NTB22-021A

260.

Follow the on-screen instructions to perform Erase All DTCs:
a. Turn the ignition OFF.
b. Turn the ignition ON.
c. Wait for Erase All DTCs to complete.

261.

Select Next.

Turn ignition ON > OFF > ON

Figure 259

262. When the entire reprogramming process is complete, the screen in Figure 260 on
page 129 will display.

128/152

NTB22-021A

263.

Verify the before and after part numbers are different.

264.

Print a copy of this screen (Figure 260) and attach it to the repair order.

265.

Select Confirm.

xxxxx-xxxxx
xxxxx-xxxxx
xxxxx
xxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxx

Figure 260
HINT: If you cannot print the above screen:
a. Select Screen Capture.
b. Name the file.
c. Save the file in My Documents.
o A copy of the screen is now saved in the CONSULT PC. It can be retrieved
and printed at a later time.

129/152

NTB22-021A

TCM Recovery:
Do not disconnect the VI or shut down C-III plus if reprogramming does not
complete.
If reprogramming does not complete and the “!?” icon displays as shown in
Figure 261:


Check battery voltage
(12.0–15.5 V).



Ignition is ON, engine OFF.



External Bluetooth® devices are OFF.



All electrical loads are OFF.



Select retry and follow the on screen
instructions.



“Retry” may not go through on first
attempt and can be selected more than
once.

xxxxxx
xxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxx

Figure 261

If reprogramming does not complete and the “X” icon displays as shown in
Figure 262:


Check battery voltage
(12.0–15.5 V).



CONSULT A/C adapter is plugged in.



Ignition is ON, engine OFF.



Transmission is in Park.



All C-III plus / VI cables are securely
connected.



All C-III plus updates are installed.



Select Home, and restart the
reprogram procedure from the
beginning.

xxxxxx
xxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxx

Figure 262

130/152

NTB22-021A

CONTROL VALVE REPLACEMENT

266.

Navigate C-III plus to the screen shown in Figure 263.


Diagnosis (All Systems) > TRANSMISSION > Work support

267.

Select CONTROL VALVE REPLACEMENT.

268.

Select Start.

Figure 263

131/152

NTB22-021A

269.

Follow the on-screen instructions; maintain the following conditions:
a. Turn the ignition ON, with the engine OFF.
b. Press the brake pedal.
c. Press the accelerator pedal between ¼ and ½.
d. Put the shift selector in R.

270.

Select Start.

Figure 264
271.

Release the accelerator and brake (shift selector remains in R).

272.

Turn the ignition OFF, and then wait 10 seconds.

Figure 265
132/152

NTB22-021A

273.

Turn the ignition ON, and then wait 10 seconds.

Figure 266

274.

Turn the ignition OFF, and then wait 10 seconds.

Figure 267

133/152

NTB22-021A

275.

Turn the ignition ON.

276.

Move shift selector to P.

Figure 268

277.

When “Completed” is displayed, select End.

Figure 269

134/152

NTB22-021A

278.

Does the pop-up notification in Figure 270 display?
YES: TCM Programming is not correct for the installed control valve. Select OK, and
then return to step 206 on page 111.
NO: Proceed to step 279 on page 136.

Pop-up
notification

Figure 270

135/152

NTB22-021A

ERASE LEARNING VALUE

279.

Navigate C-III plus to the screen shown in Figure 271.


Diagnosis (All Systems) > TRANSMISSION > Work support

280.

Select ERASE LEARNING VALUE.

281.

Select Start.

Figure 271

136/152

NTB22-021A

282.

Follow the on-screen instructions while maintaining the following conditions:
a. Parking brake set.
b. Ignition ON, with the engine OFF.
c. Put the shift selector in R.
d. Fully depress the accelerator pedal.

283.

Select Start.

Figure 272
284.

When “COMPLETED” is displayed, select End.

Figure 273
137/152

NTB22-021A

CONFORM CVTF DETERIORTN

285.

Navigate C-III plus to the screen shown in Figure 274.


Diagnosis (All Systems) > TRANSMISSION > Work support

286.

Select CONFORM CVTF DETERIORTN.

287.

Select Start.

Figure 274
288.

Select Start.

Figure 275
138/152

NTB22-021A

289.

Select Clear.

Figure 276

290.

Select Yes.

Figure 277

139/152

NTB22-021A

291.

When CVFT DETERIORATION DATE changes to “0”, select End.

0

Figure 278

292.

Start the engine.

293.

Set the parking brake.

294.

Turn OFF the A/C.

295.

Bring the engine to normal operating temperature range.

296.

Confirm the CVT fluid temperature is over 122°F (50°C).

140/152

NTB22-021A

AUXILIARY GEARBOX CLUTCH POINT LEARNING

297.

Navigate C-III plus to the screen shown in Figure 279.


Diagnosis (All Systems) > TRANSMISSION > Work support

298.

Select Auxiliary gearbox clutch point learning.

299.

Select Start.

Figure 279
300.

Follow the on-screen instructions in Figure 280, and then select Start.

Figure 280
141/152

NTB22-021A

301.

With the brake pedal still applied, move the CVT selector lever into the D position.


Figure 281 will be displayed after shifting into D position.

HINT: The Current status will show “EXECUTING”, but Auxiliary gearbox clutch
point learning will not begin until the vehicle is shifted into the Drive (D) position.

Figure 281
302.

Continue to press the brake pedal until the Current status shows “Completed” as
shown in Figure 283 on page 143.
HINT: This may take several minutes to complete.

Figure 282
142/152

NTB22-021A

303.

When “Completed” is displayed, select End.

Figure 283

304.

Shift the vehicle into Park, turn the ignition OFF and release the brake pedal.

305.

Perform Auxiliary Gearbox Clutch Point Learning (steps 297 - 304 on
pages 141 - 143) one additional time (a total of two times).

Erase DTCs
306.

Use C-III plus to erase any transmission DTCs that may have stored.

307.

Turn OFF C-III plus.

308.

Disconnect the VI from the vehicle.

309.

Verify the CVT operates normally and no abnormal noises are heard during a test
drive.

Procedure complete.

143/152

NTB22-021A

PARTS INFORMATION

Belt and Pulley with Control Valve Repair (Sub-Assembly Repair)
DESCRIPTION
KIT-CONTROL VALVE
KIT-PULLEY
KIT-OIL PUMP
Loctite 5460 Sealant (1) (2)
Nissan NS-3 CVT Fluid (1) (2)
Additional Engagement Tool O-Rings (5)
Lens Swab packet (6)
Refer to the footnotes on page 146.

PART #

QUANTITY

3170E-50X5A
31214-50X9D
31340-50X9E
999MP-LT5460P
999MP-CV0NS3
NI-52273-1
J-51963

1
1
1
(3) (4)
As needed
As needed
(7)

****Single use parts that are not included in the above kit****
****Refer to the library in the EPC for the single use parts lists****
DESCRIPTION

PART # PREFIX

QUANTITY

WASHER – SPRING (manual plate)

08915

1

NUT - HEX (manual plate)

08911

1

144/152

NTB22-021A

PARTS INFORMATION (continued)

Control Valve only Repair
DESCRIPTION

PART #

QUANTITY

KIT-CONTROL VALVE

3170E-50X5A

1

Nissan NS-3 CVT Fluid (1) (2)

999MP-CV0NS3 As needed

Additional Engagement Tool O-Rings (5)
Lens Swab packet (6)
Refer to the footnotes on page 146.

NI-52273-1

As needed

J-51963

(7)

****Single use parts that are not included in the above kit****
DESCRIPTION

PART # PREFIX

QUANTITY

WASHER – SPRING (manual plate)

08915

1

NUT - HEX (manual plate)

08911

1