Installation and Conversion Instructions

All
20/14

ENU

6692

6

Roof box (520 liter)

Vehicle Types:

•
•
•
•
•
•
•
•
•
•
•
•

Taycan Cross Turismo (Y1B) – all vehicles with roof rails (3S1/3S2) with roof transport
system (TEQUIPMENT)
Taycan (Y1A) – all vehicles with panoramic fixed-glass roof (3FG) with roof transport system
(TEQUIPMENT)
Macan (95B) – all models with roof rails (I-no. 3S1/3S5) or with roof transport system (5W1/5W4)
911 Carrera (992)/Turbo (992) – all models, body type: ONLY for Coupé with roof transport
system (TEQUIPMENT)
911 Carrera (991)/Turbo (991) – all models, body type: Coupé ONLY with roof transport
system (549)
911 Carrera (997)/Turbo (997) – all models, body type: Coupé ONLY with roof transport
system (549)
Panamera (971) – all models, NOT Executive with roof transport system (549 or TEQUIPMENT)
Panamera (970) – all models, NOT Executive with roof transport system (549)
Cayenne Coupé (9YB) – all models with roof transport system (TEQUIPMENT)
Cayenne (9YA) – all models with roof rails (3S1/3S2) and roof transport system (5W1/5W4)
Cayenne (92A) – all models with roof rails (3S1/3S5) or with roof transport system (5W1/5W4)
Cayenne (9PA) – all models with roof rails (3S7) or with roof transport system (3S8)

Model Year:

As of 2003

Information:

Instructions for assembly and use

Figure 1
Note:

A roof box (520 liter) ( Figure 1) can be installed on the base carriers (roof rail bars or roof transport
system, referred to below simply as "roof transport system") of the vehicles specified above.

Tequipment

Aug 4, 2021
Page 1 of 11

6

All
6692

ENU

Installation and Conversion Instructions

20/14

The roof box (520 liter):
•
•
•
•
•

Parts Info:

was tested on the vehicles specified above and adapted accordingly;
increases the luggage space of the vehicle by approx. 520 liters;
can be opened from either longitudinal side;
has air ducts running lengthways, which minimize drag and interfering driving noises;
has a safety closing system. The key can be removed only when the lid of the roof box (520 liter) is
closed properly. To close the lid properly, all six closing points must be closed and the key must be
at the "locked" position.

958.044.000.12

 Roof box (520 liter) –color: black–, set

958.044.000.13

 Roof box (520 liter) –color: Platinum Look–, set

Parts List:

Figure 2

Aug 4, 2021
Page 2 of 11

———

1x

Roof box (520 liter)  Figure 2 -1-

955.044.000.59

2x

 Key with key code, set  Figure 2 -2-

———

3x

Tension strap  Figure 2 -3-

———

1x

Warning (sticker)  Figure 2 -4-

———

4x

T-bolt, M8 x 55  Figure 2 -5-

Tequipment

Installation and Conversion Instructions

Spare Parts:

Note:

All
20/14

ENU

6692

———

4x

Clamping piece  Figure 2 -6-

———

8x

Butterfly nut, M8  Figure 2 -7-

———

2x

Profile rail (ski support)  Figure 2 -8-

———

4x

Sliding block (plastic)  Figure 2 -9-

———

4x

Hexagon-head bolt, M8 x 45  Figure 2 -10-

———

1x

Instructions for assembly and use (not shown)

958.044.000.21

1x

 Assembly kit (small parts/spare parts), set comprising:

———

3x

Tension strap  Figure 2 -3-

———

4x

T-bolt, M8 x 55  Figure 2 -5-

———

4x

Clamping piece  Figure 2 -6-

———

4x

Butterfly nut, M8  Figure 2 -7-

6

The keys ( Figure 2 -2-) can be re-ordered if lost by specifying the part number and the code "Nxxx"
(possible codes range from N001 to N200) specified on the lock cylinder.

Technical Data: •
•
•
•
1

Max. length: approx. 2,180 mm/ 85.83 in
Max. width: approx. 895 mm/ 35.24 in
Max. height: approx. 400 mm/ 15.75 in
Empty weight: 26 kg/ 57.3 lbs1
Observe permissible roof load for the vehicle ( Owner's Manual, section on 'Weights')!

WARNING
Improper loading and installing of the roof transport system or add-on modules
•

Danger of objects falling down

•

Danger of objects sticking out



Load the roof transport system or add-on modules in such a way that the load does not project over the
sides of the roof area.



Select the distances between several add-on modules mounted next to each other so that the transported
items cannot bump against each other during the trip.



Secure load sufficiently to prevent it from shifting during the trip.



Check the roof transport system or add-on modules regularly before each trip and during an extended
trips to make sure they are seated correctly and securely on the vehicle.

Tequipment

Aug 4, 2021
Page 3 of 11

6

All
6692

ENU

Installation and Conversion Instructions

20/14

CAUTION
Driving with a roof load
•

Higher center of gravity

•

Larger area exposed to the wind

•

Different vehicle handling



Adapt driving style accordingly.



Read the speed instructions and general information on the "Roof transport system" in the Owner's
Manual.

Information
Please inform the customer of this accordingly.
CAUTION
Risk of damage to the load or to the roof box if
•

profile rails (ski supports) are not secured.



Never transport profile rails (ski supports) in the roof box unsecured. Always fasten them as described in
the instructions for use.

Work Procedure: 1

Preparing roof box (520 liter) for mounting
Information
When opening, make sure that the opposite lock is locked.
1.1

Unpack the roof box and unlock it with one of the keys supplied. Turn the key clockwise to do
this.

1.2

Install the clamping pieces
1
2
3
4
5
6
1.2.1

Aug 4, 2021
Page 4 of 11

– Perforated strips
– Guide in the roof box floor
– Desired breaking point (bore) in the
perforated strip
– T-bolt, M8 x 55
– Clamping piece
– Butterfly nut, M8
Move all four perforated strips
into the guides so that the center
desired breaking point (bore) is
centered in the cut-out on the guide.

Figure 3

1.2.2

Press a T-bolt (M8 x 55) through the desired breaking point (bore) from below.

1.2.3

Install clamping piece onto the thread of the T-bolt.

Tequipment

Installation and Conversion Instructions
1.2.4

All
20/14

ENU

6692

6

Loosely install M8 butterfly nut ( Figure 3).
Install the remaining 3 clamping pieces in the same way.

1.3

Installing ski supports
1
2
3

– Hexagon-head bolt, M8 x 45
– Sliding block (plastic)
– Ski support

1.3.1

Position hexagon-head bolt (M8 x
45) into the (plastic) sliding block
with the bolt head flush ( Figure 4
-A-).

1.3.2

Guide the (plastic) sliding block
together with the M8 x 45
hexagon-head bolt into the groove
on the underside of the ski support ( Figure 4 -B-).

Figure 4

Install the remaining sliding blocks in the same way.
1.3.3

Align the two sliding blocks
(underside of ski support) with
respect to the width of the
perforated strips (guide rail) in
the roof box floor ( Figure 5 -A,
arrows-).

1.3.4

Position thread of the M8 x 45
hexagon-head bolt on the desired
breaking point in the perforated
strip ( Figure 5 -inset A-).

1.3.5

Carefully press the ski support
with the thread of the M8 x 45
hexagon-head bolt into the
perforated strip ( Figure 5 -B-)
until the ski support is positioned on
the guide rail.

1.3.6

Secure the ski support to the
underside of the roof box with two
M8 butterfly nuts ( Figure 5 -C-).

Figure 5

Install the second ski support in the same way.
1.4
2

Lock roof box (520 liter).

Install roof transport system on the vehicle ( Owner's Manual, section on 'Roof Transport System').

Tequipment

Aug 4, 2021
Page 5 of 11

6

All
6692

ENU

3

Installation and Conversion Instructions

20/14

ONLY for Cayenne (9PA; MY 2003 – 2010): Position roof carrier systems on the vehicle.