NHTSA ID Number: 10245468
Manufacturer Communication Number: T-SB-0070-19 Rev
TSB/Document Date: 2023-11-27
Summary
TSB: Some 2015 ? 2023 model year TRD
Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0070-19
Rev1
June 20, 2019
TRD Pro Bumper/Fender Interference
Service
Category
Section
Market USA
Applicability
YEAR(S)
MODEL(S)
2015 - 2023
4Runner
ADDITIONAL INFORMATION
REVISION NOTICE
October 16, 2023 Rev1:
Applicability has been updated to include 2021 – 2023 model year 4Runner vehicles.
Any previous printed versions of this bulletin should be discarded.
SUPERSESSION NOTICE
The information contained in this bulletin supersedes Service Bulletin No. T-SB-0009-15.
Applicability has been updated to include 2019 and 2020 model year 4Runner vehicles.
Service Bulletin No. T-SB-0009-15 is obsolete, and any printed versions should be discarded.
Introduction
Some 2015 – 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise
when in Reverse with the wheels at or near full lock due to interference between the tire and
bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
BD1505
Fender/Bumper Trim Modification
1.0
52119-#####*
91
57
*Warranty claim MUST be submitted with the correct 10-digit OFP. Choose the correct OFP for the vehicle being repaired
by searching for the parts in the Electronic Parts Catalog using the VIN filter.
APPLICABLE WARRANTY
This repair is covered under the Toyota Basic Warranty. This warranty is in effect for
36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date.
Warranty application is limited to occurrence of the specified condition described in
this bulletin.
© 2023 Toyota Motor Sales, USA
Page 1 of 18
T-SB-0070-19
Rev1
June 20, 2019
Page 2 of 18
TRD Pro Bumper/Fender Interference
Parts Information
PART NUMBER
PREVIOUS
PART NAME
QTY
1
NEW
PTR25-89150
*CONTENTS OF 4RUNNER TRD PRO TRIM KIT
QTY
LH and RH Bumper Cover Marking Templates
1 Each
3M™ Foam Sanding Block
1
Clamp
1
Modified Channellock Cutting Plier
1
LH and RH Metal Fender Liner Templates
1 Each
Double-sided Foam Tape
1
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
Plastic Pry Tool Kit*
00002-06020-01
1
*Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
REQUIRED TOOLS & MATERIAL
QUANTITY
Electric Drill
1
Step Drill Bit
1
Wax Pencil
1
Center Punch
1
Cutters
1
Lint-free Cloth
1
As Needed
© 2023 Toyota Motor Sales, USA
T-SB-0070-19
Rev1
June 20, 2019
Page 3 of 18
TRD Pro Bumper/Fender Interference
Repair Procedure
Fender Liner Modification
1. Confirm the abnormal noise condition described in the Introduction.
2. Remove the front wheels.
3. Beginning with the driver side, remove the two fasteners on the lower side of the fender liner.
Figure 1.
4. Unclip the fender liner and carefully pull it
toward the rear of the vehicle.
Figure 2.
© 2023 Toyota Motor Sales, USA
T-SB-0070-19
Rev1
June 20, 2019
Page 4 of 18
TRD Pro Bumper/Fender Interference
Repair Procedure (continued)
Fender Liner Modification (continued)
5. Install the driver-side metal fender liner template (from the TRD Pro trim kit) on the front side
of the fender liner.
NOTE
Make sure to place the alignment pins into the two existing holes.
Figure 3.
Figure 4.
© 2023 Toyota Motor Sales, USA
T-SB-0070-19
Rev1
June 20, 2019
Page 5 of 18
TRD Pro Bumper/Fender Interference
Repair Procedure (continued)
Fender Liner Modification (continued)
6. Use a wax pencil to outline two NEW holes and the area to be removed.
Figure 5.
7. Use a center punch to mark the center of the two holes and remove the template.
© 2023 Toyota Motor Sales, USA
T-SB-0070-19
Rev1
June 20, 2019
TRD Pro Bumper/Fender Interference
Repair Procedure (continued)
Fender Liner Modification (continued)
8. Using cutters, remove the marked plastic area as shown.
Figure 6.
Figure 7.
1
Before Cut
2
After Cut
© 2023 Toyota Motor Sales, USA
Page 6 of 18
T-SB-0070-19
Rev1
June 20, 2019
Page 7 of 18
TRD Pro Bumper/Fender Interference
Repair Procedure (continued)
Fender Liner Modification (continued)
9. Using the step drill bit, drill two holes in the fender liner at the identifying marks.
NOTE
Set the drill stop to 5/16 in. – 3/8 in. (8 mm – 9 mm) and drill both sides to remove the flash from the
fender liner.
Figure 8.
10. Repeat the same procedure for the passenger side.
NOTE
Make sure to use the passenger side template.
© 2023 Toyota Motor Sales, USA
T-SB-0070-19
Rev1
June 20, 2019
Page 8 of 18
TRD Pro Bumper/Fender Interference
Repair Procedure (continued)
Front Bumper Cover Modification
- 【Perfect Emergency Repair Solution】This kit includes...
- 【Premium Materials for Safe Repairs】Our tire screw plugs...
- 【2 Sizes for Every Puncture】Choose the right size for...
- 【5-Minute DIY Repair】Skip the auto shop and fix flats...
- 【Emergency-Ready Design】Compact & ready for...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0070-19 Rev
Replacement Service Bulletin Number:
MFR Communication Date: 2023-10-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: WHEELS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.