NHTSA ID Number: 10238540
Manufacturer Communication Number: VOS1331
TSB/Document Date: 2023-07-05
Summary
This document describes the complete installation and configuration processes of ODIS Service Installation Version 2.0.2. Installation version 2.0.2 can be installed on applicable VAS diagnostic devices with Windows XP and Windows 7 operating systems. Installation options covered are:
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: VOS-13-31
Subject: ODIS Service Installation Phase 2 – Software Installation
& Configuration Instructions
Date: Dec. 18, 2013
Supersedes VOS-13-28 due to updated information.
Table of Contents
Page
Section
1.0
Introduction - Must Read!
2
1.1
New Installations - Overview
2
1.2
Reinstallations - Overview
2
Preparation
3
2.0
2.1
Prerequisites
3
2.2
Reinstallations – Uninstall ODIS Service
4
2.3
Note the CD/DVD Drive Letter
4
3.0
Installation
5
3.1
Application Software & License Installation
5
3.2
Post-Setup - Diagnostic Data Installation
12
4.0
Post-Setup Configuration
15
4.1
Administration - General
15
4.2
Administration - Support
18
4.3
Administration - Connections
19
4.4
Delete VAS-PC Desktop Icon (where applicable)
21
Post-Installation File Management & Backup
21
5.1
General Information
21
5.2
Backup Device ID Folder on Diagnostic Device
22
5.3
Backup USB Flash Drive
22
Online Updates
22
General Information
22
5.0
6.0
6.1
Page 1 of 22
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
1.0 – Introduction
This document describes the complete installation and configuration processes of ODIS Service
Installation Version 2.0.2. Installation version 2.0.2 can be installed on applicable VAS diagnostic
devices with Windows XP and Windows 7 operating systems. Installation options covered are:
• New installations – for devices where ODIS Service was not previously installed
• Reinstallations – for devices where ODIS Service was previously installed.
Specific information and instructions for each installation option are covered throughout this document.
Refer to Subsections 1.1, 1.2 and 1.3 below for more information on using these instructions.
In all cases, important prerequisites and preparations must be fulfilled prior to proceeding!
Notes:
• The following procedures must be performed by qualified personnel that are familiar with both
Windows XP and Windows 7 resources & navigation.
• Please read these instructions in their entirety before performing these procedures. If you do not
have previous experience loading software or do not understand these instructions, arrange
to have a qualified person install or reinstall the software etc.
• Perform all instruction steps in the exact order given. Heed all Prerequisites and Notes!
• Perform the installation in an area that is quiet, clean, and without distraction or interruption.
• Total installation time depends on device, operating system and CD/DVD drive condition. Allow at
least 45 minutes for laptops and longer for tablet devices and VAS 5051B.
• Check boxes are provided to note fulfilment of prerequisites and completion of instruction steps.
• Please discard any printed copies of this document after use. Revised versions may be
issued at any time. Always check ServiceNet for the latest version.
• If assistance with specific instruction steps is needed, contact VWGoA DTSS: 1-888-896-1298.
• For misplaced or damaged DVDs contact Arvato Corporation at: www.vw.techliterature.com.
1.1 - New Installations
Applies to VAS diagnostic devices where ODIS Service was not previously installed. In these cases, all
ODIS Service Installation Phases (1, 2 and 3) must be completed, in phase order, on all new devices prior
to using ODIS Service for vehicle diagnosis. All installation phase documents are posted on ServiceNet.
Look for the New Installations subsection titles and references throughout this document.
1.2 – Reinstallations
Applies to VAS diagnostic devices where ODIS Service was previously installed. Reinstallations may be
necessary whenever new “installation version” DVDs are issued, or to resolve application malfunctions on
an existing version.
Look for the Reinstallations subsection titles and references throughout this document.
1.3 – Windows XP and Windows 7
The instruction steps and screenshots provided here are based on a VAS diagnostic device with Windows
XP operating system. Installation on a VAS diagnostic device with Windows 7 operating system is similar.
However, installers must be aware of the equivalent Windows 7 resources and navigation where they may
differ.
Page 2 of 22
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.0 – Preparation
Information for New Installations, Reinstallations and applicable operating systems are specified in
separate Prerequisite subsections below. After fulfilling the Hardware and operating system
prerequisites, identify the installation prerequisites section that applies in your case.
2.1 – Prerequisites
2.1.1 – Hardware – All Devices and Installations
VAS 5051B – Windows XP ONLY: Must have minimum 1GB standard or upgraded RAM
.
VAS 5052A and VAS 6150 – Windows XP ONLY.
ODIS Service Version 2.0.2 DVD - Order No. 008.5002.02.21 on hand.
Diagnostic device with functioning CD/DVD drive and USB.
Diagnostic device plugged in to power adapter and booted to Windows desktop.
VAS 5052A & VAS 6160/A tablets: Connect a USB mouse and keyboard for easier input.
2.1.2 – New Installations
All instructions in the ODIS Service Installation Phase 1 - Preparation and License Request
Instructions document completed and all necessary outcomes achieved as follows:
Note the device model number: VAS 5051B console, VAS 5052A / VAS 6160/A tablet or
VAS 6150/X laptop. You must enter the model number during the installation routine!
Diagnostic device(s) assigned with unique Device ID.
Diagnostic device Hardware Key generated via eShop and saved/recorded in Master List
Wordpad document on USB flash drive.
License request submitted via eShop.
USB flash drive prepared with Device ID folders containing License and Certificate
subfolders.
License file received via email and copied to applicable Device ID / License subfolder
on USB flash drive.
When all prerequisites are met for New Installations, skip to Section 2.3, Page 4.
2.1.3 – Reinstallations
Note the device model number: VAS 5051B console, VAS 5052A / VAS 6160/A tablet or
VAS 6150/X laptop. You must enter the model number during the installation routine!
Note the assigned Device ID of the diagnostic device on which the installation is being made.
License file saved to Windows desktop or other location on device.
Optional: License file saved to original USB flash drive.
When all prerequisites are met for Reinstallations, proceed to Section 2.2, Page 4.
Continued …4/
Page 3 of 22
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.2 – Reinstallations – Uninstall ODIS Service
ODIS Service must always be uninstalled along with additional files prior to reinstallation. Use the
procedures specified below.
Tips:
• If you are unaware of, or have not recorded the Email Outbox Server configuration settings,
please note them now! > ODIS Service > Admin > Support > E-mail outbox server …record the
various settings on a separate piece of paper and retain for use during the post-reinstallation
configuration.
• If the license file was not saved in a folder on the Windows desktop, or if the original USB flash
drive containing the license file is not available, copy the installed license to the Windows desktop
prior to uninstallation:
1. From the Windows desktop, go to:
My Computer > Local Disc (C:) > Program Files > Offboard_ Diagnostic_Informa… > license
2. Right click the license file.
3. Select Copy, and then close all windows.
4. Paste the license on the Windows desktop (for retrieval during the installation routine).
Uninstall ODIS Service and Softing D-PDU API files:
1. From the Windows desktop, go to:
- Start > Programs > ODIS Service > ODIS Service Uninstallation Program
2.
3.
4.
5.
or
- Uninstall ODIS Service using the applicable Windows “Add or Remove Programs” utility.
When prompted, check the boxes to remove all licenses, MCD projects, diagnostic logs etc. Scroll
down in the prompt window as necessary.
Reboot the diagnostic device when prompted.
Go to: Start > Programs > Softing D-PDU API for VCIs > 1.X0.0XX > Uninstall (Be aware that more
than one Softing D-PDU API file may be listed under Programs).
Follow the uninstallation routine for ALL available D-PDU API 1.X0.0XX files.
6. Reboot the diagnostic device.
2.3 – Note the CD/DVD Drive Letter
The installation routine directs you navigate to a content folder on the installation DVD.
As CD/DVD drive letter assignments may not be consistent between devices, they may or may not match
the examples illustrated in these instructions. Please note YOUR drive letter as follows:
1. From the Windows desktop, click My Computer.
2. Note the letter assigned to the CD/DVD-RAM
Drive.
3. Close the My Computer Window.
Preparation & License Request Prerequisite steps complete
Proceed with Installation: Section 3.0 – Page 5.
Page 4 of 22
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3.0 – Installation
3.1 – Application Software & License Installation
•
New Installations: Begin by inserting the prepared USB flash drive with saved license file into an
available port on diagnostic device. Then continue from Step 1 below:
•
Reinstallations: Begin with Step 1 below:
1. Insert ODIS Service Version 2.0.2 DVD into CD/DVD drive.
2. From the Windows desktop, double-click My Computer
3. Open the CD/DVD drive directory.
4. Wait while the directory contents are read. Then Double-click OffboardDiagSetup-Service_2…:
5. Wait while the Install4j wizard prepares the installation:
6. Confirm English (US) is highlighted. Click OK.
7. Click Next:
Continued …6/
Page 5 of 22
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8. No action needed. Click Next:
9. If various Setup – Folder: C:/… prompts appear during Reinstallations, click Yes:
10. No action needed. Click Next:
Continued …7/
Page 6 of 22
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
11. If additional user interface languages are desired, select them from the available dropdown(s). Be
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VOS1331
Replacement Service Bulletin Number:
MFR Communication Date: 2013-12-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




