NHTSA ID Number: 10199425
Manufacturer Communication Number: A9121152063502_1
TSB/Document Date: 2021-08-04
Summary
This bulletin contains a software update that addresses DTC B200FF9 with various driver assist malfunction messages.
91 Driver assist systems various malfunctions (Intersection/side assist, ACC inop when towing, etc.), DTC
B200FF9
91 21 15 2063502/1 July 16, 2021.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A6, A6
allroad, S6,
RS 6, A7,
S7, RS 7,
A8, S8, A8
PHEV, Q7,
SQ7, Q8,
SQ8, RS
Q8, Audi
etron quattro,
and Audi
etron
Sportback
2020 - 2021
All
zFAS
A6 Avant,
RS 6 Avant,
and A7
PHEV
2021
All
zFAS
Condition
Customer states:
Lane change assist/Intersection assist:
The lane change assist/intersection assist is sporadically not working. One of the following messages is
displayed in the instrument cluster:
“Intersection assist: fault. Please contact service.”
“Side assist and exit warning system: fault. Please contact service.”
“Rear cross-traffic assist: fault. Please contact service.”
“Audi
pre sense: fault. Please contact service.”
Traffic sign recognition
The traffic sign based speed limit settings are not permanently stored and are lost with every ignition cycle.
Adaptive Cruise Assist
Vehicles with steel suspension: ACA disengages/loses calibration when towing a trailer/bike rack.
Workshop findings:
Page 1 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Lane change assist/Intersection assist:
The following DTC may be entered in the front corner radar control modules, J1088/J1089 (address words
00DB/00DC):
DTC B200FF9 (Internal malfunction) with symptom code 1311089.
And/Or
The following DTC may be entered in the lane change assist control modules J769/J770 (address words
003C/00CF):
DTC B200FF9 (Internal Malfunction) with one of the following symptoms codes 1311057, 1311058, 1311059,
and/ or 1311060.
Other
Other customer concern (see above) may not enter a DTC in the vehicle.
Technical Background
Multiple driver assist features have been optimized. This update will affect the following control modules:
Driver assist systems control module, J1121 (address word 00A5).
Adaptive cruise control
module, J428 (address word 0013).
Lane change assist control module, J769/J770 (address words 003C/00CF).
Front left/front right radar sensor control module for object detection, J1088/J1089 (address words
00DB/00DC).
Control module for laser distance control, J1122 (address word 00CD).
Airbag control module, J234 (address word 0015).
Production Solution
New software in production.
Page 2 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Service
Required equipment:
ODIS Tester.
SVM code.
Software update package on SD Card if required (see Required Parts and Tools or download the software
from MirrorServer using the SD Creator Program).
Time to complete update:
Approximately 60-120 minutes (includes 50 - 110 minutes for the software update and 10 minutes for the
SVM work).
Service work:
Note:
All outstanding campaigns must have been completed prior to running this update. Please familiarize
yourself with all steps of this update before proceeding.
1. Determine the driver assist systems control modules (zFAS), J1121 (address word 00A5) system designation
via ODIS (Figure 1):
Figure 1. zFAS system designation.
2. Select which SD Cards are required according to the system designation read in the prior step:
A. zFAS Var A: No SD Card is required.
Page 3 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
B. MY20 Audi
e-tron quattro and Audi
e-tron Sportback: zFAS Var B/C: SD Card P/N: 4N0906961AR is
required.
C. All other vehicles: zFAS Var B/C: USB-C drive P/N: 4N1906961 is required.
3.
Note:
Federal law requires the airbag’s Event Data Recorder (EDR) to be backed up prior to running the update in
this TSB (required only for MY20 Audi
e-tron quattro and Audi
e-tron Sportback, skip to Step 4 for all other
vehicles).
Please have the customer sign the declaration of consent available in the attachments of this TSB and
upload a picture/scan of it to DOC-IT.
In ODIS, run the test program “J234 – Technical Service Bulletin (TSB) 2061023” via “Choose self-test”
>> 0015 – Airbag – J234 >> 0015 – Technical Service Bulletin (TSB).
Make sure that the diagnostic session that includes the results from the aforementioned test plan is
uploaded to GFF Paperless.
4. Update the peripheral control modules using SVM code FASISKD5A001 (this update should take between
20 min and 30 min).
Customer information:
This update includes multiple control modules. Certain customer personalization settings might be reset
to factory settings by this update.
The dealership/workshop, Audi
of America and/or Audi
AG are not liable for third party modifications, like
undocumented retrofits, non-genuine accessories or any other modification not approved by Audi
of
America that might be rendered inoperable by this update.
5. Exit the flash context in ODIS. Otherwise, it will not be possible to execute the following steps.
6.
Tip: This step is not required for zFAS Var A!
If the vehicle has zFAS Var B/C installed, please insert the SD Card 4N0906961AR into the SD Card
reader (MY20 Audi
e-tron quattro and Audi
e-tron Sportback).
Or
Insert the USB-C drive 4N1906961 into an USB-C port (all other vehicles) in the vehicle.
For MY20 Audi
e-tron quattro and Audi
e-tron Sportback, please refer to TSB 2056558: 91 MIB2+
Software Update Instructions for further information.
All other vehicles, please refer to TSB 2060523: 91 MIB3 Software Update Instructions for further
information.
7. Update the zFAS application software using SVM Code FASISKD5A002 (this update should take about 30
minutes).
Page 4 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Note:
Always start the update out of ODIS. Please do not perform the update via the red engineering menu
(method 2) unless you have been given prior approval from TAC.
Step Vehicle
1
2
1
2
SD Creator Part
number
MY20 Audi
e-tron quattro
and Audi
e-tron Sportback
quattro, Audi
e-tron
Sportback
A6, A7, A8, Q7, Q8, MY21
Audi
e-tron quattro, and Audi![]()
e-tron Sportback
SVM code
---
FASISKD5A001
4N0906961AR
FASISKD5A002
---
FASISKD5A001
4N1906961
FASISKD5A002
8. Let the vehicle perform a bus sleep cycle:
Exit the flash context
Switch the vehicle’s ignition off
Remove the battery charger and diagnostic interface dongle from the vehicle.
Close the hood, trunk, all doors and lock the vehicle.
Wait approximately six minutes without handling the vehicle.
Warranty
Claim Type:
110 up to 48 Months/50,000 Miles.
G10 for CPO Covered Vehicles – Verify Owner.
If the vehicle is outside any warranty, this Technical Service Bulletin is
informational only.
Service Number:
9093
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max
200 TU)
Page 5 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Diagnostic Time:
Claim Comment:
GFF
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
0121 0004
10 TU
As per TSB #2063502/1
All warranty claims submitted for payment must be in accordance with the Audi
Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi
Warranty.
Required Parts and Tools
Model
SD Card
Quantity
MY20 Audi
e-tron
quattro and Audi
e-tron
Sportback quattro, Audi![]()
e-tron Sportback
4N0906961AR
01 (Shop tool)
A6, A7, A8, Q7, Q8,
MY21 Audi
e-tron
quattro, and Audi
e-tron
Sportback
4N1906961
01 (Shop tool)
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
TSB 2011732, 00 Software Version Management (SVM), operating instructions.
TSB 2056558, 91 MIB2+ Software Update Instructions.
TSB 2047812, 00 SD Creator: how to set up and use the SD Creator for obtaining vehicle software updates via
the MirrorServer.
TSB 2060523, 91 MIB3 Software Update Instructions.
TSB 2062601, 90 DTC U110100 is stored in the driver assistance systems control module.
All part and service references provided in this TSB (2063502) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2021 Audi
of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes
Page 6 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 7 of 7
© 2021 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A9121152063502_1
Replacement Service Bulletin Number:
MFR Communication Date: 2021-07-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Obd2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15 reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth obd2 scanner diagnostic tool ideal for diy's and private car owners
- Bidirectional Control for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping Diy users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15 Maintenance Resets: The current version introduces 15 popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford
, Toyota
, Chrysler
, Honda
, Mazda
, Nissan
, Mitsubishi
, Hyundai
, KIA
with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA
cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis.
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford
, Lincoln
, Mazda
, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA
AutoAuth - OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Lifetime Database & Software Updates— No Subscription Fee, No Feature Lock, Save you $399/Y】KINGBOLEN K8 Pro's software can already be permanently upgraded and used for while software of other same price product still needs annual fee of almost $400. K8 pro scanner has packed all capabilities auto technicians would ever need for repair & maintenance services: Added CAN-FD & DOIP protocol, Bluetooth Wireless Diagnosis, Bidirectional Test, ECU Online/Offline Code & Guided Functions for VW
, for Audi
...34+ Restes, Autoauth for FCA
SGW, Larger 4GB+64GB memory, 12600mAh battery, 8'' touch screen with 1280 * 800 Resolution. A Kickstand can allow the tablet to sit at a comfortable angle - 【Newly Added CAN FD & DOIP Protocol】As Upgrade Version of Kingbolen K8, K8 Pro obd2 scanner supports CANFD and DOIP protocol, which will save you 200+ bucks as no need extra buy for special adapter. CANFD protocol suits for the latest GM(2019-), reducing the risk of undetected errors. The DoIP protocol (comes with DoIp cable) fits for 2017+ BMW
(F&G chassis), for Jaguar
& Land Rover
after 2017, for Volvo
after 2018. Plus, K8 Pro's Memory from 2G+32G expanded to 4G+64G, update period extended from 2 years to permanent - 【34+ Hot Special Functions & V.A.G Guide】KINGBOLEN K8 pro bluetooth obd2 scanner covers almost all common services including Oil Reset, EPB, SAS, BMS Reset, ABS bleed, Throttle Reset, Suspension, Injector Code, Power Balance, Transmission Adaptation, Fuel Trim Learn, HVAC Control Module Calibrate, Language Change, A/F Settings, Stop/Start Reset, Crankshaft Sensor Relearn, TPMS, PMI function and etc. Imagine how much money and time you spend on car maintenance every year? K8 pro car scanner will be a good helper and saver for your car. V.A.G Guided function provides step-by-step guide to work for Volkswagen
/Audi
/Skoda. Note: Please send us model/year/vin to check compatibility before order - 【Powerful Bidirectional Test/Active Test & ECU Code】As a bidirectional scan tool, KINGBOLEN K8 pro allows you to request information from a vehicle's ECU or send commands to the vehicle's modules to perform specific tests and functions, such as EVAP Tests, Turn on/off radiator fan, Window/Mirror/Door Lock Test, Pump and Value Tests, Sound horn Test, et. Without using the vehicle control system and dismantling car’s parts, it can quickly and accurately pinpoint the fault causes, simple operation saves time and money
- 【Wireless OE-Level All Systems Diagnostics】Equipped with Bluetooth VCI, you can do car diagnostics out of the car (up to 33F/10M) without being confined to a small space inside the car. Provides the convenience of Auto VIN, K8 pro allowing for easy access and diagnosis of all available modules on a wide range of vehicles, like PCM, ECM, BCM, TPMS, SAS, Fuel System, etc, to perform read/clear codes, view live data, freeze frame, perform active tests, and read ECU info... 12-In-1 Data Stream Graphics make data viewing more intuitive.Diagnostic reports can be shared via QR Code, Bluetooth or email.Built-in Browser and Fault Code Library allows you directly query the fault code when diagnosing
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




