NHTSA ID Number: 10240152
Manufacturer Communication Number: A8723452041717_9
TSB/Document Date: 2023-08-04
Summary
This bulletin provides information on the GFF test plan required when replacing the A/C compressor.
Technical Service Bulletin
87 GFF test plan required for A/C compressor replacements regardless of concern
87 23 45 2041717/9 July 19, 2023. Supersedes Technical Service Bulletin Group 87 number 22-27 dated May 6,
2022 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
All Audi
Models
2010 – 2024
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
9
-
Revised header (Added Model Year 2024)
8
05/06/2022
Revised header (Added Model Year 2023)
7
09/14/2021
Revised header (Added Model Year 2022)
Revised Service (Clarification of test plan location in ODIS including BEV
and PHEV vehicles)
Revised Service (Remove TAC contact requirement)
This bulletin applies to any repair that requires the replacement of the air conditioning compressor.
Technical Background
Any replacement of A/C compressors—regardless of the reason for failure—must include an ODIS GFF cooling
performance test plan (Function Test Log version) of the A/C system with documentation of the recovered
refrigerant volume. This GFF test plan requirement is mandatory without exception.
Production Solution
Not applicable.
Service
Before replacing the A/C compressor, run the ODIS GFF test plan. The test plan is in various locations in the
navigation depending on the vehicle being serviced. Since the A/C cooling performance test is a ‘function test’ it
is generally found by navigating to sub-headers such as ‘functions’, ‘other functions’, or ‘general function tests’ in
Page 1 of 4
© 2023 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
either 08 - Heating and Air Conditioning Electronics or in C5 – Thermal Management Control Module in the case
of BEV and PHEV vehicles. The test plans are generally navigated in the following examples:
Vehicles with 08 - Heating and Air Conditioning Electronics:
1. Navigate to the Guided Functions tab of the diagnosis program, Select 08 – Front A/C display control head –
E87- >> 08 Heating/Air Conditioning Electronics, functions >> 08-Other Functions.
Skip to Step 2.
Or
1. Navigate to the Test plan tab of the diagnosis program, Select Body >> Heating / Air Conditioning >> 01 –
On Board Diagnostic (OBD) capable systems >> 08 Climatronic control module, functions J255 >> 08General function tests.
Skip to Step 2.
BEV Vehicles with C5 - Thermal Management Control Module:
1. Navigate to Diagnostic capable system >> 00C5 - Thermal Management Control Module -J1024- >> 00C5 Thermal management control module, functions >> 00C5 - Basic Setting >> 00C5 - Basic setting complete.
Skip to Step 2.
PHEV Vehicles with C5 - Thermal Management Control Module:
1. Navigate to Body >> Heating / Air Conditioning >> 01 - On Board Diagnostic (OBD) capable systems >> C5 Thermal Management Control Module -J1024- >> 00C5 – Thermal management control module, functions
>> 00C5 - Basic Setting >> 00C5 - Basic setting complete.
2. Once the function test has been added to the list of “Tests in current test plan” select “Vehicle is not cooling”.
3. The cooling system performance test plan can then be completed following the prompts.
4. If the A/C performance test returns “No malfunctions”, then no repairs are needed. The system is operating
properly.
If the A/C performance test returns a malfunction, perform diagnosis and repair the system as needed. If the
compressor is found to be faulty according to the test plan and is replaced please:
• Upload a final protocol of the Diagnostic Log to GFF Paperless.
• Print out and attach the “Function Test” version of the diagnostic log to the replaced compressor for return
to the WPRC. It is not necessary to print and attach the complete diagnostic log. Only the test plan
section is required.
Note:
As previously mentioned the cooling performance test plan is in various locations in the navigation depending on
the vehicle and equipment level. This variation in test plan location does not in any way waive the requirement
Page 2 of 4
© 2023 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
for this test plan to be run before an air conditioning compressor is replaced. If the test plan is missing or cannot
be found in ODIS please file an ODIS Feedback.
Note:
All other applicable bulletins apply. See TSB 2035582: 87 A/C compressor replacement for information on
required documentation of recovered refrigerant volume up to and including MY2017.
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
8734
Damage Code:
0016
Diagnostic Time:
GFF
0150 0000
Time stated
on the
diagnostic
protocol (Max
100 TU)
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Claim Comment:
As per TSB 2041717/9
All warranty claims submitted for payment must be in accordance with the Audi
Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi
Warranty.
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2035582, 87 A/C compressor replacement.
All parts and service references provided in this TSB (2041717) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
Page 3 of 4
© 2023 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
©2023 Audi
of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi
of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
Page 4 of 4
© 2023 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A8723452041717_9
Replacement Service Bulletin Number:
MFR Communication Date: 2023-07-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge
/Jeep
/Fiat
2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW
, VW
, Au-di, Benz, Porsche
, Toyota
, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




