Bulletin No.:

Service Bulletin

Date:

20-NA-168
November, 2023

INFORMATION
Subject:

Information on Servicing the 1LE Vinyl Hood Wrap
This bulletin replaces PIC6254E. Please discard PIC6254E.

Brand:

Model:

Chevrolet

Camaro

Model Year:

VIN:

from

to

from

to

2017

2024

—

—

Involved Region or Country

A1X (1LE) or A1Y (SS) or
A1Z (ZL1)

North America

Information
All 2017–2024 Camaro 1LE cars come equipped with a
vinyl hood wrap that is applied before the cars arrive at
the dealership. Some dealerships may be looking for
additional information on this wrap when it comes to
care, cleaning or, in some situations, replacement of
the entire hood wrap.
These hood wraps are all made of a matte finished vinyl
material and all of them are black in color. They can be
damaged if they are not cared for properly. The most
common concerns are smudges or stains that are
usually the result of fingerprints, improper cleaning
practices, and/or products or leaves that remain on the
car and create an outline on the vinyl. In some
situations, the customer may even comment about
small rips / other physical damage to the wrap itself.
If any suspect damage is found on one of these hood
wraps, dealerships are to first attempt to clean the hood
before taking any other action. Hand washing is
recommended using a mild detergent and water.
Immediately rinse the vehicle and dry the graphic with a
soft squeegee and/or soft cloth to help restore the
graphic's luster. Touchless car washing systems may
be used. To avoid water spotting on graphic, always go
through the drying cycle. To remove tar and bugs from
the graphic, use a commercial cleaner designed for
such use, but do not rub vigorously. Immediately wash
with a mild detergent / water solution, rinse with water,
and dry.

Copyright 2023 General Motors LLC. All Rights Reserved.

Additional Options (RPOs):

If the concern remains and it is determined a new hood
wrap is needed, the 1LE hood wrap (Hood Wrap Decal)
can be obtained through GM CCA Parts. All 1LE's use
the same part number hood wrap. It will be necessary
to cut the holes in the hood wrap to accommodate any
hood vents or heat extractors, however, the 1LE hood
wrap must be installed by a certified "wrap" technician.
If your dealership/body shop does not have a certified
installer, contact Ryan Scislowicz at Kay Automotive
Graphics. Ryan can be contacted by email at
([email protected]). He will be able
to direct the dealership to the local certified installer. If
the repairs are covered under the terms of the New
Vehicle Limited Warranty, photos of the entire car and
localized damage to the hood wrap should be taken
and submitted as a Field Product Report.
Note: The labor times have been updated for certain
models. The V8 cars have increased labor times as the
dealership / technician will now be responsible for
removing and reinstalling the hood insert / hood vents
on the vehicle. This will no longer be done by the
"wrap" technician.

Parts Information
A decal is not always required for this repair.
Causal
Part

Description

Part
Number

Qty

X

Decal - Hood

84406072

1

Page 2

November, 2023

Bulletin No.: 20-NA-168

Warranty Information
For vehicles repaired under the Bumper-to-Bumper
coverage (Canada Base Warranty coverage), use the
following labor operation. Reference the Applicable
Warranties section of Investigate Vehicle History (IVH)
for coverage information.
Labor
Operation

Description

1480768*

Installation of 1LE
Hood Wrap

Labor Time
A1X - 3.0 hrs
A1Y - 4.0 hrs
A1Z - 4.0 hrs

*This is a unique Labor Operation for bulletin use only.

Version

5

Modified

Released September 18, 2020
Revised June 24, 2021 – Updated the Contact Information within the bulletin.
Revised November 03, 2021 – Added the 2022 Model Year.
Revised December 19, 2022 – Added the 2023 Model Year.
Revised November 17, 2023 – Added the 2024 Model Year.

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a
job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.

WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION