NHTSA ID Number: 10200497
Manufacturer Communication Number: MC610121
TSB/Document Date: 2021-08-23
Summary
Special vehicles, Police, for example, should be configured/encoded with ISTA.
- 6113 8366247
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 11
CUSTOMER LOAD ON OUTPUT OF FRONT STOP SIGNAL (GMSF PIN 35)
Requirement: No front stop signal may be installed; the SA242 must not be included in the vehicle order
KLBF: 12 V on Pin 35 GMSF (A362) to plug (X1464*1B und 2B; Pin 2)
12 Volt power supply on plug front stop signal with pressing button „N“(max. 2 Ampere; 30 minutes after-run time)
Ground on plug X1464*1B u 2B Pin 1
(Softwarebug: lag time only 4 minutes, Failure solved with I-level K001-20-07-500)
- Correct connector plug (X1464*2B):
- 6113 8365393
Pin housing (3-pin)
- 6113 1393703
Pin contact (0,2-0,5mm²)
- 6113 8366247
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 12
CUSTOMER LOAD ON OUTPUT OF REAR STOP SIGNAL (GMSF PIN 36)
Requirement: No rear stop signal may be installed; the SA521must not be included in the vehicle order
KLSH: 12 V on Pin 36 GMSF (A362) to plug (X1214*1B und 2B ; Pin 2)
12 Volt power supply on plug rear stop signal with pressing button „M“(max. 2 Ampere; 30 minutes after-run time)
Ground on plug X1214*2B Pin 1
(Softwarebug: lag time only 4 minutes, Failure solved with I-level K001-20-07-500)
- Correct connector plug (X1214*2B):
- 6113 8365393
Pin housing (3-pin)
- 6113 1393703
Pin contact (0,2-0,5mm²)
- 6113 8366247
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 13
CUSTOMER LOAD ON OUTPUT OF REAR FOG LIGHT (GMSF PIN 47)
Requirement: No rear fog light may be installed; the SA573 must not be included in the vehicle order
KLNS: 12 V on Pin 47 GMSF (A362) on plug (E165*1B Pin2)
12 Volt power supply on rear fog light with pressing button „I“ (max. 2 Ampere; no after-run time)
Ground on plug E165*1B Pin 1
Correct connector plug (E165*1B):
- 8330 0402344
Repair plug (2-pin)
- or
- 6113 8366275
Pin housing (2-pin)
- 6113 8366269
Pin contact (0,5-0,75mm²)
- 6113 8366245
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 14
FLASHING WARNING LIGHTS HEADLIGHT (ALTERNATING HEADLIGHT)
The "Alternating headlight" can be set in 3 different frequencies (low beam and high beam are controlled alternately):
SB10: Flashing warning lights headlight 1 Hz
SB15: Flashing warning lights headlight 1,5 Hz
SB20: Flashing warning lights headlight 2 Hz
With active front flashing lights is the alternating headlight activated, when there is enough light (light sensor in the I-kombi)
(Softwarebug with TFT; Failure solved with I-level K001-21-03-500)
Furthermore, the alternating front light can be switched off with a long press on the "J" key
For this function is following Ho-word necessary:
AFAN: Do not save alternating frontal light state
or
AFAS: Save alternating frontal light state
(Softwarebug with US variant: can not be switched off with button „J“; Failure solved with I-level K001-21-07-500)
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 15
POWER SUPPLY FOR ELECTRICAL ACCESSORIES ON SA-PLUG WITH FRONT
FLASHING LIGHTS
With active front flashing lights, a 12 volt power supply is also supplied to the SA plug
XK46: 12 V on Pin 46 GMSF (A362) to plug (X886*1B Pin 3)
Ground on plug X886*1B Pin 1
- Correct connector plug (X886*1B):
- 6113 8364625
Pin housing (6-pin)
- 6113 8366269
Pin contact (0,5-0,75mm²)
- 6113 8366245
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 16
INDIVIDUALISATION AUTHORITY BIKE
GUIDELINE FOR CODING IN ISTA (R1250RT AUTHORITY BIKE)
EX-VC-2I May 2020
INTRODUCTION „INDIVIDUALISATION AUTHORITY BIKE“
In this guideline are shown some individualizations for the R1250RT authority bike in simplified form
Basically:
➢ All representation are only recommendations and are not mandatory coding
➢ HO-Words with similar functions interfere with each other
-> HO-Words are codings that can be imported via ISTA
➢ This manual describes the coding options without the SA877 (radio preparation)
->Circular 6/2016 (German market only) must be observed for vehicles with the SA877
->The HO-Words F1P1,F1P2 und F1DP (for example function key 1) are controlled over LIN-Bus and can only operated with the SA877
➢ This manual describes the coding options without the SA113 (US authority), because all outputs of the GMSF are already pre-assigned
Hint:
The predecessor R1200RT authority bike (K52 SF) has slight deviations (see circuit diagram)
The Pinning from stop signal (front and rear) was changed
The GMSF Pin output 23 and 35 was exchanged
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 2
DIRECTORY
HO-Words:
ISTA description:
Page:
➢ F1PT
12 V supply plug connection radio
4
➢ F1VF,F2VF,F3VF o. F4VF
Supply voltage to radio (X865 Pin2)
5
➢ F1SA,F2SA,F3SA o. F4SA
Activation of pin 46 (GMSF)
6
➢ F123,F223,F323 o. F423
Switching output of rear STOP signal indicator (X1214*2B Pin 3)
7
➢ F135,F235,F335 o. F435
Switching output of front STOP signal indicator (X1464*1B u. 2B Pin 2)
8
➢ F136,F236,F335 o. F436
Switching output of rear STOP signal indicator (X1214 *1B u. 2B Pin 2)
9
➢ F147,F247,F347 o. F447
Switching output of rear fog light (E165 Pin2)
10
➢ KLSV
Customer load at rear STOP signal indicator output (GMSF Pin 23)
11
➢ KLBF
Customer load at front STOP signal indicator output (GMSF Pin 35)
12
➢ KLSH
Customer load at rear STOP signal indicator output (GMSF Pin 36)
13
➢ KLNS
Customer load on output of rear fog light (GMSF Pin 47)
14
➢ SB10,SB15,SB20
Activation of alternating headlights with authority lights switched on
15
➢ AFAN,AFAS
Storage options for the alternating front light operating mode
15
➢ XK46
12 V output on pin 46 (GMSF) active, when front flashing beacons are activated
16
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 3
POWER SUPPLY FOR RADIO WITH IGNITION ON (WITHOUT SA877)
F1PT: 12 V on Pin 5 GMSF (A362) to (plug X865*1B Pin 2)
12 Volt power supply for radio with ignition “ON” (max. 10 Ampere; 90 minutes after-run time)
Ground on plug X865*1B Pin1
- Correct connector plug (X865*1B):
- 6113 8367075
Pin housing (4-pin)
- 6113 1376193
Pin contact (1,5-2,5mm²)
- 6113 9344421
Pin contact (2,5-4,0mm²)
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 4
SWITCHING OUTPUT FOR RADIO ABOUT THE FUNCTION KEY (WITHOUT SA877)
F1VF; F2VF;F3VF o. F4VF: 12 V on Pin 5 GMSF (A362) to (plug X865*1B Pin 2) with function key
12 Volt power supply for radio with pressing function key (max. 10 Ampere; 90 minutes after-run time)
Ground on plug X865*1B Pin 1
For this function is also additional HO-Word required (for example function key 1):
F1SA: Power supply to plug X865*1B
F1TR: Latching function
or
F1TT: Keying function
- Correct connector plug (X865*1B):
- 6113 8367075
Pin housing (4-pin)
- 6113 1376193
Pin contact (1,5-2,5mm²)
- 6113 9344421
Pin contact (2,5-4,0mm²)
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 5
SWITCHING OUTPUT FOR ELECTRICAL ACCESSORIES ON SA-PLUG ON
FUNCTION KEY
F1SA; F2SA; F3SA o. F4SA: 12 V on Pin 46 GMSF (A362) to (plug X886*1B Pin 3)
12 Volt power supply on SA-plug with pressing function key (max. 6 Ampere; 90 minutes after-run time)
Ground on plug X886*1B Pin 1
For this function is also additional HO-Word required (for example function key 1):
F1TR: Latching function
or
F1TT: Keying function
- Correct connector plug (X886*1B):
- 6113 8364625
Pin housing (6-pin)
- 6113 8366269
Pin contact (0,5-0,75mm²)
- 6113 8366245
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 6
SWITCHING OUTPUT OF REAR STOP SIGNAL ON FUNCTION KEY (GMSF PIN 23)
Requirement: No rear stop signal may be installed; the SA521must not be included in the vehicle order
F123; F223; F323 o. F423: 12 V on Pin 23 GMSF (A362) to plug (X1214*2B Pin 3) with function key
12 Volt power supply on plug rear stop signal with pressing function key (max. 0,65 Ampere; 30 minutes after-run time)
Ground on plug X1214*2B Pin 1
(Softwarebug: no 12 Volt power supply, Failure solved with I-level K001-20-11-501)
For this function is also additional HO-Word required (for example function key 1):
F1SA: Power supply to plug X1214
F1TR: Latching function
or
F1TT: Keying function
- Correct connector plug (X1214*2B):
- 6113 8365393
Pin housing (3-pin)
- 6113 1393703
Pin contact (0,2-0,5mm²)
- 6113 8366247
Single wire sealing
- 6113 8366249
Sealing grommet
-
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 7
SWITCHING OUTPUT OF FRONT STOP SIGNAL ON FUNCTION KEY (GMSF PIN 35)
Requirement: No front stop signal may be installed; the SA242 must not be included in the vehicle order (plug behind the instrument cluster)
F135; F235; F335 o. F435: 12 V on Pin 35 GMSF (A362) to plug (X1464*1B and 2B Pin 2) with function key
12 Volt power supply on plug front stop signal with pressing function key ( max. 2 Ampere; 30 minutes after-run time)
Ground on plug X1464*1B and 2B Pin 1
For this function is also additional HO-Word required (for example function key 1):
F1SA: Power supply to plug X1464*2B
F1TR: Latching function
or
F1TT: Keying function
- Correct connector plug (X1464*2B):
- 6113 8365393
Pin housing (3-pin)
- 6113 1393703
Pin contact (0,2-0,5mm²)
- 6113 8366247
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 8
SWITCHING OUTPUT OF REAR STOP SIGNAL ON FUNCTION KEY (GMSF PIN 36)
Requirement: No rear stop signal may be installed; the SA521must not be included in the vehicle order
F136; F236; F336 o. F436: 12 V on Pin 36 GMSF (A362) to plug (X1214*1B u. 2B Pin 2) with function key
12 Volt power supply on plug rear stop signal with pressing function key (max. 2 Ampere; 30 minutes after-run time)
Ground on plug X1214*B Pin 1
For this function is also additional HO-Word required (for example function key 1):
F1SA: Power supply to plug X1214*2B
F1TR: Latching function
or
F1TT: Keying function
- Correct connector plug (X1214*2B):
- 6113 8365393
Pin housing (3-pin)
- 6113 1393703
Pin contact (0,2-0,5mm²)
- 6113 8366247
Single wire sealing
- 6113 8366249
Sealing grommet
Individualisation Authority Bike| EX-VC-2 | May 2020
Page 9
SWITCHING OUTPUT OF REAR FOG LIGHT ON FUNCTION KEY (GMSF PIN 47)
Requirement: No rear fog light may be installed; the SA573 must not be included in the vehicle order
F147; F247; F347 o. F447: 12 V on Pin 47 GMSF (A362) to plug (E165*1B Pin2) with function key
12 Volt power supply on rear fog light with pressing function key (max. 2 Ampere; no after-run time)
Ground on plug E165*1B Pin 1
For this function is also additional HO-Word required (for example function key 1):
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: MC610121
Replacement Service Bulletin Number:
MFR Communication Date: 2021-05-05
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
/
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.