Loading...

NHTSA ID Number: 10200459

Manufacturer Communication Number: V871808204903912

TSB/Document Date: 2021-09-02


Summary

Cleaning of R1234YF Refrigerant Circuit. Updated to correct part number.


Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

Condition
Applicable Vehicles
Model(s)

Year

Eng. Code

Trans. Code

VIN Range
From

VIN Range To

All Models

2018-2022

All

All

All

All

Revision Table
Instance Number

Published Date

Version Number

Reason For Update

2049039/12

8/12/21

87-18-08

Correction to part
number N 0385494.

2049039/11

7/28/21

87-18-08

Update model year
applicability.
Parts added for one time
use self-locking bolt and
rivet for sound baffle.

2049039/10

5/25/21

87-18-08

Note added to step 27.

2049039/9

3/24/21

87-18-08

Update model year
applicability.

2049039/1

11/9/17

V871713

Original publication.

Debris can be dispersed throughout the refrigerant circuit after A/C component damage. In order to
maintain A/C operating efficiency, it is important to flush the refrigerant circuit after A/C component
repairs.
Note:
This bulletin must be read in its entirety before beginning repair.

Page 1 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

Technical Background
In cases where an air conditioning system component (such as a compressor or other system
component) has failed and debris from the compressor or component is circulated throughout the
refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the
replacement components will result.
Note:
Any replacement of A/C compressors-regardless of the reason for failure must complete the AC flush
procedure to ensure the proper amount of oil is re-introduced into the refrigerant system.

Production Solution
No production change required.

Service
Tools
Use an approved R1234yf servicing machine and the
R1234yf Flush Kit RTI360831840 (Figure 1).
Used for effective refrigerant handling and air
conditioning circuit flushing after air conditioning
component failure.

Figure 1. The VAS581005 Air Conditioning
Service System with Flushing Device.

Page 2 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

The VAS 6338/1 Adapter Set for Refrigerant Circuits along with an additional adapter VAS 6338/38 for
the expansion valve bypass this kit, contains the adapters necessary to complete a thorough flush
operation of a contaminated circuit.
Elsa contains the technical information for each model regarding the necessary adapter
applications and connections of the servicing station for the flush operation. See Heating,
Ventilation & Air Conditioning >> Refrigerant R1234yf-Servicing >> 00 General Technical
Data>> Refrigerant Circuit removing contaminates>> Refrigerant Circuit, Flushing with
Refrigerant R1234yf in Elsa.
All other refrigerant recovery, evacuation and recharge operations are performed using the usual
procedure specified in Elsa. An operations manual will accompany each servicing station that will
describe operation of the unit.
Procedure
Front A/C:
1. If an air conditioning component has been diagnosed as the root cause of the failure, and this
particular component has been verified to have released debris through the circuit, continue with the flush
procedure.
2. Switch the power to the servicing station ON and begin by recovering the refrigerant from the system
through the normal service fittings.
Note:
For all compressor replacements it is mandatory to flush the system of all oil in the system. The
replacement compressor comes with a full charge of oil for a complete A/C system.
Tip:
During the entire process avoid interrupting the power to the station. The station's internal memory will
keep a log of all operations and can conveniently be recalled and printed. If the power is interrupted, the
station will lose the memory of the process, and the oil volume recovered, oil volume added, refrigerant
volume recovered, etc. will have to be manually determined.
3. Disconnect the service hoses from the AC service ports of the refrigerant circuit.
The VAS 6338/1 adapters will be used to bypass the following:
 Compressor.
 Expansion Valve.
 Rear AC lines to rear AC unit (If Equipped)
 Rear AC unit Expansion Valve (If Equipped)

Page 3 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

Note:
For models with receiver drier desiccant cartridge the desiccant cartridge must be removed for the
flushing process.
For vehicles where the receiver drier is located on the condenser and DOES NOT have a remove-able
desiccant cartridge, the receiver drier must be left in the system and flushed through.
After the flush procedure is complete replace the receiver drier or drier cartridge.
4. Install the approved R1234yf servicing machine.
5. Remove Receiver Drier. Refer to Elsa Repair Manual.
Note:
For Atlas, the front bumper does not need to be removed as stated in the Elsa repair manual.
When removing front grille ensure ignition is switched OFF and negative battery cable is disconnected
before disconnecting the front distance regulation module.
6. Remove receiver drier cartridge.
Reinstall cartridge cap with O-ring. (Figure 2)

Figure 2. Location of the Receiver Drier

Page 4 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

7. Remove expansion valve and install flush plate
VAS 6338/38. (Figure 3)

Figure 3. Installation of front expansion valve
bypass adaptor VAS 6338/38.

Note:
(Atlas Only) The rear A/C unit refrigerant lines must
be disconnected and replaced with block off
adaptors VAS 6338/5 and VAS 6338/63 before
performing the front A/C unit flush procedure.
8. (Atlas Only) Disconnect rear refrigerant lines and
install adaptors VAS 6338/5 and VAS 6338/63 as
shown. (Figure 4a, 4b)

Figure 4a. Installation of high side rear A/C Line
connection block adaptor VAS 6338/63.

Page 5 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

Figure 4b. Installation of Low side rear A/C Line
connection block adaptor VAS 6338/5.

9. Remove A/C Recovery machine high side
coupler from hose.
Install flush adaptor VAS 6338/48 to high side A/C
recovery machine hose. (Figure 5)
Note:
You do not have to remove low side A/C hose
coupler. The low side coupler will be connected to
the flush tank filter adaptor.

Figure 5. A.C hose adaptor 6338/44

Page 6 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

10. Disconnect A/C compressor hoses from the
compressor.
Install flush adaptor VAS 6338/3 on the high side
compressor hose.
Install flush adaptor VAS 6338/12 on low side
compressor hose. (Figure 6)

Figure 6. Installation of VAS 6338/3 and 6338/12.

11. Attach high side A/C Recovery machine hose
with VAS 6338/48 fitting to low side compressor
hose adaptor VAS 6338/12. (Figure 7)

Note:
This connection strategy allows for a system flush
in the opposite direction of the normal refrigerant
flow.

Figure 7.

Page 7 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

12. Connect the low side A/C machine coupler to
the flush tank filter adaptor. (Figure 8)

Figure 8.

13. Connect flush tank hose (Yellow) to the high
side compressor hose adaptor VAS 6338/3. (Figure
9)

Figure 9.
14 Perform an extended 3 cycle flush.
15. After the flush process completes remove any adapters that were installed from the VAS 6338/1.
16. (Atlas Only) Proceed to section for cleaning the rear A/C unit. All others models continue to step 17.
17. Install a new Expansion Valve and Receiver Drier Cartridge. Reassemble all refrigerant lines.
18. Print the extended flush log of the job and attach to the repair order.
Page 8 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

19. Connect the station in the usual manner through the service fittings and perform the normal
evacuation and refrigerant recharge operations.
Note:
For Atlas a rear A/C unit flush must be performed before vacuum testing and recharging.
Atlas Rear A/C Unit
The flush process will be repeated for the additional rear air conditioning unit according to the repair
information in Elsa.
20. Lower the exhaust buy removing the rear
exhaust clamp and single rubber hanger. (Figure
10)

Figure 10.

Page 9 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

21. Remove the cross bar located in the center
under carriage area. (Figure 11)

Figure 11.

22. Remove middle heat shield from under
previously removed cross bar to access rear
expansion valve. (Figure 12)
Note:
Replace the clamping washer before reinstalling the
heat shield.

Figure 12.

Page 10 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

Release date:

8/12/2021

23. Remove rear expansion valve and install
VAS6338/38 as shown. (Figure 13)

Figure 13. Location of rear air conditioning unit
expansion valve.

24. Connect the VAS 6338/3 and VAS 6338/60 to
the rear refrigerant A/C lines (Figure 14)

Page 11 of 20
© 2021 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)

Transaction
No:

2049039/12

12

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
SaleBestseller No. 2
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
  • 【FOR END USER & DIYERS】 This error code reader AL319 is...
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


If the PDF is very large, it may not load in the preview below.

Download PDF [580.31 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: V871808204903912

Replacement Service Bulletin Number:

MFR Communication Date: 2021-08-12

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: EQUIPMENT:ELECTRICAL

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bidirectional Test Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update
751 Reviews
KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bidirectional Test Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update
  • Obd2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15 reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth obd2 scanner diagnostic tool ideal for diy's and private car owners
  • Bidirectional Control for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping Diy users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
  • 15 Maintenance Resets: The current version introduces 15 popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
  • Wide Compatibility CANFD & FCAeBay logo Autoauth: Compatible with GM, FordeBay logo, ToyotaeBay logo, ChryslereBay logo, HondaeBay logo, MazdaeBay logo, NissaneBay logo, MitsubishieBay logo, HyundaieBay logo, KIAeBay logo with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCAeBay logo cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase.
  • Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis.
SaleBestseller No. 2
KINGBOLEN K7 Bidirectional Scan Tool 2026 OBD2 Scanner Bluetooth with Lifetime Updates, No Annual Fees, 31+ Resets, Component Matching, All System Diagnostic, CAN FD, FCA AutoAuth, Crankshaft Relearn
  • No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
  • 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for FordeBay logo, LincolneBay logo, MazdaeBay logo, Global version for 100+ brand vehicles and 17 languages, no area limit, FCAeBay logo AutoAuth
  • OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
  • Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
  • 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
SaleBestseller No. 3
KINGBOLEN K8 Pro OBD2 Scanner Bluetooth 2026 Bidirectional Scan Tool with Lifetime No Subscription Update 8'' All System Diagnostic Tool, ECU Code, 34+ Reset, CANFD&DOIP, V.A.G Guide, FCA AutoAuth
  • 【Lifetime Database & Software Updates— No Subscription Fee, No Feature Lock, Save you $399/Y】KINGBOLEN K8 Pro's software can already be permanently upgraded and used for while software of other same price product still needs annual fee of almost $400. K8 pro scanner has packed all capabilities auto technicians would ever need for repair & maintenance services: Added CAN-FD & DOIP protocol, Bluetooth Wireless Diagnosis, Bidirectional Test, ECU Online/Offline Code & Guided Functions for VWeBay logo, for AudieBay logo...34+ Restes, Autoauth for FCAeBay logo SGW, Larger 4GB+64GB memory, 12600mAh battery, 8'' touch screen with 1280 * 800 Resolution. A Kickstand can allow the tablet to sit at a comfortable angle
  • 【Newly Added CAN FD & DOIP Protocol】As Upgrade Version of Kingbolen K8, K8 Pro obd2 scanner supports CANFD and DOIP protocol, which will save you 200+ bucks as no need extra buy for special adapter. CANFD protocol suits for the latest GM(2019-), reducing the risk of undetected errors. The DoIP protocol (comes with DoIp cable) fits for 2017+ BMWeBay logo(F&G chassis), for JaguareBay logo & Land RovereBay logo after 2017, for VolvoeBay logo after 2018. Plus, K8 Pro's Memory from 2G+32G expanded to 4G+64G, update period extended from 2 years to permanent
  • 【34+ Hot Special Functions & V.A.G Guide】KINGBOLEN K8 pro bluetooth obd2 scanner covers almost all common services including Oil Reset, EPB, SAS, BMS Reset, ABS bleed, Throttle Reset, Suspension, Injector Code, Power Balance, Transmission Adaptation, Fuel Trim Learn, HVAC Control Module Calibrate, Language Change, A/F Settings, Stop/Start Reset, Crankshaft Sensor Relearn, TPMS, PMI function and etc. Imagine how much money and time you spend on car maintenance every year? K8 pro car scanner will be a good helper and saver for your car. V.A.G Guided function provides step-by-step guide to work for VolkswageneBay logo/AudieBay logo/Skoda. Note: Please send us model/year/vin to check compatibility before order
  • 【Powerful Bidirectional Test/Active Test & ECU Code】As a bidirectional scan tool, KINGBOLEN K8 pro allows you to request information from a vehicle's ECU or send commands to the vehicle's modules to perform specific tests and functions, such as EVAP Tests, Turn on/off radiator fan, Window/Mirror/Door Lock Test, Pump and Value Tests, Sound horn Test, et. Without using the vehicle control system and dismantling car’s parts, it can quickly and accurately pinpoint the fault causes, simple operation saves time and money
  • 【Wireless OE-Level All Systems Diagnostics】Equipped with Bluetooth VCI, you can do car diagnostics out of the car (up to 33F/10M) without being confined to a small space inside the car. Provides the convenience of Auto VIN, K8 pro allowing for easy access and diagnosis of all available modules on a wide range of vehicles, like PCM, ECM, BCM, TPMS, SAS, Fuel System, etc, to perform read/clear codes, view live data, freeze frame, perform active tests, and read ECU info... 12-In-1 Data Stream Graphics make data viewing more intuitive.Diagnostic reports can be shared via QR Code, Bluetooth or email.Built-in Browser and Fault Code Library allows you directly query the fault code when diagnosing

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


This product presentation was made with AAWP plugin.

Share to...