Ls
Ls
VuriPPERT AWNING FABRIC REPAIR KIT S
Ez
AWNINGS
Purpose
This document outlines repair procedures for the Awning Fabric Repair Kit PN 2022108227 (Fig. 1). The
repair kit contains enough product for 10 - 15 awning repairs.
Q,
(7
The repair kit covefé:three applications:
+ Seam Separation“Awning Seam Repair Adhesive - PN 2022107896
+ Scratch/Scuff Repair Awning Color Pen - PN 2022107897
+ Pinhole Repair - Vibra-TITE® Awning Pinhole Repair - PN 2021011778 (black) and 2021011776 (white)
+ Fabric Repair Patch (Not Shown)
Fig. 1
aa we
E
ce 8
Safety
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death, serious personal injury or product and/or property damage if not performed safely and
within the parameters set forth in this manual.

Repair compounds can be highly flammable. Do not use around open flame or other heat sources.
Repair compounds may cause eye and skin irritation. May also cause drowsiness and dizziness. Use in a well-
ventilated area as prolonged exposure to fumes can cause irritation to nose, mouth, throat and respiratory
system. FOLLOW THE SAFETY PRECAUTIONS ON THE LABEL BEFORE USING THE REPAIR COMPOUNDS.
The "CAUTION" symbol above is a sign that a procedure has a safety risk involved and may cause
personal injury, product and/or property damage if not performed safely and within the parameters
set forth in this manual.

Always use personal protective equipment (PPE) such as gloves and eye protection when working
with chemical compounds.
Rev: 07.07.2023 Page 1 CCD-0006982

Ls
Ls
VuriPPERT AWNING FABRIC REPAIR KIT S
Ez
AWNINGS
Seam Separation
Resources R@quired
+ Awning Seam Repair Adhesive PN 2022107896 (Fig. 2)
+ Mild soap and watey
+ Ladder, if needed, to-reach the awning rail or roll tube
Seam Separation Repair Procedure
NOTE: The repair procedure is optimal for 6 to 8" seam separations or less.
1. Extend the awning:
A. Foraseam fix at the awning rail, extend the awning a few feet.
B. Foraseam fix at the roll tube, extend the awning completely.
2. Tie both awning arms slightly back to gain some slack in the fabric.
3. Clean the area to be repaired with mild soap and water. Allow to dry completely.
4. Spread open the seam area needed repair and apply a continuous bead of Awning Seam Repair
Adhesive PN 2022107896 along the entire separation (Fig. 4).
5. Press down firmly and hold for several minutes.
6. Allow at least four hours for adhesive to dry.
Fig. 2 Fig. 3
Le = Fa ae
2 ~ <a aid 7 war” & |
i -w \\\ 2 “g ee |
hy: r
3 re regia — |
a Ney =
] a Par Sl
Seam needing .
¢ repair
aL
ol Polycords
NOTE: Photo shows fabric off awning for clarity and
upside down. The repair can be completed with
the awning fabric installed.
Fig. 4
Py
5oN'
— 2
A
Rev: 07.07.2023 Page 2 CCD-0006982

Ls
Ls
CJ LiPPERT AWNING FABRIC REPAIR KIT S
Ez
AWNINGS
Seam Separation at Weld
Resources Required
+ Awning Seam Repair Adhesive PN 2022107896 (Fig. 2)
+ Mild soap and water,
+ Ladder, if needed, teach the awning rail or roll tube
Seam Separation Repair Procedure
NOTE: The repair procedure is for tears at the light rail by the weld that are 6" or less (Fig. 5).
1. Open the awning up about 12 inches and tie wrap the arm to the frame to take the tension off the
fabric. The patch will be applied to the top of the awning on the fabric and weld seam.
2. Clean the tear areas (Fig. 6)
Tra} CAS
( /
A y i. BBN Re
2 2»
3. Test fit (Fig. 7) and cut awning patch pieces to match area (Fig. 8).
Fig. 7 Fig. 8
Toi
CO
tae nt t a
ee ee }
| :
ee
ANE | :
ae me ’
Se oi
SS
Rev: 07.07.2023 Page 3 CCD-0006982

Ls
Ls
CJ UiPPERT AWNING FABRIC REPAIR KIT SI
Ez
AWNINGS
4. Use awning adhesive (Fig. 9) to place a bead of glue in a loose "Z" Shaped pattern around the tear (Fig. 10).
ron Fig.9 aC uy
hee |
ee |
Ky oe Nal
Me Nl
° Ca |
: Ea Aone
E — er Pi
= ices | |
fr
5. Place patch across the tear (Fig. 11) and hold for several seconds (Fig. 12).
ST
wm
il
i ea it
Be pe ah
| |
cy |
ea |
rT |
ee) |
ree
6. The repair should be on the top of the awnings and should be complete (Fig. 13). Allow at least four
hours for adhesive to dry before retracting the awning.
Fig. 13
Rev: 07.07.2023 Page 4 CCD-0006982

Ls
Ls
CJ LiPPERT AWNING FABRIC REPAIR KIT S
Ez
AWNINGS
Fabric Scratches
Resources Required
+ Awning Color Pan PN 2022107897 (Fig. 14)
+ Mild soap and water,
+ Ladder, if needed, to¥each awning fabric
Fabric Scratch Repair Procedure
1. Extend the awning to expose any small scratches or scuff marks.
2. Clean the area to be repaired with mild soap and water. Allow to dry completely.
3. | Shake the Awning Color Pen and then press the tip on a hard, disposable surface enough times to get
the pen liquid flowing (Fig. 15).
4. Gently apply the pen tip to the scratched or scuffed area on fabric (Fig. 16). If excess color is expelled,
use finger to gently dab at the excess.
5. Allow to dry before retracting the awning.
i at ae) ta)
} en
| Dn
i te pee
5 ped Ele ee
& eee
s
iE
ei
)
Rev: 07.07.2023 Page 5 CCD-0006982

Ls
Ls
VYuiPPERT AWNING FABRIC REPAIR KIT Ss
Ez
AWNINGS
Pinholes
Resources Rg uired
+ Vibra-TITE® Awning Pinhole Repair - PN 2021011778 (black) and 2021011776 (white) (Fig. 17)
+ Mild soap and water,
+ Ladder, if needed, téeach the awning fabric
Pinhole Repair Procedure
NOTE: Voids up to ¥" in size can be repaired using this method.
1. Clean the area to be repaired with mild soap and water. Allow to dry completely.
NOTE: Be sure to vigorously shake the Vibra-TITE compound before applying.
2. Place a drop of the vinyl repair compound over the void in the awning.
NOTE: Larger voids may require two or three drops to cover the void area.
3. Allow compound to dry for 20 minutes. When the compound is completely dry, it will be flexible and
will not smear or rub off when the awning is retracted. Apply a second coat, if needed.
4. Repeat steps 1 and 2 for other voids in the awning.
Fig. 17
Ii
S
;
Asa supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are
our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at [email protected].
Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.