Installation and Conversion Instructions

Macan (95B)
9/22

ENU

2601

2

Sports Exhaust System - Silver (0P8) / Black (0P9)

Vehicle Type:

Macan / Macan T

Model Year:

As of 2022

Engine Type:

DMT (basic engine) = R4 / 2.0 liter / 195 kW (265 hp)
•

Restrictions:

DMTB with performance class D3Q = 195 kW (265 hp)

ONLY approved for vehicles produced from 49/2021 (week/year)!
ONLY Macan T: Sports exhaust system – tailpipe in silver chrome-plated look– (0P8) is not approved!

Information:

Retrofitting
Information

Figure 1
Notes:

In the sports exhaust system, the signal for activating the flaps in the rear silencers comes from the
respective current map in the DME control unit (DME SG). This depends on the driving status and the
accelerator pedal position among other things.

Tequipment

Aug 2, 2022
Page 1 of 30

2

Macan (95B)
2601

ENU

9/22

Installation and Conversion Instructions

The sports exhaust system can be activated and deactivated separately using the new "Twin tailpipe"
button (center console control panel  Figure 1) or the standard "Sport" button. The sports exhaust
system is active in "Sport" and "Sport Plus" modes on vehicles with Sport Chrono Package.
The engine power and exhaust behavior of the vehicle are not affected.
Under the individual equipment "0P8 - Sport exhaust system incl. sport tailpipes silver" or "0P9 - Sport
exhaust system incl. sport tailpipes black", the sport exhaust system is also available ex works for new
Macan Basic vehicles. Only the “0P9 – Sports exhaust system including sports tailpipes in black” can be
ordered straight from the factory for the Macan T.

Parts Info:

95B.044.2201
95B.044.220.A

1

 Sports exhaust system – Tailpipe in Silver chrome-plated look,
set
 Sports exhaust system – Tailpipe in Black chrome-plated look,
set

NOT approved for Macan T!

Parts List:

Figure 2

Aug 2, 2022
Page 2 of 30

Tequipment

Installation and Conversion Instructions

Macan (95B)
9/22

ENU

2601

2

Parts included for exhaust system ( Figure 2):
958.111.220.10

2x

Clamping sleeve, ∅ 65 x 88  Figure 2 -1-

95B.253.601.CY

1x

Rear silencer assembly – left  Figure 2 -2-

95B.253.600.BY

1x

Rear silencer assembly – right  Figure 2 -3-

N .106.620.01

4x

Hexagon-head bolt, M8 x 40  Figure 2 -4-

95B.253.681.R2

1x

Sports tailpipe, black chrome-plated, outer left  Figure 2 -5-

95B.253.681.Q2

1x

Sports tailpipe, black chrome-plated, inner left  Figure 2 -6-

999.073.594.01

4x

Countersunk screw, M6 x 12 PA  Figure 2 -7-

95B.253.682.Q2

1x

Sports tailpipe, black chrome-plated, inner right  Figure 2 -8-

95B.253.682.R2

1x

Sports tailpipe, black chrome-plated, outer right  Figure 2 -9-

95B.253.681.P2

1x

Sports tailpipe, silver chrome-plated, outer left (not shown)

95B.253.681.N2

1x

Sports tailpipe, silver chrome-plated, inner left (not shown)

95B.253.682.N2

1x

Sports tailpipe, silver chrome-plated, inner right (not shown)

95B.253.682.P2

1x

Sports tailpipe, silver chrome-plated, outer right (not shown)

2

ONLY contained in respective set!

Figure 3

Tequipment

Aug 2, 2022
Page 3 of 30

2

Macan (95B)
2601

ENU

Installation and Conversion Instructions

9/22

Parts included for electrical system ( Figure 3):
95B.907.159.M

1x

Engine noise control unit  Figure 3 -1-

999.076.081.40

2x

Hexagon collar nut, T5/16 x 11.2 (plastic)  Figure 3 -2-

4H0.907.601.E

1x

Engine noise pulse sender  Figure 3 -3-

N .908.877.03

1x

M6 hexagon collar nut, self-locking  Figure 3 -4-

95B.044.200.25

1x

95B.044.213.B

1x

N .912.098.01

1x

Wire harness for engine noise control unit/pulse sender including
adapter cable (secured)  Figure 3 -5Wire harness for connection point/exhaust flap – left-hand drive
vehicle  Figure 3 -6Flat screw with internal serration, 7/16  Figure 3 -7-

999.513.052.40

25 x

Tie-wrap, 4.8 x 188 (not shown)

Information
ONLY in the event of repairs/replacement:
Items WITHOUT a part number in the parts list can be found/ordered from the Porsche Electronic Parts
Catalog = PET.
Check model year and vehicle equipment (I-no.) in the standard catalog!

Materials:

Tools:

000.043.172.00

1x

Sealing cord

———

1x

Commercially available rust solvent, e.g. WD40

———

1x

Wrapping tape (commercially available)

———

1x

Auxiliary line (Tekalan or Teflon hose) approx. 1,500 mm/ 4.92 ft
long

VAS 6931 Transmission and gearbox jack
VAG 1783 - Torque wrench or equivalent
VAS 6935 Pole terminal puller
9873 - Bonnet stay
3438 - Hooks
9900 - PIWIS Tester 3
Three-mandrel pliers for hoses and sleeves (commercially available)
Restraining strap for securing loads

Assembly:

Aug 2, 2022
Page 4 of 30

1

Preliminary work
1.1

Drive the vehicle onto a lifting platform.  Workshop Manual '4X00IN Lift vehicle'

1.2

Connect a battery charger.  Workshop Manual '2X00IN Battery trickle charge'

Tequipment

Installation and Conversion Instructions

Macan (95B)
9/22

ENU

2601

2

CAUTION
Hot components
•

Risk of burns



Let hot components cool down.



Wear personal protective gear.
1.3

Work in the exhaust system area
1.3.1

Remove standard tailpipes
( Figure 5).  Workshop Manual
'263519 Removing and installing
tailpipe trim'

Figure 5
1.3.2

Unlock and disconnect the
electrical plug connection for
the exhaust flap actuator on the
left-hand rear silencer ( Figure
6).  Workshop Manual '265119
Removing and installing exhaust
flap actuator'
1
2

– Electric plug connection
– Rear muffler, left

Figure 6

Tequipment

Aug 2, 2022
Page 5 of 30

2

Macan (95B)
2601

ENU

Installation and Conversion Instructions

9/22
1.3.3

Secure the exhaust pipe with a
suitable securing device (e.g.
strap, load securing device or hook)
to prevent it from folding down
( Figure 7).
1
2

1.3.4

– Exhaust pipe
– Hooks

Support the rear silencer with
gearbox and unit jacks and
secure with a tensioning strap.
Figure 7
Information
The help of another person is required for this step.

1.3.5

Separate the rear silencer at
the middle marking points on
the exhaust pipe ( Figure 8).
 Workshop Manual '263355
Replacing rear silencer'

Figure 8
CAUTION
Heavy components

Aug 2, 2022
Page 6 of 30

•

Risk of pinching



Wear personal protective gear.



Get someone to help if necessary.

Tequipment

Installation and Conversion Instructions
1.3.6

Macan (95B)
9/22

ENU

2601

2

Unscrew M8 x 40 hexagon nuts on
the rear silencer holder ( Figure
9).
1
2

– Hexagon-head bolts, M8 x
40
– Rear muffler, left

Remove rear silencer.

Figure 9
1.3.7

Detach heat shield in the rear
silencer area – at the right
( Figure 10) and bend it down
slightly.
1
2
3
4

1.3.8

1.4

–
–
–
–

Cap nut
Heat shield
Dummy plug
Filler

Remove dummy plug on underbody
and de-burr using a spatula (
Figure 10 -Magnifier-).

Expose the plenum panel area
1.4.1

Move front lid to service position.
 Workshop Manual '552213
Securing front lid (service position)'

1.4.2

Remove wiper arms.  Workshop
Manual '922519 Removing and installing wiper arm'

1.4.3

Remove cowl panel cover.  Workshop Manual '508719 Removing and installing
cowl panel cover'

Tequipment

Figure 10

Aug 2, 2022
Page 7 of 30

2

Macan (95B)
2601

ENU

Installation and Conversion Instructions

9/22
1.4.4

Remove cover on fuse box (E-box)
in cowl panel ( Figure 11).
 Workshop Manual '978409
Loosening and securing fuse box'
1
2

1.4.5
1.5

– Fuse box (E-box) in cowl
panel
– Foam pads on bulkhead

Remove foam pads on bulkhead (
Figure 11 -2-).

Expose A-pillar area (on driver's side)
1.5.1

Figure 11

Remove dashboard trim panel
( Figure 12 -1-).  Workshop
Manual '701619 Remove and install
dashboard trim panel'
1
2
3

– Dashboard trim panel
– Air vent (instrument
cluster)
– Trim panel under
dashboard

Figure 12
1.5.2

Remove air vent (on instrument
cluster  Figure 12 -2-/  Figure
13 -1-) and air vent unit (underneath
the PCM  Figure 13 -3-).
1
2
3
4

1.5.3

Aug 2, 2022
Page 8 of 30

– Air vent (instrument
cluster)