NHTSA ID Number: 10244899
Manufacturer Communication Number: 15-130-08R
TSB/Document Date: 2023-11-06
Summary
This bulletin details an important regulation issued by the National Highway Traffic Safety Administration (NHTSA) which impacts the way some vehicles with accessories are sold.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2008 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY: All New Vehicles Sold On or After
June 2, 2008 (if applicable)
SUBJECT:
NUMBER:
Load Carrying Capacity Reduced Label
15-130-08R
DATE:
07/23/08
REVISED:
11/02/20
INTRODUCTION
This bulletin details an important regulation issued by the National Highway Traffic Safety
Administration (NHTSA) which impacts the way some vehicles with accessories are sold. This
regulation applies to any automobile retailer installing accessories on a vehicle prior to its first sale.
INFORMATION
Beginning June 2, 2008, NHTSA started requiring a new label showing the reduction in load carrying capacity resulting from the installation of accessories when the total weight of the accessories
installed is more than 1.5 percent of the vehicle’s gross vehicle weight rating (GVWR) or 100 lbs.,
whichever is less. When calculating the total accessory weight, the combined weight of all port-installed accessories and all retailer-installed accessories must be included. The label only needs to be
applied when accessories are installed before or at the time the vehicle is first sold.
A label is not required when the total weight of the accessories is below the limit or when accessories
are installed at a later time.
NOTE: Any person who fails to comply with this NHTSA-mandated safety requirement may be
liable to the United States Government for a civil penalty of not more than $6,000 for each violation.
Each vehicle failing to meet the requirement is considered as a separate violation.
When is the label required?
A label is required whenever the combined weight of port-installed
accessories and retailer-installed accessories exceeds 1.5 percent of
GVWR or 100 pounds, which ever is lower. When retailers
install accessories that change the vehicle gross weight
beyond this specified range, they must apply the Load
Carrying Capacity Reduced Label in the driver’s door
jamb. The label must be applied within 25 mm (approximately 1 in.) of the existing tire and loading information
label (or as close as possible without covering any other
important labels).
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru
Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru
of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international
standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-130-08R; Revised: 11/02/20
Page 1
Fill in the total reduction in load carrying capacity (either in kg or lbs.) with a permanent marker.
The customer should be notified of the vehicle’s reduced load carrying capacity and shown the new
label indicating the amount of the reduction.
Examples of 2019 and 2020MY Subaru
vehicles and 1.5 percent of their GVWR (provided for
purposes of illustration only):
2019MY Vehicles
GVWR
(LBS)
Maximum Weight of
Accessories (LBS)
2020MY Vehicles
GVWR
(LBS)
Maximum Weight of
Accessories (LBS)
Ascent
6000
90
Ascent
6000
90
BRZ (MT)
3682
55.2
BRZ (MT)
3682
55.2
BRZ (AT)
3748
56.2
BRZ (AT)
3748
56.2
Crosstrek
4343
65.1
Crosstrek
4343
65.1
Crosstrek Hybrid![]()
4901
73.5
Crosstrek Hybrid![]()
4901
73.5
Forester
4891
73.4
Forester
4891
73.4
Impreza 4-Dr and 5-Dr
4299
64.5
Impreza 4-Dr and 5-Dr
4299
64.5
Legacy 2.5L
4519
67.8
Legacy 2.5L
4630
69.5
Legacy 3.6L
4629
69.4
Legacy 2.4L Turbo
4806
72.1
Outback 2.5L
4695
70.4
Outback 2.5L
4850
72.8
Outback 3.6L
4850
72.8
Outback 2.4L Turbo
5026
75.4
WRX / WRX-STI
4409
66.1
WRX / WRX-STI
4409
66.1
Vehicle Weight
Gross Vehicle Weight (GVW) information can be found in the Service Manual under: General
Description > Specifications > Weight.
Accessory Weight
Accessory weight information can be found in the RPM System (Subaru
Retail Parts Management)
on www.subarunet.com. Under Part Inquiry, there is a tab for Attributes listing the accessory weight
in lbs.
Continued...
Bulletin Number: 15-130-08R; Revised: 11/02/20
Page 2
It is the retailer’s responsibility to confirm the actual GVWR from the vehicle certification label
located on the driver’s door jamb and calculate the accessory weight threshold. The retailer must
also confirm the actual total weight of the accessories being installed (including the total weight of
any port installed accessories already present on the vehicle) less any parts being removed during
the installation. (Example: when installing the accessory trailer hitch on a 2020MY Outback, the
rear bumper beam is removed and discarded. Use RPM to determine the bumper beam weight.) This
calculation will determine if the total weight added to the vehicle as a result of accessory installation
exceeds the label requirement threshold.
Where can I purchase the labels?
Labels stating “Load Carrying Capacity Reduced” are commercially available. Below are two sources
for these labels:
Dec-O-Art
www.dec-o-art.com
Phone
: (800) 225-6879 or
(574) 294-6451
Order part number FD-317
National Truck Equipment Association
www.ntea.com
Phone
: (800) 441- 6832 or
(248) 489-7090
Order part number 2246
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 15-130-08R; Revised: 11/02/20
Page 3
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-130-08R
Replacement Service Bulletin Number:
MFR Communication Date: 2023-10-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS
Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS
Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first - Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS
/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS
/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities. - 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning
lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees. - 【✨6 Essential Resets: ABS
Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming. - 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




