NHTSA ID Number: 10237234
Manufacturer Communication Number: TKA-20R,TKB-20R,
TSB/Document Date: 2023-06-05
Summary
Takata Front Passenger Airbag Module / Inflator “Like for Like†Recall
Carline/MY Applicability for PASSENGER AIRBAG INFLATOR To
be used when claiming for INSPECTION ONLY
(Confirming the vehicle is equipped with a ZF / TRW
inflator)
Labor
Operation #
Labor
Time
2003-04MY Legacy / Outback & 2003-06MY Baja**
0.3
2005-09MY Legacy / Outback
0.3
2010-14MY Legacy & Outback
A182-038
2009-13MY Forester
0.3
0.3
2004-07MY Impreza
0.2
2008-11MY Impreza & 2008-14MY WRX / STI
0.3
Carline / MY Applicability for PASSENGER INFLATOR / MODULE
ASSEMBLY REPLACEMENT (includes Inspection)
Labor
Operation #
Labor
Time
2003-04MY Legacy / Outback & 2003-06MY Baja (M)
0.8
2005-09MY Legacy / Outback (I)
1.8
2010-14MY Legacy & Outback (M)
3.0
2009-13MY Forester (M)
A182-031
1.6
2004-05MY Impreza, WRX & STI (I)
0.8
2006-07MY Impreza, WRX & STI (M)
0.8
2008-11MY Impreza & 2008-14MY WRX / STI (M)
1.6
Fail Code
Claim
Type
TKA-20
TKB-20
TKC-20
RC
Fail Code
Claim
Type
TKA-20
TKB-20
TKC-20
RC
(M) = AIRBAG MODULE ASSEMBLY Replacement
(I) = INFLATOR ONLY Replacement
**NOTE: On 2003MY ONLY Legacy Outback and Baja models, the complete quote “7LF” 11-digit airbag module serial
number MUST be recorded during inspection and entered into the Miscellaneous Detail field as part of the campaign
completion/claim entry process. Refer to Appendix B starting on pg. 47 for more information.
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Page 42 of 48
OWNER NOTIFICATION LETTER
URGENT
IMPORTANT SAFETY RECALL
This notice applies to the VIN below
Subaru of America, Inc
PO Box 9103
Camden, NJ 08101-9877
844-373-6614
www.subaru.com
SAFETY RECALL NOTICE
This is an important Safety Recall.
The remedy will be performed at no charge to you.
Recall: XXX-20 NHTSA ID: XXX-XXX
January 2020
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists in certain
2003-2014 model year Legacy and Outback vehicles, 2003-2006 model year Baja vehicles, 2009-2013 model
year Forester vehicles, 2004-2011 model year Impreza vehicles, and 2004-2014 WRX (including STI) vehicles
equipped with a non-desiccated Takata-sourced passenger-side frontal air bag containing the propellant Phase
Stabilized Ammonium Nitrate.
Our records indicate that the vehicles included in this safety recall may have had an interim (“like-for-like”) repair
performed under a previous air bag recall, to reduce the risk of injury before final remedy parts were available.
You received this notice because our records indicate that you own one of these vehicles.
DESCRIPTION OF THE SAFETY DEFECT AND SAFETY HAZARD
Despite the previous recall repair for a “like-for-like” air bag inflator replacement, vehicles containing a Takatasourced passenger-side frontal air bag inflator remain susceptible to propellant degradation occurring after longterm exposure to high absolute humidity, temperature and temperature cycling. Over time, this could cause the
inflator within the air bag to explode when the passenger’s frontal air bag deploys in a crash.
If the air bag inflator explodes, sharp metal fragments could strike vehicle occupants, potentially
resulting in serious injury or death.
WHAT SUBARU WILL DO
Subaru will inspect your vehicle to confirm the type of replacement front passenger air bag inflator that was
installed in your vehicle under the previous recall. The inspection will be performed at no charge to you. If it is
confirmed that your vehicle contains a “like-for-like” air bag inflator, Subaru will replace it with a final remedy
non-Takata sourced inflator at no charge to you.
WHAT YOU SHOULD DO
You should immediately contact any authorized Subaru retailer (dealer) for an appointment to have this
repair performed for free. To minimize your inconvenience while the repair is being performed, please ask
your retailer for alternative transportation options.
HOW LONG WILL THE AIR BAG INFLATOR REPLACEMENT TAKE?
The time to replace the front passenger air bag inflator ranges from less than one hour to approximately three
hours, depending on the model. Your retailer can provide you with an estimate of the overall time needed for this
service visit, as it may be necessary to make your vehicle available for a longer period of time.
Continued...
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Page 43 of 48
OWNER INFORMATION
Government regulations require that recall notifications be sent to the last known owner of record. That
information is based primarily on state registration and title data. If you are a lessor of this vehicle, federal
regulations require you to forward this notice to your lessee within ten days.
If you have moved or sold your vehicle, please update this information online at www.subaru.com, select
‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the Quick Links menu.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a
Retailer.’
For additional information and the most Frequently Asked Questions, please go to:
http://www.subaru.com/vehicle-recalls/airbags.html, or call 1-844-373-6614.
Para información visite nuestro sitio web específico de Takata en español http://www.subaru.com/es/
vehicle-recalls/airbags.html, o llame al 1-844-373-6614.
If you need additional assistance, please contact us directly:
•
By e-mail: Go to www.subaru.com and select “Customer Support”
•
By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
•
By U.S. Postal mail: Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification email System, please go to:
https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of
charge.
You may also contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave.
SE, West Building, Washington, DC 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY:
1-800-424-9153) or go to http://www.safercar.gov if you believe the Subaru retailer has failed or is unable to
remedy your vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken
this action in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any
inconvenience this matter may cause and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
Notice to Lessors: Under Federal law the lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s)
within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the
applicable vehicle identification number (VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve
months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A
leased vehicle is a vehicle leased to another person for a term of at least four months.)
A subsidiary of Fuji Heavy Industries Ltd.
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Continued...
Page 44 of 48
SHIPPING DOCUMENTATION AND INSTRUCTIONS (Appendix A)
IMPORTANT NOTE: There are 2 different sets of instructions supplied in this section. The first
page outlines the procedure for INFLATOR returns while the following page provides instructions for
returning a COMPLETE MODULE assembly.
NOTE
INFLATOR RETURNS
These Return Instructions are for the Continental US dealerships (48 States).
NOTE: Locations outside of the Continental United States (Hawaii, Alaska, Puerto Rico, Virgin Islands INCLUDING Mexico and Canada
CANNOT follow below shipping instructions. Instead, dealerships in these locations MUST contact the following Takata/XPO USA
representative directly for shipping instructions: Miguel Prigadaa – Tel #: 210-250-5078 or Email:
[email protected]
4b. Shipping Instructions – Label each Box
1. Shipping Documents
a) Box Label
• Supplied with each Kit
• To be affixed to each box
a) If you continue receiving Inflator Kits with the original Fedex Documentation:
b) Over-pack Label
• To be supplied by
XPO.
• To be affixed to the
outside of each pallet
1.
c) Bill of Lading
2.
3.
• To be supplied by
XPO.
• Print 2 copies: 1 for
Dealer Records, 1 for
LTL Driver
Peel off the backing of the Fedex Ground PRP Shipping label and
affix to top of box to left of the Class 9 label.
•
Use the scribe line on the box as a guide
•
The FedEx Ground PRP Shipping label must not touch any
portion of the printing to the right of the scribe line.
Discard the remaining Documentation
Do Not contact FedEx
d) ERG Document
• To be supplied by
XPO.
• To be provide by the
Dealer to the LTL
Driver for each
shipment
2. Packing Instructions
5. Shipping Instructions – Prepare the Pallet
a) Confirm box is in acceptable condition. If a new box
is needed, follow the New Box instructions located
In Box 8 of this page.
a) Accumulate and palletize Kits
b) Arrange Kits on Pallet as pictured here
•
20 boxes per row/layer (5x4)
•
10 rows/layers per pallet (200 boxes)
c) Shrink-wrap Kits to Pallet
d) Affix Over-pack Label on (1) side of Pallet (Not on Top)
b) Place the un-deployed air bag inflator in
the “cradle” of the box insert.
6. Shipping Instructions – Schedule LTL Pickup
3. Closure Instructions
a) Close the top box flap, per box closure instructions located on front panel of
box.
a) Upon Accumulating 200 kits (1 Over-pack/Pallet) Minimum
•
Call XPO at 1-877-650-3476
•
If 200 Kits have not been accumulated in 30 days, please call XPO for
direction
c) Have the following Information Available
•
Dealer #
•
Quantity of Over-packs/Pallets
•
Quantity of Passenger Inflator Kits on each Pallet
•
Email Address where shipping Documentation can be received
7. Shipping Instructions – Ship
a) Give 1 Copy of BOL and 1 Copy of ERG to Driver
b) Retain 1 Copy of BOL for Dealership records and archive for 2 Years
8. Requesting a New Box / Shipping Labels
4a. Shipping Instructions - Label each Box
a) New Labels will begin shipping in each kit starting mid August, 2015
Subaru Inflator Kit will
contain this two-part
label:
Peel off ‘Ship To’
Label.
If a new box or replacement shipping labels are needed, please contact the
representative listed below by phone or email to request replacement
materials.
Primary Contact: Armando Gonzalez - Tel #: 210-250-5079
E-Mail: [email protected]
Affix Label to Box.
Do not cover up Class 9 Marking.
To help expedite your request, please be prepared to provide the following
information:
a) Serial number on the original box
b) What Type of shipping material needed
•
Replacement Box
•
Two Part Return Label
•
Bill of Lading
•
ERG Form
c) Dealer Shipping Information
•
Contact name
•
Dealer Address
•
Phone Number
Continued...
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Page 45 of 48
NOTE
FULL MODULE RETURNS
These Return Instructions are for the Continental US dealerships (48 States).
NOTE: Locations outside of the Continental United States (Hawaii, Alaska, Puerto Rico, Virgin Islands INCLUDING Mexico and Canada
CANNOT follow below shipping instructions. Instead, dealerships in these locations MUST contact the following Takata/XPO USA
representative directly for shipping instructions: Miguel Prigadaa – Tel #: 210-250-5078 or Email:
[email protected]
1. Shipping Documents
5. Shipping Instructions – Prepare the Pallet
a) Box Label
• Supplied with each Kit
• To be affixed to each box
a) Accumulate and palletize Kits
b) Arrange Kits on Pallet as pictured here
•
15 boxes per row/layer (5x3)
•
5 rows/layers per pallet (75 boxes)
c) Shrink-wrap Kits to Pallet
d) Affix Over-pack Label on (1) side of Pallet (Not on Top)
b) Over-pack Label
• To be supplied by
XPO.
• To be affixed to the
outside of each pallet
c) Bill of Lading
• To be supplied by
XPO.
• Print 2 copies: 1 for
Dealer Records, 1 for
LTL Driver
6. Shipping Instructions – Schedule LTL Pickup
a) Upon Accumulating 75 kits (1 Over-pack/Pallet) Minimum
•
Call XPO at 1-877-650-3476
•
If 75 Kits have not been accumulated in 30 days, please call XPO for
direction
c) Have the following Information Available
•
Dealer #
•
Quantity of Over-packs/Pallets
•
Quantity of Passenger Inflator Kits on each Pallet
•
Email Address where shipping Documentation can be received
d) ERG Document
• To be supplied by
XPO.
• To be provide by the
Dealer to the LTL
Driver for each
shipment
2. Packing Instructions
7. Shipping Instructions – Ship
a) Confirm box is in acceptable condition. If a new box
is needed, follow the New Box instructions located
In Box 8 of this page.
a) Give 1 Copy of BOL and 1 Copy of ERG to Driver
b) Retain 1 Copy of BOL for Dealership records and archive for 2 Years
b) Place the un-deployed air bag module in
the “cradle” of the box insert.
8. Requesting a New Box / Shipping Labels
If a new box or replacement shipping labels are needed, please contact the
representative listed below by phone or email to request replacement
materials.
Primary Contact: Armando Gonzalez - Tel #: 210-250-5079
3. Closure Instructions
E-Mail: [email protected]
a) Close the top box flap, per box closure instructions located on front panel of
box.
To help expedite your request, please be prepared to provide the following
information:
a) Serial number on the original box
b) What Type of shipping material needed
•
Replacement Box
•
Two Part Return Label
•
Bill of Lading
•
ERG Form
c) Dealer Shipping Information
•
Contact name
•
Dealer Address
•
Phone Number
4. Shipping Instructions - Label each Box
a) New Labels will begin shipping in each kit starting mid August, 2015
Subaru Module Kit will
contain this two-part
label:
Peel off ‘Ship To’
Label.
Affix Label to Box.
Do not cover up Class 9 Marking.
Continued...
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Page 46 of 48
APPENDIX B
NOTE: This information is applicable to 2003MY Legacy, Outback, and Baja models ONLY.
Subaru of America, Inc. (Subaru) has been notified by SUBARU CORPORATION (SBR) that some
early production 2003 MY Legacy, Outback, and Baja vehicles may have been incorrectly included in
the list of vehicles requiring inflator replacement as part of the on-going Takata recalls listed above.
•
These early production 2003 MY vehicles (77,000) were equipped with inflators which do not
contain ammonium nitrate.
•
These inflators which do not contain ammonium nitrate do not require replacement as part of any
Subaru airbag recall.
Description of the Remedy
The inspection involves lowering of the glovebox to provide enough access to visually inspect the
label on the airbag module. Labels containing “7LF” identify inflators WITHOUT ammonium nitrate
and those with “7LG” identify inflators WITH ammonium nitrate as shown in the photos below. If
the vehicle in question is identified as having an airbag inflator without ammonium nitrate installed,
STOP and note the 11-digit serial number ONLY as no further action is required other than
refitting the glove box. Only vehicles with airbag inflators containing ammonium nitrate are
affected by this campaign.
See the Claim Reimbursement and Entry Procedures at the end of this announcement for instructions
on how to submit a claim for “Inspection Only” when an inflator without ammonium nitrate is
identified.
Inflator WITHOUT Ammonium Nitrate- Serial Number Label Location (2003 Legacy, Outback
and Baja models only): Record this 11-digit number for claims purposes.
•
Additional 2003 Leg / Obk / Baja Module / Inflator Inspection info to add:
If the serial number label is missing, illegible or if there is any uncertainty if the airbag module is
affected by this Recall Campaign, follow the Counterfeit / Non-Genuine airbag inspection process
provided above. Always take photos of the module showing the entire inflator along with an
additional photo showing the area where the label should be as seen in the photos below. Next,
submit a Quality Monitoring Report (QMR) requesting SOA review. A member of the Claims Team
will contact the Retailer following review of the QMR submission with information on how to
proceed.
Continued...
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Page 47 of 48
Inflator WITH Ammonium Nitrate- Serial Number Label Location
Label Detail
Inflator WITHOUT
Ammonium Nitrate
“7LF”
NOT AFFECTED
Inflator WITH
Ammonium Nitrate
“7LG”
AFFECTED
Labor Description
2003MY LEGACY / OUTBACK / BAJA PASSENGER FRONT
AIRBAG INFLATOR - INSPECTION ONLY
(Vehicles equipped with inflator WITHOUT ammonium nitrate.)
Labor
Operation #
A182-038
Labor
Time
Fail
Code
Claim
Type
0.3
TKA-20
TKB-20
TKC-20
RC
(which ever is applicable)
IMPORTANT NOTE: The complete 11-digit airbag module Serial Number MUST be recorded
during inspection and entered into the Miscellaneous Detail field as part of the campaign completion /
claim entry process.
If you have any questions, please contact the Claims Helpline at 1-866-782-2782.
Bulletin Number: TKA-20R / TKB-20R / TKC-20R; Revised: 05/02/23
Page 48 of 48
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TKA-20R,TKB-20R,
Replacement Service Bulletin Number:
MFR Communication Date: 2023-05-02
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS：The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER：Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS：Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE：Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth, Peterbilt, Volvo, Mack, International, and other commercial truck brands, plus Cummins, Caterpillar, Detroit, Paccar, and Navistar diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE：This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner, Kenworth, Peterbilt, Volvo, International, Detroit, Cummins, Paccar, Allison, Eaton, Bendix, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed
- 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins, Paccar, Caterpillar, Detroit, and Freightliner—making it a versatile semi truck scanner for managing any diverse fleet.
- 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.