NHTSA ID Number: 10199620
Manufacturer Communication Number: 0303-16
TSB/Document Date: 2021-08-02
Summary
Hydrocarbon Doser Coolant Lines.
03 03-16
1
03 03-16
SUBJECT
DATE
Hydrocarbon Doser Coolant Lines
March 2016
Additions, Revisions, or Updates
Publication Number / Title
Platform
Section Title
Change
Removal of the
Hydrocarbon Doser
Coolant Lines - DD13
and DD15AT
DDC-SVC-MAN-0083
DD Platform
Installation of the
Hydrocarbon Doser
Coolant Lines - DD13
and DD15AT
Removal of the
Hydrocarbon Doser
Coolant Lines - DD15TC
and DD16
New procedures.
Installation of the
Hydrocarbon Doser
Coolant Lines - DD15TC
and DD16
All information subject to change without notice.
03 03-16
Copyright © 2016 DETROIT DIESEL CORPORATION
3
2 Removal of the Hydrocarbon Doser Coolant Lines - DD13 and DD15AT
2
Removal of the Hydrocarbon Doser Coolant Lines - DD13 and DD15AT
Remove as follows:
WARNING: PERSONAL INJURY
To avoid injury from hot surfaces, wear protective gloves, or allow engine to cool before removing
any component.
1. Shut off the engine, apply the parking brake, chock the wheels, and perform any other applicable safety steps.
CAUTION: ELECTRICAL SHOCK
To avoid injury from electrical shock, use care when connecting battery cables. The magnetic
switch studs are at battery voltage.
2.
3.
4.
5.
6.
7.
8.
9.
Disconnect the batteries. Refer to Original Equipment Manufacturer (OEM) procedures.
Open the hood.
If necessary, remove the front bumper. Refer to the OEM procedure.
If necessary, remove the splash shield. Refer to the OEM procedure.
Drain the engine coolant. Refer to section "Cooling System Drain Procedure".
Remove the air filter housing assembly.
Disconnect the Diesel Exhaust Fluid (DEF) header coolant line at the water manifold. Refer to the OEM procedure.
Remove and save the bolts (1) attaching the p-clips holding the coolant supply and return lines to the cylinder block.
NOTE: When removing the Hydrocarbon (HC) doser coolant lines, hold the water manifold HC doser coolant line
fitting with a separate wrench.
10. Remove the HC doser coolant inlet line from the HC fuel doser housing and the water manifold. Discard seal rings.
4
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 03 03-16
03 03-16
11. Remove the HC doser coolant outlet line from the HC fuel doser housing and the water manifold. Discard seal rings.
All information subject to change without notice.
03 03-16
Copyright © 2016 DETROIT DIESEL CORPORATION
5
3 Installation of the Hydrocarbon Doser Coolant Lines - DD13 and DD15AT
3
Installation of the Hydrocarbon Doser Coolant Lines - DD13 and
DD15AT
Install as follows:
NOTE: When installing the Hydrocarbon (HC) doser coolant lines, hold the water manifold HC doser coolant line
fitting with a separate wrench.
1. Install the HC doser coolant inlet and outlet lines to the water manifold assembly.
2. Torque the HC doser coolant inlet and outlet lines at the water manifold assembly.
• For the 5mm long thread fitting, torque to 15 N·m (11 lb·ft)
• For the 15mm long thread fitting, torque to 22 N·m (16 lb·ft)
3. With new seal rings, install the inlet and outlet coolant lines to the Hydrocarbon (HC) doser housing. Torque to 15 N·m
(11 lb·ft).
4. Install the bolts (1) attaching the p-clips holding the coolant supply and return lines to the cylinder block.
5. Torque the top two p-clip bolts to 30 N·m (22 lb·ft).
6. Torque the lower p-clip bolt closest to the HC fuel doser housing to 60 N·m (44 lb·ft).
7. Connect the Diesel Exhaust Fluid (DEF) header coolant line at the water manifold. Refer to the Original Equipment
Manufacturer (OEM) procedure.
8. Install the air filter. Refer to OEM procedures.
9. If removed, install the splash shield. Refer to the OEM procedure.
10. If removed, install the front bumper. Refer to the OEM procedure.
CAUTION: ELECTRICAL SHOCK
To avoid injury from electrical shock, use care when connecting battery cables. The magnetic
switch studs are at battery voltage.
11. Reconnect the batteries. Refer to OEM procedures.
6
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 03 03-16
03 03-16
12. Fill the cooling system. Refer to section "Cooling System Fill Procedure".
13. Close the hood.
All information subject to change without notice.
03 03-16
Copyright © 2016 DETROIT DIESEL CORPORATION
7
4 Removal of the Hydrocarbon Doser Coolant Lines - DD15TC and DD16
4
Removal of the Hydrocarbon Doser Coolant Lines - DD15TC and DD16
Remove as follows:
WARNING: PERSONAL INJURY
To avoid injury from hot surfaces, wear protective gloves, or allow engine to cool before removing
any component.
1. Shut off the engine, apply the parking brake, chock the wheels, and perform any other applicable safety steps.
CAUTION: ELECTRICAL SHOCK
To avoid injury from electrical shock, use care when connecting battery cables. The magnetic
switch studs are at battery voltage.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Disconnect the batteries. Refer to Original Equipment Manufacturer (OEM) procedures.
Open the hood.
If necessary, remove the front bumper. Refer to the OEM procedure.
If necessary, remove the splash shield. Refer to the OEM procedure.
Drain the engine coolant. Refer to section "Cooling System Drain Procedure".
Remove the air filter housing assembly.
Disconnect the Diesel Exhaust Fluid (DEF) header coolant line at the water manifold. Refer to the OEM procedure.
Remove the exhaust S-pipe. Refer to section "Removal of the DD15 and DD16 Exhaust S-pipe".
Remove and save the bolts (1) attaching the p-clips holding the coolant supply and return lines to the cylinder block.
NOTE: When removing the Hydrocarbon (HC) doser coolant lines, hold the water manifold HC doser coolant line
fitting with a separate wrench.
8
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 03 03-16
03 03-16
11. Remove the HC doser coolant inlet line from the water manifold.
12. Remove the HC doser coolant outlet line from the water manifold.
All information subject to change without notice.
03 03-16
Copyright © 2016 DETROIT DIESEL CORPORATION
9
5 Installation of the Hydrocarbon Doser Coolant Lines - DD15TC and DD16
5
Installation of the Hydrocarbon Doser Coolant Lines - DD15TC and
DD16
Install as follows:
NOTE: When installing the Hydrocarbon (HC) doser coolant lines, hold the water manifold HC doser coolant line
fitting with a separate wrench.
1. Install the HC doser coolant inlet and outlet lines to the water manifold assembly.
2. Torque the HC doser coolant inlet and outlet lines at the water manifold assembly.
• For the 5mm long thread fitting, torque to 15 N·m (11 lb·ft)
• For the 15mm long thread fitting, torque to 22 N·m (16 lb·ft)
3. Install the bolts (1) attaching the p-clips holding the coolant supply and return lines to the cylinder block. Torque the pclip bolts to 30 N·m (22 lb·ft).
4. Install the exhaust S-pipe. Refer to section "Installation of the DD15 and DD16 Exhaust S-pipe".
5. Connect the Diesel Exhaust Fluid (DEF) header coolant line at the water manifold. Refer to the Original Equipment
Manufacturer (OEM) procedure.
6. Install the air filter. Refer to OEM procedures.
7. If removed, install the splash shield. Refer to the OEM procedure.
8. If removed, install the front bumper. Refer to the OEM procedure.
CAUTION: ELECTRICAL SHOCK
To avoid injury from electrical shock, use care when connecting battery cables. The magnetic
switch studs are at battery voltage.
9. Reconnect the batteries. Refer to OEM procedures.
10. Fill the cooling system. Refer to section "Cooling System Fill Procedure".
11. Close the hood.
10
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 03 03-16
- Unsurpassed freeze protection and anti-boil performance...
- Organic acid technology resists rust, scale & corrosion...
- High-quality additives protect against leaks and won’t...
- Pre-mixed orange formula is ready-to-use in a 50/50 ratio...
- 5 year/150,000 mile guarantee protects against engine...
- Formulated to replace the OEM fluid in Asian make vehicles...
- 5 year/150, 000 mile . Silicate-free, long-life, phosphate...
- The long life formula provides protection for all cooling...
- Meets the following OEM and industry specifications: JIS K...
- Note: Please check the vehicle specification before...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 0303-16
Replacement Service Bulletin Number:
MFR Communication Date: 2016-03-03
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
/
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.