NHTSA ID Number: 10198899
Manufacturer Communication Number: B110321
TSB/Document Date: 2021-07-06
Summary
B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW
Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
SIB 11 03 21
B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND
TOOLS
2021-05-17
MODEL
F22 (2 Series Coupe)
F23 (2 Series
Convertible)
F34 (3 Series Gran
Turismo)
F30 (3 Series Sedan)
F32 (4 Series Coupe)
F36 (4 Series Gran
Coupe)
G01 (X3 Sports Activity
Vehicle (SAV))
G05 (X5 SAV)
G05 (X6 SAC
G07 (X7 SAV)
G12 (7 Series Sedan)
G14 (8 Series Coupe)
G15 (8 Series
Convertible)
G20 (3 Series Sedan)
G29 (Z4 Roadster)
G30 (5 Series Sedan)
G16 (8 Series Gran
Coupe)
G32 (6 Series Gran
Turismo)
F33 (4 Series
Convertible)
G02 (X4 Sports
Activity Coupe (SAC))
All B58 engine variants
SITUATION
A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oil
filter insert is now available.
This tool helps to significantly lessen the amount of engine oil spillage, reducing the corresponding
clean-up time and the amount of cleaning materials used.
B. On the rare occasions, when performing an engine oil service, the BMW Original (Genuine) engine oil
filter insert is either difficult to remove or it breaks apart in the oil filter housing.
For example, the filter paper is torn, and the
lower plastic section remains stuck inside the
engine oil filter housing (1).
PROCEDURE
Copyright ©2021 BMW of North America, Inc.
1/7
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
A. Use the following procedure in conjunction with the steps and precautions outlined in the Repair
Instruction 00 00 610 Engine Oil Service.
In all cases before removing the engine oil filter housing cap use the tool described in the
Service Bulletin.
1. Install special tool 83 30 5 A3B 354 BMW Oil
Catch onto the side of the oil filter housing.
Overview:
Oil catch cavity (1) will catch any engine oil
drippings as you remove the oil filter and
cap.
Thumb screw and spring (2) will keep tension
on the cable 93).
The lip seal (4) will ensure no oil leaks
between the special tool and the oil filter
housing.
This tool was sent to your center via the
Automatic Tool Shipment Program. Refer to
a SI B04 01 21 for additional details.
Each center received 1 tool per 3 technicians.
Additional tools can be purchased using P/N 83
30 5 A3B 354.
2. With the thumbscrew fully released (1), press
against the thumbscrew in the direction of the
arrow.
This will allow the tool and retaining cable (2)
to slip over the oil filter housing in the next
step.
3. Slide the tool over the oil filter housing and
align it to the oil filter housing.
Do not tighten the thumbscrew yet (1).
See the next steps to properly index the tool in
the proper location.
Copyright ©2021 BMW of North America, Inc.
2/7
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
4. Ensure the cable is positioned correctly on the
side of the oil filter housing (1).
For clarity, the tool is installed on an oil filter
housing removed from the vehicle in some
photos.
5. The oil filter housing has two small injection
molding seams on either side. The tool will align
with the seams and lock into place (1).
Tighten the thumbscrew gently (2).
6. Turn the oil filter housing cap two turns counterclockwise (loosen) and stop.
Copyright ©2021 BMW of North America, Inc.
3/7
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
7. Turn the oil filter housing cap two turns clockwise (tighten) and stop.
8. Slowly remove the oil filter housing cap and
the filter insert.
Regardless if the cap and filter are removed
together or separate the oil catch tool will
contain the drippings (1) in the cavity.
Photo shown with oil filter housing cap removed.
9. If the engine oil filter releases from the oil filter housing cap (the filter element is not broken). Use rubber
gloves or a shop towel to grab the oil filter. Turn the filter two turns counterclockwise (loosen) while pulling
outward.
10. Turn oil filter housing two turns clockwise (tighten) while pulling outward.
11. Try to remove the oil filter by pulling outward.
12. If the engine oil spills out of the oil filter
housing, then that residual engine oil will again be
caught by the oil catch (1).
Photo shown with oil filter housing cap and filter
removed.
Copyright ©2021 BMW of North America, Inc.
4/7
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
13. After reinstalling the new oil filter and oil filter, torque the oil filter cap to a repair instruction specification.
Gently remove the oil catch special tool. Place a shop towel underneath the oil catch tool to ensure all
drippings are contained while removing it.
Wipe the side of oil filter housing clean with a shop towel.
B. If the engine oil filter insert has broken apart inside the oil filter housing:
1. Replace the complete engine oil filter housing per the applicable repair instructions.
- Do not replace the heat exchanger
- Do not remove or try to clean the oil filter fragments from the engine oil filter housing
2. When the oil filter housing is removed from the engine,
- Allow time for the residual engine oil to drain into a suitable container before returning the part to the
WPRC
- Do not use any solvents on the oil filter housing
All parts will be collected and inspected by the WPRC
PARTS INFORMATION
For item B, obtain and confirm the part numbers for your specific vehicle by entering the chassis number in
either ETK or AIR which takes into account specific equipment and/or options.
Copyright ©2021 BMW of North America, Inc.
5/7
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
Part Number
Refer to ETK
Description
Oil filter housing complete (includes the oil filter insert)
Quantity
1
Refer to the ETK and the applicable repair instructions for one-time use fasteners and/or component
information regarding additional or replacement screws, gaskets, seals and fluids (drained) that need to be
installed/replaced and claimed.
WARRANTY INFORMATION
The the item B issue described in the Situation and Procedure sections is covered under the terms of the
BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Defect Code:
--Labor
Operation
11 42 520
1142003700
Main flow, oil filter loose
Description
Labor Allowance
Removing and installing/replacing full-flow oil filter
completely (in conjunction with either a
maintenance service or other repair that required
an engine oil and filter insert replacement) (Plus
work)
Refer to AIR
Refer to AIR for the corresponding flat rate unit (FRU) allowances.
BMW Maintenance Program
If the vehicle has an active maintenance program and the Engine oil Service task shows Recommended or
Due in the Service status field or it qualifies to be performed based on a Bundling Eligible procedure (BE),
then:
Perform the Engine oil Service task, and
Reset the CBS data, then
Submit and claim for the applicable engine oil part number and quantity under the BMW Maintenance
Program (Defect Code).
Do not claim for the oil filter insert, the replacement oil filter housing includes an new oil filter insert.
Sublet – Bulk Materials (RO and Claim Comments Required)
Sublet
Code 4
See the sublet
reimbursement
calculations
below
Reimbursement for the repair-related bulk materials, excluding the
engine oil (Do not use the BMW part numbers for claim submission)
Sublet reimbursement calculation for claiming the applicable repair-related bulk materials (BMW part
numbers) is at the center net price amount for the quantities used plus your center’s handling.
BMW Antifreeze/Coolant: Claim the corresponding sublet dollar amount for the quantity needed to replace
what was drained with a 50/50 coolant/water solution.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Copyright ©2021 BMW of North America, Inc.
6/7
6/3/2021
11 03 21_B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS
QUESTIONS REGARDING THIS BULLETIN
Technical inquiries
Warranty inquiries
Parts inquiries
Submit feedback at the top of this bulletin
Please contact the Warranty department by either using the Live Chat
that’s available in the Warranty Documentation Portal or through IDS by
selecting Coverage, Policy, Coding Questions and Mileage Corrections
Submit an IDS ticket to the Parts Department
Copyright ©2021 BMW of North America, Inc.
7/7
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B110321
Replacement Service Bulletin Number:
MFR Communication Date: 2021-05-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SEATS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.