NHTSA ID Number: 10238706
Manufacturer Communication Number: ONP08
TSB/Document Date: 2023-07-06
Summary
ONP08 - 2023 CX-50 OWNERS MANUAL CONCERN - LEAFLET INSERT - The Owners Manual for certain CX-50 vehicles does not contain instructions as summarized below, which could cause a customer to not properly understand certain operating procedures and warnings/cautions. Therefore, we sent a leaflet with updated information to certain CX-50 vehicles. This campaign is not a recall or special service program and no repair is required. Below is a summary of the leaflet and updated (missing) instructions: Operating procedures for the front passenger power seat (slide, recline & height adjustment) Operating procedures for the remote handle of rear seats, warnings & caution indications Warning when operating the power folding outside mirror Function overview, warnings & caution about Trailer Stability Control (TSC)
MAZDA
CX-50 Owner’s Manual Leaflet
This leaflet contains additional information concerning the following:
· Adjusting the Front Passenger's Seat
· Split Folding the Seatbacks
· Outside Mirrors
· Trailer Stability Control (TSC)
Please keep this leaflet with the owner's manual.
MAZDA
CX-50 Feuillet du Manuel Conduite et Entretien
Ce feuillet contient des informations supplémentaires concernant ce
qui suit :
· Réglage du siège passager avant
· Dossiers de siège rabattables séparément
· Rétroviseurs extérieurs
· Commande de stabilité de remorque (TSC)
Prière de conserver ce feuillet avec le Manuel Conduite et Entretien.
MAZDA
CX-50 Folleto del manual para el propietario
Este folleto contiene información adicional sobre lo siguiente:
· Ajuste del asiento del acompañante
· Plegado de los respaldos de asiento
· Espejos exteriores
· Control de estabilidad de tráiler (TSC)
Guarde este folleto junto con el manual para el propietario.
Form No. P005/22M
©2022 Mazda
Motor Corporation
Printed in U.S.A.
Adjusting the Front Passenger's
Seat
Power seat
Split Folding the Seatbacks
Lowering the seatbacks
Using remote handle*
1. After checking that the rear seats
are clear, open the liftgate and
lower the seatback you want to
fold down using the remote
handle.
WARNING
1. Seat Slide
To slide the seat, move the slide
lifter switch on the outside of the
seat to the front or back and hold
it.
Release the switch at the desired
position.
2. Seat Recline
To change the seatback angle,
press the front or rear side of the
reclining switch. Release the
switch at the desired position.
Always remove the child-restraint
system from the rear seat before
operating the remote handle for
the rear seat:
Operating the remote handle while
a rear-facing child-restraint system
is in the rear seat is dangerous.
It could cause injury to a child
seated in the child-restraint system
when the seatback suddenly flips
forward.
3. Height Adjustment
To adjust the seat height, move
the slide lifter switch up or down.
Release the switch at the desired
position.
* Some models.
2
Make sure there is nobody in the
rear seat area before operating
(pulling) the remote handle:
Outside Mirrors
Folding outside mirror
Power folding outside mirror
Not checking the rear seat area for
persons before folding the
seatbacks with the remote handle is
dangerous.
The rear seat area is difficult to see
from the rear of the vehicle.
Operating (pulling) the remote
handle without checking could
cause injury to a person when a
seatback suddenly flips forward.
Do not touch a power folding
outside mirror while it is moving:
Touching the power folding outside
mirror when it is moving is
dangerous.
Your hand could be pinched and
injured or the mirror could be
damaged.
CAUTION
Before folding the seatbacks down
with the remote handle, make sure
there is no cup in a rear cup
holder.
Folding the seatbacks with the
remote handle while a cup is in the
cup holder could soil or damage
the seat bottom and seatback.
Be careful of the following when
using the remote handle:
On a downward slope, the
seatback could flip forward faster
than on a flat surface.
On an upward slope, the
seatback may not fold down.
When the seatbacks cannot be
folded down with the remote
handle, pull the rear seatback
forward from inside the vehicle.
3
WARNING
Use the switch to set the mirror to
the on-road position:
Setting the power folding outside
mirror to the on-road position by
hand is dangerous.
The mirror will not lock in position
and will prevent effective rearview
visibility.
Only operate the power folding
outside mirror with the vehicle
safely parked:
Operating the power folding
outside mirror while the vehicle is
moving is dangerous.
Wind blast on the mirror will cause
them to collapse and you will be
unable to return it to the on-road
position, preventing rearview
visibility.
The ignition must be switched to
ACC or ON position.
To fold the mirrors, press the
outside mirror folding switch.
To return the mirrors to their
on-road positions, press the switch
again.
・In the following cases, the outside
mirrors do not fold out
automatically.
Press the outside mirror folding
switch to fold out the outside
mirrors.
・Pressing the outside mirror folding
switch to fold in the outside
mirrors. *1
・Disconnecting the battery
terminals after the outside mirrors
fold in automatically.
*1 When the automatic folding function is
changed from off to on after folding in the
outside mirrors, the outside mirrors fold out
automatically.
Automatic folding function
When the ignition is switched to
OFF, the outside mirrors
automatically fold in and out when
the doors are locked and unlocked.
Also, when the ignition is switched
ON or the Engine is started, the
outside mirrors fold out
automatically.
NOTE
・The outside mirrors may not fold in
and out automatically under cold
weather conditions.
If the outside mirrors do not fold in
and out automatically, remove any
ice or snow, and then press the
outside mirror folding switch to fold
the outside mirrors in or out.
・The automatic folding function can
be turned on or off.
Refer to the Settings section in the
Mazda
Connect Owner's Manual.
4
Trailer Stability Control
(TSC)
Trailer Stability Control (TSC)
If the vehicle sways while being
driven and towing a trailer, the TSC
automatically controls braking and
engine torque to suppress the
swaying and enhance vehicle
stability.
The TSC is operable at a vehicle
speed of about 65 km/h (40 mph)
or more.
When the TSC operates while driving
the vehicle, the TCS/DSC indicator
light flashes.
Refer to TCS/DSC Indicator Light.
WARNING
Do not rely solely on the TSC
Assured vehicle stability is limited
even if the TSC is operating.
Drive carefully to prevent accidents.
In particular, if the TCS/DSC
indicator light is flashing, drive the
vehicle carefully as it is in a less
stable condition and could sway
more easily.
Drive with caution and in
accordance with the road, vehicle
and trailer conditions.
5
CAUTION
The TSC may not operate correctly
unless the following are observed:
Use tires of the correct size
specified for your Mazda
on all
four wheels.
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Do not mix worn tires.
The TSC may not operate correctly
when tire chains are used or a
temporary spare tire is installed
because the tire diameter changes.
NOTE
・The TSC uses the TCS/DSC
functions.
The TSC does not operate if there
is a malfunction in the TCS/DSC
(the TCS/DSC indicator light turns
on).
・When the TSC is operating, the
brake lights may turn on.
・For information regarding trailer
towing, refer to Trailer Towing
(U.S.A. and Canada).
Réglage du siège passager avant
Sièges électriques
Relâcher la commande lorsque le
siège est à la position désirée.
Dossiers de siège rabattables
séparément
Abaisser les dossiers de siège
Utilisation de la poignée à distance*
1. Après avoir vérifié qu'il n'y a rien
sur les sièges arrière, ouvrir le
hayon et abaisser le dos du siège
que vous voulez plier en utilisant
la poignée à distance.
1. Réglage longitudinal du siège
Pour faire coulisser le siège,
déplacer la commande située du
côté extérieur du siège vers l'avant
ou vers l'arrière et la maintenir
dans cette position.
Relâcher la commande lorsque le
siège est à la position désirée.
2. Réglage de l'inclinaison du dossier
Pour changer l'angle du dossier
de siège, appuyer sur l'avant ou
l'arrière de la commande
d'inclinaison. Relâcher la
commande lorsque le siège est à
la position désirée.
3. Réglage de la hauteur
Pour régler la hauteur du siège,
déplacer l'interrupteur de levage à
glissière vers le haut ou vers le bas.
PRUDENCE
S'assurer de toujours retirer le
dispositif de retenue pour enfant du
siège arrière avant d'utiliser la
poignée à distance du siège arrière :
L'utilisation de la poignée à
distance lorsqu'un dispositif de
retenue pour enfant faisant face
vers l'arrière est installé sur le siège
arrière est dangereuse.
Cela peut causer des blessures à
l'enfant assis dans le système de
dispositif de sécurité pour enfants
lorsque le dossier du siège se rabat
vers l'avant soudainement.
*Certains modèles.
6
S'assurer de vérifier que personne
ne se trouve dans la zone des
sièges arrière avant d'utiliser (de
tirer) la poignée à distance :
Le fait de ne pas vérifier si des
personnes se trouvent près des
sièges arrière avant de replier les
dossiers du siège à l'aide de la
poignée à distance est dangereux.
L'espace autour des sièges arrière
est difficile à voir de l'arrière du
véhicule.
Le fait d'utiliser (de tirer) la poignée
à distance sans vérifier peut causer
des blessures à un occupant lorsque
le dossier du siège se rabat vers
l'avant soudainement.
ATTENTION
Avant de replier les dossiers du siège
à l'aide de la poignée à distance,
s'assurer qu'il n'y ait pas de verre
dans l'un des porte-verres arrière.
Replier les dossiers du siège à l'aide
de la poignée à distance si un verre
est présent dans le porte-verres
pourrait salir ou abîmer le coussin et
le dossier du siège.
Faire attention aux points suivants
lors de l'utilisation de la poignée à
distance :
Sur une descente, le dossier du
siège peut se replier plus
rapidement qu'à l'horizontale.
Sur une montée, le dossier du
siège peut ne pas se replier.
Lorsque les dossiers du siège ne
peuvent pas être repliés en
utilisant la poignée à distance,
tirer le dossier du siège arrière
vers l'avant de l'intérieur du
véhicule.
7
Rétroviseurs extérieurs
Rétroviseur extérieur rabattable
Rétroviseur extérieur rabattable
électriquement
PRUDENCE
Ne pas toucher un rétroviseur
extérieur rabattable
électriquement pendant qu'il est
en mouvement :
Il est dangereux de toucher le
rétroviseur extérieur rabattable
électriquement lorsqu'il est en
mouvement.
Votre main pourrait être pincée et
blessée, ou le rétroviseur pourrait
être endommagé.
Utiliser l'interrupteur du
rétroviseur pour mettre le
rétroviseur sur la position route :
Il est dangereux de régler le
rétroviseur extérieur rabattable
électriquement à la position route
avec la main.
Le rétroviseur ne se verrouillera pas
en position et n'offrira pas une
bonne visibilité vers l'arrière.
Utiliser le rétroviseur extérieur
rabattable électriquement
uniquement lorsque le véhicule est
stationné en toute sécurité :
Il est dangereux d'actionner le
rétroviseur extérieur rabattable
électriquement pendant que le
véhicule est en mouvement.
Les rafales de vent sur le rétroviseur
feront baisser sa position, et vous
ne pourrez pas le remettre à la
position route, ce qui vous
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: ONP08
Replacement Service Bulletin Number:
MFR Communication Date: 2023-06-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SEATS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW
/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year. - Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




