake caliper hose Part no. 61912002A
•
Copper washers part no. 85250241A (10pcs)
•
Small and Big self-locking ties.
The required DOT4 brake fluid and self-locking ties (small and large) are easy to find
consumables and should be sourced locally.
Parts Distribution
The above listed components required to carry out the upgrade under this Workshop
Campaign must be ordered for each affected frame number.
The ties and DOT4 fluid to be used are easy to find consumables, it is not necessary to fill in
any special spare part orders.
Warranty Reimbursement Rules
Rear brake hose installation reimbursement will be issued through the standard warranty
claim procedure via the DCS.
We remind you that this update is NOT listed in the DCS VEHICLE HISTORY, but a NEW
WARRANTY CLAIM must be filled. See procedure illustrated below.
The warranty claim is pre-filled and is identified as CR259.
The Dealer shall be reimbursed for the parts listed for the operation; copper washers (10) part
no. 85250241A, ABS control unit/rear brake caliper hose Part no. 61912002A, the consumable
ties and DOT 4 brake fluid; and labor for
that includes the time
necessary for:
•
Vehicle reception
•
Rear brake hose removal
•
Installation of new rear brake hose
•
Filling and bleeding procedure of the rear brake system
•
Soft cleaning of the vehicle
•
Compensation for the cost of self-locking ties and DOT4 fluid used to fill the rear brake
system.
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
3/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
When creating the WCRC type claim, please fill in the following fields:
1. VIN number: ZDMXXXXXXXXXXXXXX
2. Claim Type: WCRC - WARRANTY CLAIM RECALL CAMPAIGN
3. Recall Campaign: CR259 – SRV-TSB-23-012 REAR BRAKE HOSE REPLACEMENT
Service Solution
WARNING
The replacement procedure of the rear brake hose described in the document is not
particularly difficult, however, for the operation to be completed successfully and to
comply with the set time, it is necessary to thoroughly follow the sequence of the
indicated operations.
We recommend taking your time to fully understand the procedure before
attempting its implementation on the motorcycle (you may print the document in
color for a better understanding).
We also remind you that the work environment where you carry out the procedure
and the tools and equipment used (wrenches and gloves) must be clean.
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
4/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
NOTE
We hereby inform you that this operation is carried out exclusively on the primary
circuit of the rear brake system for which it is sufficient to perform the traditional
bleeding procedure; NO specific bleeding procedure is hence required for the
secondary circuit (circuit inside the ABS control unit).
Part 1: Vehicle Preparation
1. Position the motorcycle on the rear paddock stand.
2. Remove the rear wheel (see Sec. 07: “Chassis - Rear wheel”).
3. Drain all the brake fluid contained inside the rear brake system (see Sect. 04 Maintenance operation - Changing the rear brake circuit fluid).
WARNING
Brake fluid may damage the paint or parts of the motorcycle. Wash the affected
area with plenty of water in case of accidental contact. Damage due to brake fluid
spillage is not a warrantable defect and is the responsibility of the repairing dealer
to correct.
4. Remove the upper RH fairing (see Sec. 05: "Fairing installation - Fairing" of the Workshop
Manual).
5. Loosen the 3 special screws M5x10.5 (1) securing the hose guide (2) on the swing arm.
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
5/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
6. Loosen the 4 special screws M5x9 (3) and remove the rear mudguard (4).
7. Loosen the screw M6x14 (6) and move the rear brake fluid reservoir (11) away from the
hose grommet (10).
Loosen the 3 special nuts M5x11 (7) and remove the button tie (5).
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
6/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
8. Slide out the lambda sensor connector (8) and remove the hose grommet (10).
NOTE
Recover the 3 washers (9).
9. Disconnect the pressure switch (12) and remove the button tie (13).
Ducati North America
www.ducati.com
1292 Reamwood Ave.
Sunnyvale CA, 94089
Tel +1 650 933 9899
7/19
CR259 – Replacement of the ABS Unit to Rear
Brake Caliper Hose
Streetfighter V2 Model Year 2023-2024 (all model
versions)
Technical Service Bulletin SRV-TSB-23-012
10. Remove the 2 small self-locking ties (18) that tie the ABS control unit / rear brake caliper
hose (15) to:
•
•
main wiring RH rear upper branch
secondary air actuator wiring branch
11. Remove the 2 small self-locking ties (20) that tie the ABS control unit / rear brake caliper
hose (15) to:
•
•
the rear speed sensor cable
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock...
- Ideal for hydraulic and disc brakes
- Provides an extra margin of safety in extreme braking...
- Mix of polyglycol ethers ensures hot brake-system operation...
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy...
- Both wet and dry boiling points exceed the minimum...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SRV-TSB-23-012
Replacement Service Bulletin Number:
MFR Communication Date: 2023-11-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SERVICE BRAKES, HYDRAULIC
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.