NHTSA ID Number: 10213829
Manufacturer Communication Number: 24AX4Y
TSB/Document Date: 2022-06-13
Summary
ECM Software.
Emissions Service Action
Code: 24AX
____________________________________________________
Subject
Release Date
Revision Summary
Affected Vehicles
ECM Software
November 10, 2015
The U.S. market was added to this action
U.S.A. & CANADA:
Certain 2011-2013 MY Volkswagen 2.0L TFSI Vehicles
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
Problem Description
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Under certain conditions, the output signal from the vehicle’s Engine Control Module (ECM) to
the in-tank fuel pump may reduce fuel supply pressure to the fuel rail. If this happens, the
Malfunction Indicator Light (MIL) will illuminate, and the DTC code P0087 “Fuel Rail/System
Pressure – Too Low Bank 1” will be stored in the ECM. A vehicle with this condition will not
pass an IM (emissions) inspection.
Please be aware that other conditions (unrelated to the issue described in this action) may
cause the MIL in a vehicle to illuminate. Customers should be prepared to cover all diagnosis
and repair costs for these other, unrelated conditions.
Corrective Action
Install updated ECM software to address this issue.
Additionally, Volkswagen will provide an extended warranty for the injection pump in vehicles
included in this service action. Refer to the Warranty Service Circular for terms and conditions
of the extended warranty.
Parts Information
Code Visibility
This service action is a software update only; therefore no parts are required.
On or about November 10, 2015, affected vehicles will be listed on the Inventory Vehicle Open
Campaign Action report under My Dealership Reports (found on www.vwhub.com & OMD Web).
A list will not be posted for dealers who do not have any affected vehicles.
On or about November 10, 2015, this campaign code will show open on affected vehicles in
Elsa.
On or about November 10, 2015, affected vehicles will be identified with this campaign code in
the VIN Lookup tool at www.vw.com.
Owner Notification
Owner notification will take place on or about November 18, 2015. Owner letter examples are
included in this bulletin for your reference.
Emissions Campaigns
Requirements
(CALIFORNIA ONLY)
The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.vwhub.com.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2015 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
November 2015
24AX/4Y Page 1 of 20
Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Volkswagen dealer. 2013 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2013
XXXX/W7 Page 2 of 20
Claim Entry Instructions
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option.
Canada dealers: Fax repair order to Warranty at (905) 428-4811.
Service Number
24AX
Damage Code
0099
Parts Vendor Code
Claim Type
WWO
Sold vehicle: 7 10
Unsold vehicle: 7 90
Vehicle Wash/Loaner
Criteria I.D.
Do not claim wash/loaner under this action
01
Check/Updated software present, no further work required
Labor operation: 0183 00 99
10 T.U.
-ORUpdate software.
Labor operation: 2470 25 99
35 T.U.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2015 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
November 2015
24AX/4Y Page 3 of 20
Customer Letter Example (USA – 49S)
This notice applies to your vehicle:
Subject:
Emissions Service Action 24AX – ECM Software and Warranty Extension for Injection Pump
Certain 2011-2013 Model Year Volkswagen 2.0L TFSI Engine Vehicles
Dear Volkswagen Owner,
As part of Volkswagen's ongoing commitment to our environment, and in cooperation with the United States
Environmental Protection Agency and the California Air Resources Board, we are informing you of our decision to
conduct an emissions service action and extend the Emission Control Systems Warranty for injection pump replacement
on certain 2011-2013 model year Volkswagen 2.0L TFSI engine vehicles. Our records show that you are the owner of
a vehicle affected by these actions.
What is the issue?
Under certain conditions, the output signal from the vehicle’s Engine Control Module
(ECM) to the in-tank fuel pump may reduce fuel supply pressure to the fuel rail. If this
happens, the Malfunction Indicator Light (MIL) will illuminate, and the DTC code P0087
“Fuel Rail/System Pressure – Too Low Bank 1” will be stored in the ECM. A vehicle with
this condition will not pass an IM (emissions) inspection.
Please be aware that other conditions (unrelated to the issue described in this action)
may cause the MIL in a vehicle to illuminate. Customers should be prepared to cover all
diagnosis and repair costs for these other, unrelated conditions.
What will we do?
In order to help prevent this issue from affecting your vehicle, we have updated engine
control module (ECM) software available. Additionally, we are providing an extended
warranty for injection pump replacement. Details for both of these items are provided
below.
Emissions Service
Action 24AX – ECM
Software
Your authorized Volkswagen dealer will update the engine control module (ECM)
software in your vehicle to address this issue. This work will take about an hour to
complete and will be performed for you free of charge. Please keep in mind that your
dealer may need additional time for the preparation of the repair, as well as to
accommodate their daily workshop schedule.
In order to limit any possible inconvenience, please contact your authorized Volkswagen
dealer as soon as possible to schedule this service.
IMPORTANT!
Please note that if the ECM in your vehicle has been “chipped,” “tuned,”
or otherwise modified from original factory specifications with
aftermarket components and/or software, work needed to repair,
replace, or return the ECM to original factory specifications is NOT
covered under this action.
Warranty Extension for
Injection Pump
Volkswagen will extend your Emissions Control Systems Warranty for injection pump
replacement under specific conditions to 10 years or 120,000 miles, whichever occurs
first, from the vehicle's original in-service date. The vehicle's original in-service date is
defined as the date the vehicle was delivered to either the original purchaser or the
original lessee; or if the vehicle was first placed in service as a "demonstrator" or
"company" car, on the date such vehicle was first placed in service.
Certain states have voluntarily adopted California-mandated emissions warranties only
for vehicles equipped to meet California’s Partial Zero Emissions Vehicle (PZEV)
emissions requirements. These vehicles can be identified by inspecting the Vehicle
Emission Control Information Label located under the hood. Because of this, the owner
of a vehicle equipped to meet California’s PZEV emissions requirements living in one of
these states may have warranty rights that exceed the extended warranty offering
described in this letter. Please refer to the warranty information that came with your
vehicle for additional details as to whether or not this applies to your vehicle.
In our continuing efforts to assure proper performance of Volkswagen vehicles, your
dealer will diagnose and replace the injection pump, if necessary, at no cost to you as
long as the vehicle remains within the time and mileage limits of this warranty extension.
Please keep this letter with your Warranty booklet and deliver it to any new owner, along
with the owner’s manual.
This warranty extension covers only the diagnosis and replacement of the injection pump.
And, should you ever sell the vehicle, this warranty extension is fully transferable to
subsequent owners.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2015 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
November 2015
24AX/4Y Page 4 of 20
This warranty extension will not cover:
•
Any damage or malfunctions caused by installation of non-EPA or non-CARB
certified parts, or parts that alter the performance of the engine, engine controls,
or exhaust system, such as the installation of engine management components
(“chipped” or “tuned” ECMs) not approved by Volkswagen.
•
Other conditions unrelated to the injection pump that may cause the MIL to
illuminate. These conditions may require repairs that are needed for proper
diagnosis of the underlying condition. Any repairs that are (1) necessary for
proper diagnosis of these other conditions or (2) required to bring the vehicle’s
emission system up to factory specifications are not covered by this warranty
extension.
•
Damage or malfunctions caused by outside influence, such as damage due to
an accident, or vehicle misuse or neglect as well as repairs that are (1)
necessary for proper diagnosis of these other conditions or (2) required to bring
the vehicle up to factory specifications are not covered by this warranty
extension.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt.
If you have changed your address or sold the vehicle, please fill out the enclosed prepaid
Owner Reply card and mail it to us so we can update our records.
Reimbursement of
Expenses
If you have previously paid for repairs relating to the conditions described in this letter,
please refer to the enclosed form that explains how to request reimbursement.
Can we assist you
further?
If your authorized Volkswagen dealer fails or is unable to complete this work free of charge
within a reasonable time, or if you should have any questions about this communication,
please don’t hesitate to contact Customer CARE, Monday through Friday from 8AM to 6PM
(local time) by phone at 800-893-5298. You are also welcome to e-mail or chat through the
“Contact Us” page http://www.vw.com/contact/.
Checking your vehicle
for open Recalls and
Service Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign,
please click on the Look Up Recalls link at www.vw.com and enter your Vehicle
Identification Number (VIN) into the Recall/Service Campaign Lookup tool. As always, if
you have any questions or if you need additional assistance, please contact Customer
CARE or your authorized Volkswagen dealer.
We apologize for any inconvenience this matter may cause; however we are taking these actions to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Volkswagen Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2015 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
November 2015
24AX/4Y Page 5 of 20
Customer Letter Example (United States – California)
This notice applies to your vehicle:
Subject:
Pump
Emissions Service Action 24AX – ECM Software and Warranty Extension for Injection
Certain 2011-2013 Model Year Volkswagen 2.0L TFSI Engine Vehicles
Dear Volkswagen Owner,
As part of Volkswagen's ongoing commitment to our environment, and in cooperation with the United States
Environmental Protection Agency and the California Air Resources Board, we are informing you of our decision to conduct
an emissions service action and extend the Emission Control Systems Warranty for injection pump replacement on certain
2011-2013 model year Volkswagen 2.0L TFSI engine vehicles. Our records show that you are the owner of a vehicle
affected by these actions.
What is the issue?
Under certain conditions, the output signal from the vehicle’s Engine Control Module (ECM)
to the in-tank fuel pump may reduce fuel supply pressure to the fuel rail. If this happens,
the Malfunction Indicator Light (MIL) will illuminate, and the DTC code P0087 “Fuel
Rail/System Pressure – Too Low Bank 1” will be stored in the ECM. A vehicle with this
condition will not pass an IM (emissions) inspection.
Please be aware that other conditions (unrelated to the issue described in this action) may
cause the MIL in a vehicle to illuminate. Customers should be prepared to cover all
diagnosis and repair costs for these other, unrelated conditions.
What will we do?
In order to help prevent this issue from affecting your vehicle, we have updated engine
control module (ECM) software available. Additionally, we are providing an extended
warranty for injection pump replacement. Details for both of these items are provided
below.
Emissions Service
Action 24AX – ECM
Software
Your authorized Volkswagen dealer will update the engine control module (ECM) software
in your vehicle to address this issue. This work will take about an hour to complete and will
be performed for you free of charge. Please keep in mind that your dealer may need
additional time for the preparation of the repair, as well as to accommodate their daily
workshop schedule.
In order to limit any possible inconvenience, please contact your authorized Volkswagen
dealer as soon as possible to schedule this service.
IMPORTANT!
Please note that if the ECM in your vehicle has been “chipped,” “tuned,”
or otherwise modified from original factory specifications with
aftermarket components and/or software, work needed to repair,
replace, or return the ECM to original factory specifications is NOT
covered under this action.
Important information for
California Vehicle
Owners – California
Regulations
California regulations require that this campaign be completed prior to the time you renew
your vehicle registration. Therefore, please make sure that this campaign is completed
prior to the renewal of your vehicle registration, and that you furnish proof of completion
to the Department of Motor Vehicles (DMV) in the form of a copy of the dealer’s repair
order, including a signed “Proof of Correction” certificate. You obtain this from your dealer
after the campaign has been completed. Please retain the signed “Proof of Correction
Certificate” with your vehicle records. DO NOT MAIL THIS FORM to the DMV, unless
requested.
Warranty Extension for
Injection Pump
Volkswagen will extend your Emissions Control Systems Warranty for injection pump
replacement under specific conditions to 10 years or 120,000 miles, whichever occurs first,
from the vehicle's original in-service date. The vehicle's original in-service date is defined
as the date the vehicle was delivered to either the original purchaser or the original lessee;
or if the vehicle was first placed in service as a "demonstrator" or "company" car, on the
date such vehicle was first placed in service.
Certain states have voluntarily adopted California-mandated emissions warranties only for
vehicles equipped to meet California’s Partial Zero Emissions Vehicle (PZEV) emissions
requirements. These vehicles can be identified by inspecting the Vehicle Emission Control
Information Label located under the hood. Because of this, the owner of a vehicle equipped
to meet California’s PZEV emissions requirements living in one of these states may have
warranty rights that exceed the extended warranty offering described in this letter. Please
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2015 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
November 2015
24AX/4Y Page 6 of 20
refer to the warranty information that came with your vehicle for additional details as to
whether or not this applies to your vehicle.
In our continuing efforts to assure proper performance of Volkswagen vehicles, your dealer
will diagnose and replace the injection pump, if necessary, at no cost to you as long as the
vehicle remains within the time and mileage limits of this warranty extension. Please keep
this letter with your Warranty booklet and deliver it to any new owner, along with the
owner’s manual.
This warranty extension covers only the diagnosis and replacement of the injection pump.
And, should you ever sell the vehicle, this warranty extension is fully transferable to
subsequent owners.
This warranty extension will not cover:
•
Any damage or malfunctions caused by installation of non-EPA or non-CARB
certified parts, or parts that alter the performance of the engine, engine controls,
or exhaust system, such as the installation of engine management components
(“chipped” or “tuned” ECMs) not approved by Volkswagen.
•
Other conditions unrelated to the injection pump that may cause the MIL to
illuminate. These conditions may require repairs that are needed for proper
diagnosis of the underlying condition. Any repairs that are (1) necessary for
proper diagnosis of these other conditions or (2) required to bring the vehicle’s
emission system up to factory specifications are not covered by this warranty
extension.
•
Damage or malfunctions caused by outside influence, such as damage due to an
accident, or vehicle misuse or neglect as well as repairs that are (1) necessary
for proper diagnosis of these other conditions or (2) required to bring the vehicle
up to factory specifications are not covered by this warranty extension.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the enclosed
prepaid Owner Reply card and mail it to us so we can update our records.
Reimbursement of
Expenses
If you have previously paid for repairs relating to the conditions described in this letter,
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 24AX4Y
Replacement Service Bulletin Number:
MFR Communication Date: 2017-12-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.