S.A.T.
USA

177 MV
1

Service Bulletin
Service Bulletin - Circulaire Technique - Circular Tecnica

th

Date:

14 February 2017

Subject:

New ECU Software

Product:

BRUTALE 800 RR MY 2015 – USA/CANADA
INCLUDING ALL VIN UNITS UP TO AND INCLUDING …V012004

This bulletin cancels and replaces the previous service bulletin No. 157
With the following Technical Communication, we inform you that a new mapping update is now
available for the BRUTALE 800 RR MY 2015.
The contents of the new map update introduce improvements on the electronic throttle control and
engine cranking strategies.

It is important that attention is paid in choosing the correct map
for the model, model year, VIN and version.
If you have any doubt on the choice of the correct mapping, we advise you to contact your
MV Agusta After Sales Technical Manager.
The installation of a different map from the expected one will be at the exclusive
responsibility of the Dealer.
MV AGUSTA MOTOR S.p.A. declines all responsibilities for any consequence (Civil and/or Penal
and/or Administrative) that the Dealer or third persons might incur due to the modification of the
motorbike ECU and/or a different utilization of the motorbike that is contrary to limits and
prohibitions provided from the local Law and Regulation concerning homologated power of
motorbikes that are destined to be used on public roads.
We ask you to perform the remapping procedure during initial set-up and before
consignment to the customer, during a service operation or at the first convenient
opportunity at your workshop.

Service Bulletin n° 177 - SW ECU B3 800 RR MY 15 Euro 3

1 /2

TOOLS NECESSARY FOR THE UPDATE:
TEXA Navigator IDC4 with software multi brand and cable 3151/AP34.
Re-mapping the ECU:
- Update your TEXA Navigator IDC4 instrument by connecting it to the internet with the
software IDC4, select “Software check” and begin the download of the version 26.0.0.A
- Check that the battery voltage is higher than 12.5 V and keep the battery charger connected during
the entire duration of reprogramming operations.
- Select “Bike – Diagnosis – Motorcycles - MV Agusta” and the desired motorcycle model,
- Press “ECU Update” followed by “Injection Reprogramming” and then the ECU ELDOR
- Select “self-diagnosis”.
- Connect to the motorcycle following the instructions of the program and then select “MAPPINGS”.

The installation of the new mapping needs boot BTMV4D-0300 before reprogramming: check the
Presence of BTMV4D-0300.
After the BOOT checking proceed with the installation of the map:

BRUTALE 800 RR MY 2015:
European market: “0516BM17” to be activated with password “NEMO#A8171w17”.
French market: “0516BN17” to be activated with password “NEMO#A9nu2c17”.
USA\Canada market: “0516BP17”to be activated with password “NEMO#B0zbsg17”.
Japanese market: “0516BR17” to be activated with password “NEMO#B1vyxq17”.
Kit steel racing exhaust: “0516BX17” to be activated with the password available on the card.

Follow the instructions to complete the installation.
- After the ECU flashing, verify in "ECU INFO" area that the code of the Calibration Version /
installed map is correct.
- Exit from current menu “ECU Update” and open menu “Self-diagnosis”.
- Select “Petrol injection” and the ECU model.
- Select “Setting” and then “Reset self-adapting parameters” follow the instructions to complete
the operation.
- Start the engine and let idle until cooling fan turns on. Do not manipulate the throttle during this
phase.
- Test the motorcycle before consignment to the customer in order to verify the correct functioning.
Thank you in advance for your collaboration we’ll remain available for any support.

Best Regards,
MV AGUSTA MOTOR S.p.A.
Technical Service Department

Service Bulletin n° 177 - SW ECU B3 800 RR MY 15 Euro 3

2/2