NHTSA ID Number: 10215456
Manufacturer Communication Number: RCA-14-22-002-1
TSB/Document Date: 2022-07-07
Summary
Rivian is initiating a customer satisfaction campaign for some model year 2022 R1T vehicles that may have been built with a low clearance condition between the front wheel speed sensor wire harness and the front dust shield. If the wheel speed sensor touches the front dust shield and this condition persists over time, the vehicle may experience a rub-through of the wires in the wheel speed sensor wire harness. The potential rub-through condition may cause the vehicle to enter into a reduced performance safe-state mode and a fault indicator light will illuminate on the driver display alerting the driver to have service performed on their vehicle. Rivian will inspect and, if necessary, reroute the harness or replace the wheel speed sensor to correct the condition. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian
vehicles.
RCA-14-22-002-1: Improperly Routed Wheel Speed
Sensor Harness
Rivian is initiating a customer satisfaction campaign for some model year 2022 R1T vehicles that may have been
built with a low clearance condition between the front wheel speed sensor wire harness and the front dust
shield. If the wheel speed sensor touches the front dust shield and this condition persists over time, the vehicle
may experience a rub-through of the wires in the wheel speed sensor wire harness. The potential rub-through
condition may cause the vehicle to enter into a reduced performance safe-state mode and a fault indicator
light will illuminate on the driver display alerting the driver to have service performed on their vehicle. Rivian
will inspect and, if necessary, reroute the harness or replace the wheel speed sensor to correct the condition.
Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.
Document Type
Customer Satisfaction Campaign
Bulletin
Date
June 8, 2022
Affected Region(s)
USA
Affected Model(s)
R1T
Model Year(s)
2022
Approximate Build Dates
August 2021 - November 2021
Refer to the FSA Dashboard to determine if this
document applies to a specific vehicle.
Vehicle System
14 - Brakes
Minimum Service Location
Mobile
Potentially Required Parts
Part Number
Quantity Engineering Name
Service Name/Notes
PT00052788-C
2
Sensor, Wheel Speed
WHEEL SPEED SENSOR
Attention: The parts listed in this table are only for unique steps that are called out in this bulletin.
Some sections of this bulletin might refer to Service Manual procedures which require additional parts.
Always review the bulletin and all potentially related Service Manual procedures before ordering parts
and beginning work.
RCA-14-22-002-1: Improperly Routed Wheel Speed Sensor Harness, Page 1
Inspection
1. Raise and Support Vehicle (refer to service manual procedure 981020017).
2. LH front: Inspect the wheel speed sensor for damage. Make sure the wheel speed sensor harness is
routed inward, as shown.
Note: Shown with components removed for clarity.
• If the wheel speed sensor is undamaged and the harness is routed inward, continue to the next
step.
• If the wheel speed sensor is damaged: Replace: Sensor, Wheel Speed, Front, LH (refer to service
manual procedure 147010010).
• If the wheel speed sensor harness is routed outward, perform the Reroute Harness procedure,
then continue to step 3.
3. Repeat step 2 on the RH side.
4. Reinstall all components that were removed for access and replace all non-reusable components.
Reroute Harness
1.
Note: Shown with components removed for clarity.
2. Install the component as described in the Installation section of Service Manual procedure 147010010.
RCA-14-22-002-1: Improperly Routed Wheel Speed Sensor Harness, Page 2
Torque specifications in this
section
Step Number Torque (Nm)
1
8
Labor Codes
Labor Code
Description
RCA142200200
RCA-14-22-002-1 not applicable
RCA142200201
Inspect front LH and RH wheel speed sensors; no additional work required
RCA142200202
Inspect front LH and RH wheel speed sensors; reroute front LH wheel speed sensor
RCA142200203
Inspect front LH and RH wheel speed sensors; reroute front RH wheel speed sensor
RCA142200204
Inspect front LH and RH wheel speed sensors; reroute front LH and RH wheel speed
sensors
RCA142200205
Inspect front LH and RH wheel speed sensors; replace LH wheel speed sensor
RCA142200206
Inspect front LH and RH wheel speed sensors; replace RH wheel speed sensor
RCA142200207
Inspect front LH and RH wheel speed sensors; replace LH and RH wheel speed
sensors
RCA142200208
Inspect front LH and RH wheel speed sensors; replace LH wheel speed sensor and
reroute front RH wheel speed sensor
RCA142200209
Inspect front LH and RH wheel speed sensors; replace RH wheel speed sensor and
reroute front LH wheel speed sensor
Contact ServiceDocumentFeedback@rivian.com regarding labor codes and document content.
RCA-14-22-002-1: Improperly Routed Wheel Speed Sensor Harness, Page 3
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: RCA-14-22-002-1
Replacement Service Bulletin Number:
MFR Communication Date: 2022-06-08
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.