03-087: Model Year 2021-2024 367, 389, 567, and 579
Optional Fuel Filter Restriction Display Incorrect
2/27/2023

 Edit

 Clone

03-087

Subject
Model Year 2021-2024 367, 389, 567, and 579 Optional Fuel Filter Restriction Display Incorrect

Whats New Abstract
Certain Model Year 2021-2024 chassis with PACCAR MX engines and optional fuel filter restriction
virtual gauge may display incorrect restriction levels. The virtual gauge will be temporarily disabled until a
revised sensor strategy is developed.

Condition
The optional fuel restriction display may show 100% restriction when the filter is not restricted, and no
other fuel system pressure faults are present.

Chassis Affected
Certain Model Year 2021-2024 367, 389, 567, and 579 chassis built from 05/20/2020 through 12/02/2022
equipped with PACCAR MX engines, fuel restriction sensor, and virtual gauge enabled within the Digital
Display.

Action
Fix-As-Requested
If a customer comes into your dealership and demonstrates the condition above:
1. Follow the instructions below to check for fuel pressure-related faults.
If active fuel pressure codes are present, troubleshoot and repair as a separate event. Once active codes
have been resolved, continue below.

NOTE
This bulletin does not cover troubleshooting and
repair of fuel pressure related faults. File a separate
claim for troubleshooting or repair tasks if necessary.

2. Program software to the chassis to temporarily remove the fuel restriction gauge display.

CAUT I O N
Fuel filter service intervals MUST be followed to
prevent fuel system faults. Use only good quality fuel
and follow all recommended service intervals listed in
operator and service manuals.

Warranty
Through Standard Warranty or any applicable active Extended Warranty, Peterbilt will pay for labor:
0.3 hours to check for active fuel-related fault codes and reprogram Digital Display. Use Quick Claim
code 03087.
Troubleshooting and repair of active fuel pressure faults are not covered by this bulletin. File a separate
claim under applicable warranty for troubleshooting and repair of fuel pressure fault codes.
File an additional claim for extraordinary circumstances. A quick claim for standard labor must be filed

first.
File the claim within 14 days in accordance with Warranty Policy.

PRWS CLAIM CODING
Campaign 03087
Code:

Campaign
Type

Field Repair

​Claim
Engine Repair Type
Category:

Fix-as-Requested

Customer 151
Concern
Code

Causal Code

93

Corrective 22
Action
Code

Responsibility Camp
Code:

Failure
Location

Causal Part

Supplier
Code

003001076

​
​2246913

N/A

SRT Code

B22-015
0.3 hrs
Check for fuelrelated fault codes
and reprogram
Digital Display

Parts
​Software only – No Parts Required.

Background
The fuel filter restriction sensor software strategy on certain Model Year 2021-2024 367, 389, 567, and 579
chassis with PACCAR MX engines is incorrect. This causes the fuel restriction virtual gauge to show high
restriction even when there is no filter restriction present.
Reprogramming the Digital Display will temporarily remove the fuel restriction virtual gauge. A future

campaign will be available to re-enable the filter restriction virtual gauge.

Procedure
Please follow your dealership's safety procedures and precautions to ensure the vehicle can be
safely repaired and maintained.
1. Connect DAVIE4
2. Check for fuel system related faults including:
Any fuel pressure low fault
Injector misfire faults
3. If no fuel system faults are found, program the Digital Display using the steps below and release the
vehicle.
4. If active fuel system pressure faults are found, troubleshoot and repair the fuel system using

applicable service manuals.

NOTE
Fuel system troubleshooting and repair labor and
parts are not covered by this bulletin. Refer to the
applicable service manuals and any applicable
warranty documentation.

5. Once troubleshooting and repair have been completed, program the Digital Display using the steps
below and release the vehicle.
Program the Digital Display
1. Download and program new software for the Digital Display using DAVIE4.
Ensure DAVIE4 is up to date
Connect DAVIE4 using the 9-pin connection
Download new software for the Digital Display
Program the Digital Display following prompts in DAVIE4
2. Verify that the Fuel Restriction gauge is no longer displayed.
3. Use DAVIE4 to clear any DTCs.

CAUT I O N
Operators should be advised that without the fuel
restriction gauge enabled, the gauge will not be
available on the Digital Display.
Fuel filter service intervals MUST be followed to
prevent fuel system faults. Use only good quality fuel
and follow all recommended service intervals listed in
operator and service manuals.

Select the date.

This notice applies to your vehicle. Your VIN(s) can be found on the bottom or back of this page.
Subject:

03-087: Model Year 2021-2024 367, 389, 567, and 579 Optional Fuel Filter Restriction Display Incorrect

Dear Peterbilt Customer,
Your vehicle (listed within this letter) is equipped with the Optional Fuel Restriction Gauge. Currently, the fuel restriction
display may show 100% restriction when the filter is not restricted, and no other fuel system pressure faults are present.
•

The Fuel Restriction Gauge should be temporarily disabled until a repair is available. Disabling the virtual gauge will
avoid unnecessary fuel filter service based on the fuel restriction display only.
The work will take approximately 1 hour, depending on repair scope, vehicle configuration, and dealer scheduling.
There will be no charge to you if completed by 03/01/2024.

•

If you choose to do so, you can operate normally without disabling the gauge. No reprogramming or service is
necessary if you choose this option. All other fault codes and warning lights will operate normally. The service
intervals listed in the Operator and Service manuals for fuel filters MUST be followed. Fuel system faults can occur
due to clogged or contaminated fuel filters that would normally be indicated by the fuel restriction gauge.
Be aware that any fuel pressure related fault codes could indicate clogged fuel filters and may require
troubleshooting or repair not covered by this bulletin.

Customers will receive another letter when a software update is available to allow the fuel restriction gauge to operate
properly.
What is the problem?

The fuel filter restriction gauge may display incorrect information.

What will your dealer do?

Dealers can temporarily disable the fuel filter restriction gauge (if desired).

What should you do?

Contact your Peterbilt dealer to schedule an appointment for repair.

Peterbilt Motors Company has initiated this work to remedy the issue at no charge to you. Please contact your Peterbilt
dealer to schedule an appointment for these services. To find your Peterbilt dealer, please visit the Dealer Locator at
www.Peterbilt.com or scan the QR code. When contacting your Peterbilt dealer, reference 03-087: Model Year 2021-2024
367, 389, 567, and 579 Optional Fuel Filter Restriction Display Incorrect.
If you require further information about this repair, or experience any difficulty in making arrangements for this repair, please
contact: Peterbilt Motors Company, 1700 Woodbrook St, Denton, TX 76205, Attn: Customer Experience Department.
We apologize for any inconvenience this preventive procedure may cause and thank you for your participation in helping
Peterbilt provide the highest levels of customer satisfaction and service expertise. We value your business and appreciate
your ongoing loyalty to Peterbilt and its dealer network. Industry-leading quality, performance and reliability are hallmarks of
Peterbilt products, and we thank you for making Peterbilt your truck of choice.
Sincerely,

Michelle Ponsonby
Director of Customer Experience
Peterbilt Motors Company