NHTSA ID Number: 10238524
Manufacturer Communication Number: VOS1310
TSB/Document Date: 2023-07-05
Summary
This document describes the complete installation and configuration processes of the latest installation version of ODIS Service.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: VOS-13-10
Subject: ODIS Service Installation Phase 2 - Software Installation
& Configuration Instructions
Date: May 21, 2013
Supersedes VOS-12-21 to specify use of Version 1.2.0 and additional information.
1.0 – Introduction
This document describes the complete installation and configuration processes of the latest installation
version of ODIS Service.
Use this document to install and configure ODIS Service on VAS diagnostic devices where ODIS Service
was not previously installed or to perform a complete reinstallation. Specific instructions for each of
these scenarios are included as applicable.
Important prerequisites and preparations must be noted and fulfilled prior to proceeding!
We recommend printing these instructions.
Notes:
The following procedures must be performed by the dealership ODIS Service Administrator or IT
Professional, or personnel qualified to perform software installations.
Perform all instruction steps in the exact order given. Heed all Prerequisites and Notes!
Perform the update in an area that is quiet, clean, and without distraction or interruption.
Total installation time depends on the type of device and CD/DVD drive condition. Allow at least 1
hour for laptops and 1.5+ hours for VAS 5051B, VAS 5052A and VAS 6160/-VPC.
If assistance with specific instruction steps is needed, contact VWGoA DTSS: 1-888-896-1298.
For misplaced or damaged DVDs please contact Arvato Corporation at: www.vw.techliterature.com.
We encourage installers to FIRST read this document in its entirety to become familiar
with the step-by-step processes and prepare accordingly.
1.1 - New Installations – ODIS Service Not Yet Installed
On devices where ODIS Service is not previously installed, completion of the installation and configuration
steps described here is prerequisite to performing ODIS Service Installation Phase 3 - Security
Certificate Request & Installation.
Installation Phases 1 through 3 must be completed on all new devices prior to using ODIS Service for
vehicle diagnosis.
1.2 – Reinstallations – Complete Reinstallation of ODIS Service
On devices where ODIS Service was previously installed, a complete reinstallation can be performed to
update an obsolete “installation” version or to resolve application malfunctions. In these cases, always use
the latest installation version of ODIS Service to perform complete reinstallations.
The device-specific license file that was originally installed must be available in order to perform a
complete reinstallation.
Page 1 of 25
ver1.4
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.0 – Preparation
2.1 – Preparation and License Prerequisites
2.1.1 – New Installations
All instructions in the ODIS Service Installation Phase 1 - Preparation and License Request
Instructions document must be completed and all necessary outcomes achieved:
Note the device platform: VAS 5051B console, VAS 5052A / VAS 6160/-VPC tablet or
VAS 6150/X laptop. You will be asked to enter the platform during the installation
routine!
Diagnostic device(s) assigned with unique Device ID.
Diagnostic device Hardware Key generated via eShop and saved/recorded in Master List
Wordpad document on USB flash drive.
License request submitted via eShop.
USB flash drive prepared with Device ID folders containing License and Certificate
subfolders.
License file received via email and copied to applicable Device ID / License subfolder
on USB flash drive.
2.1.2 – Reinstallations
Note the device platform: VAS 5051B console, VAS 5052A / VAS 6160/-VPC tablet or
VAS 6150/X laptop. You will be asked to enter the platform during the installation
routine!
Note the assigned Device ID of the diagnostic device on which the installation is being made.
ODIS Service uninstalled.
License file saved to Windows desktop or other location on device.
Optional: License file saved to original USB flash drive.
2.1.3 – Hardware
VAS 5051B: Must have minimum 1GB standard or upgraded RAM
, updated to Windows XP®
ODIS Service Update Version 1.2.0 – Order No. 006.5002.02.21 on hand.
Diagnostic device with functioning CD/DVD drive and USB.
Diagnostic device plugged in to power adapter and booted to Windows® desktop.
VAS 5052A & VAS 6160/V tablets: Connect a USB mouse and keyboard for easier input.
2.2 – Determine CD/DVD Drive Letter Assignment
The procedures that follow require manual entry of the CD/DVD drive letter. As drive letter assignments
may not be consistent between devices, please note and record the existing drive letter as follows:
1. From the Windows desktop, click My Computer:
Page 2 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2. Note the letter assigned to the CD/DVD drive: Note that the drive letter illustrated below is an
example only. The drive letter assigned on your device may be different!
3. Record the drive letter here: (
🙂
4. Close the My Computer Window.
You will be instructed to confirm and enter the drive letter recorded above during Post Setup.
Preparation & License Request Prerequisite steps complete
3.0 – Software & License Installation
New installations: Begin by inserting the prepared USB flash drive with saved license file(s) into
available port on diagnostic device. Then continue from Step 1 below:
Reinstallations: Begin with Step 1 below:
1. Insert ODIS Service Update Version 1.2.0 DVD into CD/DVD drive.
2. From the Windows desktop, double-click My Computer
3. Open the CD/DVD drive directory:
130429_828 ( 🙂
4. Wait while the directory contents are read. Then Double-click OffboardDiagSetup-Service_1…:
5. Confirm English (US) is highlighted. Click OK.
Page 3 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Click Next:
7. No action needed. Click Next:
8. If a Setup – Folder: C:/… prompt appears during a reinstallation, click Yes:
9. No action needed. Click Next:
Page 4 of 25
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10. If additional user interface languages are desired, select them from the dropdown(s). Note that
selecting additional languages significantly increases the installation time. Click Next:
Note:
Steps 11 and 12 configure the installed software to the diagnostic device platform and diagnostic
interface (connection) method. If diagnostic platform & interface (connection) methods are not
selected correctly, an “Invalid License File” error will appear during the Post-Setup Diagnostic
Data Installation process.
11. Select the applicable diagnostic device (target) platform from the dropdown menu, then click
Next:
Select the applicable device platform from the dropdown menu.
Note:
For VAS 6150A laptops, select Standard PC/Notebook from the
dropdown.
Continued …6/
Page 5 of 25
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
12. Confirm that the applicable diagnostic interface (connection method) appears: Click Next:
13. On diagnostic laptops and tablets only, a Bluetooth interface alert window appears. Click Next:
Continued …7/
Page 6 of 25
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
14. Ensure Copy license to the license folder is checked. Click Search…:
New installations: Navigate to directory for prepared USB flash drive, and then continue from
Step 15.
Reinstallations: Navigate to Windows desktop or other location containing the folder with the
saved license file, and then continue from Step 15:
15. Open the applicable Device ID folder or other folder containing the license file.
16. Open the License subfolder.
17. Select / highlight the license (.dat) file, then click Open (as illustrated).
Note:
DO NOT double click on the license file in its saved location!
Continued …8/
Page 7 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
18. Ensure the license file directory path is copied to the installation window. Note that the path
illustrated below is an example only! The actual path will be unique to your device. Click Next:
19. No action needed (DO NOT uncheck virtual keyboard). Click Next:
20. No action needed. Click Next:
Continued …9/
Page 8 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
21. Wait while several different phases of file installation take place:
22. If an existing Windows .dll file overwrite prompt appears during a reinstallation, click Yes for all.
23. If an SVG Viewer version prompt appears during a reinstallation, click No:
24. Click Finish:
25. Close the CD/DVD directory Window.
Software & License Installation steps complete
Proceed with Post-Setup Diagnostic Data Installation: Section 4.0 – Page 10.
Page 9 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.0 – Post-Setup Diagnostic Data Installation
The first time ODIS Service is started after installation via DVD, installation of the Post-Setup Data must
be performed. The post-setup process installs diagnostic data from the DVD. This process takes place in
two parts from two different target directories.
4.1 – Post Setup – Part 1
1. From the Windows desktop, locate and click the DiagStarter.bat…. Icon:
2. Select Offboard Diagnostic Information System Service:
3. Wait while the program starts:
Click Select local directory:
Page 10 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. Expand [+] the My Computer and 130429_0828 ( 🙂 directories and select / highlight the
postsetup folder as illustrated. Then click OK: Note that the CD/DVD drive letter illustrated below
is an example only!
5. Manually type in a backslash character ( / ) to the end of the URL target directory path. Then click
the blue Forward Arrow button:
Continued …12/
Page 11 of 25
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VOS1310
Replacement Service Bulletin Number:
MFR Communication Date: 2013-05-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




