NHTSA ID Number: 10218970
Manufacturer Communication Number: NTB22-063B
TSB/Document Date: 2022-08-31
Summary
VOLUNTARY SERVICE CAMPAIGN 2021 ROGUE; PASSENGER SIDE SEAT BELT RETRACTOR AND AIRBAG MODULE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Figure 99
28/57
NTB22-063B
68.
Disconnect the wire harness connectors, disengage the wire harness fixing clip, and
then remove the A/C switch assembly.
Wire harness fixing clip
Wire harness connectors
Figure 100
69.
Remove the two (2) Intelligent Key unit mounting screws, disconnect the wire harness
connector, and then remove the Intelligent Key unit.
Intelligent Key unit mounting
screws (2)
Wire harness connector
Figure 102
Figure 101
70.
Remove the four (4) RH side ventilator grille assembly mounting screws.
RH side ventilator grille assembly
mounting screws (4)
Figure 103
29/57
NTB22-063B
71.
Disengage the seven (7) RH side ventilator grille assembly metal clips, as indicated
by the arrows shown in Figure 104, and then remove the RH side ventilator grille
assembly.
: Metal clip
Figure 104
72.
Apply protective tape to the RH side of the instrument panel assembly, as shown in
Figure 105.
Protective tape
Figure 105
73.
Disengage the one (1) RH front pillar garnish (RH A-pillar trim) metal clip and the one
(1) anchor clip, as indicated by the arrows in Figure 106.
RH Front pillar garnish
(RH A-pillar trim)
: Metal clip
: Anchor clip
Figure 106
Figure 107
30/57
NTB22-063B
74.
Cut the anchor clip, as shown in Figure 108 and Figure 109.
A-pillar trim
Anchor clip
Figure 108
75.
Figure 109
Disengage the RH A-pillar trim fixing portion, as indicated by the arrow in Figure 110,
and then remove the RH A-pillar trim.
If equipped, disconnect the tweeter wire harness connector (Figure 111).
Tweeter wire harness connector
Figure 110
76.
Figure 111
Remove the anchor clip from the RH A-pillar and replace with a new one.
Anchor clip
Figure 112
31/57
NTB22-063B
77.
Using a remover tool, disengage the three (3) RH speaker grille fixing pawls, as
indicated by the arrow in Figure 114, and then remove the RH speaker grille.
: Pawl
Speaker grille
Figure 113
78.
Figure 114
Remove the three (3) RH speaker mounting bolts, disconnect the speaker wire
harness connector, and then remove the RH speaker from the instrument panel.
Speaker mounting bolts (3)
Speaker
Figure 115
79.
Perform steps 72 - 78 for the LH side.
80.
Apply protective tape to the instrument panel in between the optical sensor and the
sunload sensor, as shown in Figure 116.
Optical sensor
Sunload sensor
Protective tape
Figure 116
32/57
NTB22-063B
81.
Using a remover tool, disengage the optical sensor and sunload sensor fixing pawls
(Figure 117), and then pull the sensors from the instrument panel (Figure 118).
Optical sensor
Figure 117
Sunload sensor
Figure 118
82.
Disconnect the wire harness connectors from the optical sensor and the sunload
sensor, and then remove both sensors.
83.
Disengage the five (5) instrument panel garnish (trim) fixing pawls and eleven (11)
metal clips, as indicated by the arrows in Figure 120, and then remove the instrument
panel trim.
Instrument panel trim
Figure 119
: Metal clip
: Pawl
Figure 120
33/57
NTB22-063B
84.
Remove the two (2) meter speaker mounting bolts, and then pull out the meter
speaker.
Meter speaker
Bolts (2)
Figure 121
85.
Disconnect the meter speaker wire harness connector, and then remove the meter
speaker.
86.
Disconnect the passenger airbag module wire harness connectors, and then
disconnect the gray GPS/Telematics antenna wire harness connector, if equipped.
Airbag module wire
harness connectors
GPS/Telematics
antenna wire
harness
connector
Figure 122
34/57
NTB22-063B
87.
Remove the two (2) airbag module mounting bolts.
Discard the airbag module mounting bolts, they will not be reused.
Airbag module
Bolts (2)
Figure 123
88.
Disengage the three (3) instrument panel fixing clips.
HINT: Take care not to drop the instrument panel fixing clips into the defroster ducts.
Clips (3)
Clips (3)
Defroster duct
Figure 124
89.
Figure 125
Remove the one (1) instrument panel mounting bolt (B) and ten (10) mounting screws
(A).
Screw (10)
Instrument panel
Figure 126
35/57
NTB22-063B
90.
Remove the instrument panel from the passenger side door opening.
HINT: The passenger side of the dash must be lifted high enough for the passenger
side airbag to clear the dash frame.
To avoid damage to the instrument panel, 2 people are needed to remove the
instrument panel from the vehicle.
Instrument panel
Instrument panel
Figure 127
Figure 128
To avoid the risk of death or severe personal injury:
Never allow oil, grease, detergent, or water to come in contact with an airbag
module.
Never insert any foreign objects into the airbag module.
Replace the airbag module if it is dropped or sustains an impact.
Always place an airbag module with the deploying direction facing upward
(Figure 129).
Always use new airbag module mounting bolts and screws.
Figure 129
36/57
NTB22-063B
91.
Remove the two (2) passenger airbag module mounting screws and discard, they will
not be reused.
Airbag module
Screws (2)
Figure 130
92.
Remove the passenger airbag module from the instrument panel in the order shown
in Figure 131 and Figure 132.
1.
2.
Figure 131
Figure 132
93.
Install the new passenger airbag module in the reverse order of removal.
94.
Install the instrument panel in the reverse order of removal.
Verify the (3) clips, (10) screws and (1) bolt are reinstalled.
Verify the two pin gray GPS/Telematics connector is plugged in, if equipped (step
86 on page 34).
Verify all speaker, optical sensor, sunload sensor, combination meter
, Intelligent
Key unit, A/C switch, and AV control unit wire harnesses are properly routed
through the appropriate instrument panel locations.
37/57
NTB22-063B
95.
Install and tighten new passenger airbag module mounting bolts.
Always use new airbag module mounting bolts.
Passenger airbag module mounting bolt torque: 22.3 N•m (2.3 kg-m, 16 ft-lb)
Connect the GPS/Telematics wire harness connector, if equipped.
96.
Install the meter speaker in the reverse order of removal.
97.
Install the instrument panel trim in the reverse order of removal.
98.
Install the optical sensor and sunload sensor in the reverse order of removal.
99.
Remove the protective tape from the instrument panel after installation.
Install the LH and RH instrument panel speaker and speaker grille in the reverse
order of removal.
100. Install new anchor clips on the LH and RH A-pillar, and then install the LH and RH Apillar trim in the reverse order of removal.
Remove the protective tape from the instrument panel after installation.
101. Install the RH side ventilator grille assembly in the reverse order of removal.
102. Install the Intelligent Key unit in the reverse order of removal.
103. Install the A/C switch and Center Ventilator Grille assembly in the reverse order of
removal.
Install wire harness fixing clip.
104. Install the AV control unit in the reverse order of removal.
105. Install the instrument pad B in the reverse order of removal.
To avoid damage to the AV control unit surface, cover the AV control unit with a clean
shop cloth prior to installing the instrument pad B.
106. Install the LH side ventilator grille assembly in the reverse order of removal.
38/57
NTB22-063B
107. Install the combination meter in the reverse order of removal.
108. Install the steering column assembly in the reverse order of removal.
IMPORTANT: Do not excessively pull on the steering column as the steering column
shaft will over-extend and the shaft splines will disengage.
Steering column upper mounting bolt torque: 16.7 N•m (1.7 kg-m, 12 ft-lb)
109. Install the cluster lid A in the reverse order of removal.
110. Install the driver knee airbag in the reverse order of removal.
Always use new airbag module mounting bolts.
Install wire harness fixing clips.
Verify that the wire harness connector lock is fully seated.
Driver knee airbag module mounting bolt torque: 8.0 N•m (0.8 kg-m, 71 in-lb)
111. Install the center instrument lower panel in the reverse order of removal.
Connect the wire harness connector and aspirator tube, if equipped.
112. Install the mood lamp in the reverse order of removal.
Remove the protective tape from the instrument panel after installation.
113. Install the switch panel in the reverse or of removal.
114. Install the LH instrument lower panel in the reverse order of removal.
Install the wire harness fixing clip.
Connect the wire harness connectors and the data link connector
115. Install the fuse block lid in the reverse order of removal.
116. Install the LH instrument mask in the reverse order of removal.
Remove the protective tape from the instrument panel after installation.
Install the LH body side welt.
117. Install the glove box in the reverse order of removal.
Connect the glove box light wire harness connector.
39/57
NTB22-063B
118. Install the RH instrument mask in the reverse order of removal.
Remove the protective tape from the instrument panel after installation.
Install the RH body side welt.
119. Install the center console assembly in the reverse order of removal.
Install the wire harness fixing clips.
Connect the wire harness connectors.
120. Install the center console rear finisher assembly in the reverse order or removal.
121. Install the electric shift selector in the reverse order of removal.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB22-063B
Replacement Service Bulletin Number:
MFR Communication Date: 2022-08-08
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SEATS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.