NHTSA ID Number: 10197411
Manufacturer Communication Number: F10 Tehnical Sup
TSB/Document Date: 2021-06-14
Summary
Tehnical Suppurt Guide Gen 2.0 & 2.1 Micro SD Navigation (AVN) Gen 2.0 & 2.1 Display Audio (DA)
Turn ON the B/T function on your
device first. Check the device user
manual for information on this
procedure.
Did this solve the problem?
No
Yes
Try another Bluetooth device.
Can another Bluetooth device
be connected?
The problem was
solved.
No
Yes
Try pairing several time.
Yes
Can another Bluetooth
device be connected?
No
The Bluetooth device may be
the cause of the concern.
Replace the head unit.
48
Note :
Because of the nature of
Bluetooth, and the
differences in implementation across Bluetooth
device manufacturers,
sometimes it may take a
few attempts to complete
the initial pairing procedure.
2. Troubleshooting
REAR VIEW CAMERA WON’T DISPLAY (AVN)
Condition: Rear View video does not show or is distorted onscreen
Check the rear view camera
and re-connect.
And check the connectivity in
diagnostic mode.
If it is not restored, the rear
view camera needs to be
examined and/or replaced.
Rear view camera won't display
or shows lines and/or distortion
on screen when in reverse.
When the vehicle is in reverse,
does the Map screen change
to another screen?
Yes
No
Check the REV connectivity in
diagnostic mode.
When reverse gear is selected,
does REV show “ON”?
Note:
“UART” and “CAN” are not shown
for 86271FJ630
/730 and
86201FJ660/760
No
Check the reverse
harness or vehicle side
condition.
Yes
Set a tester before ACC is ON
and check CB+ at the head
unit right after ACC is ON. (5P
The rear view camera and harness between the head unit and
rear view camera needs to be
examined and/or replaced.
connector C CB+, #2 pin, output 6V)
Is it within specification?
Yes
No
Replace the head unit.
49
2. Troubleshooting
REAR VIEW CAMERA WON’T DISPLAY (DA)
Condition: Rear View video does not show or is distorted onscreen
Check the rear view camera
and re-connect.
And check the connectivity in
diagnostic mode.
If it is not restored, the rear
view camera needs to be
examined and/or replaced.
Rear view camera won't display
or shows lines and/or distortion
on screen when in reverse.
When the vehicle is in reverse,
does the Map screen change
to another screen?
Yes
No
Check the REV connectivity in
diagnostic mode.
When reverse gear is selected,
does REV show “ON”?
Note:
1. “UART” and “CAN” are not shown for
86271FJ630
/730 and 86201FJ660/760
2. “GPS” will indicate “NG” on non-Navigation
equipped Infotainment systems
No
Yes
Check the reverse
harness or vehicle side
condition.
Set a tester before ACC is ON
and check CB+ at the head
unit right after ACC is ON. (5P
The rear view camera and harness between the head unit and
rear view camera needs to be
examined and/or replaced.
connector C CB+, #2 pin, output 6V)
Is it within specification?
Yes
No
Replace the head unit.
50
2. Troubleshooting
STARLINK APP NOT WORKING
Check if smartphone meets
the specification below?
No
・iPhone: iOS 4.3.5 or later
・Android: Android 4.0 or later
Yes
Try it again with smartphone
which meets the speciation
for STARLINK App.
No
Is the power of smartphone ON?
Turn power on smartphone.
Yes
Is STARLINK application
installed to the smartphone?
No
Install STARLINK application to the smartphone and
try it again.
Yes
Please wait and try accessing the application later.
Condition:
- Displays error message (see pic 1)
- STARLINK App (application) stops
- Power of phone turns off while operating
STARLINK App
- Bluetooth disconnects while operating
STARLINK App
- Wireless data service is terminated while
operating STARLINK App
- No or Poor phone reception while operating
STARLINK App
Yes
Check to see if STARLINK APP
is working properly:
1. Press STARLINK App on the
smartphone.
2. Press Settings on the bottom
left of the screen (see pic 2)
Do you see a Server Busy/Error
Message (see pic 3)?
Pic 1
No
Check if the smartphone is connected to the unit via
Bluetooth.
No
Connect the phone to the
unit via Bluetooth.
Yes
Check if the smartphone is in
good phone reception area?
No
Move to the good phone
reception area and try it
again.
Yes
Try followings procedure.
1. Close and re-open STARLINK
application on the smartphone
2. Turn power off, and then turn
on the smartphone.
3. Delete STARLINK application
from the phone and reinstall the
STARLINK app.
Does the same condition occur?
No
The problem was solved.
Pic 2
Perform followings on the unit
Yes
1. Select APPS and STARLINK
2. While the error message is displayed on the screen, touch and hold
the lower right corner of the screen for
30 seconds.
3. Remove a finger from the screen
4. The screen will switch to "Radio" or
"Audio Source"
5. Try the STARLINK application
Does the same condition occur?
51
The problem was solved.
No
Replace the head unit.
Yes
Pic 3
2. Troubleshooting
STARLINK APPS SCREEN WILL NOT DISPLAY
Condition: After pressing STARLINK a white screen is displayed
Does time on the phone differ
more than 1 hour from your
local time?
Yes
Set time correctly on the
smartphone.
No
Is the connectivity ID number
written in the unit?
No
Note:
Refer to P.24 for the procedure
to check the connectivity ID
number.
Replace the head unit.
Yes
Is the smartphone connected
to the unit via Bluetooth?
No
Connect the phone to the
unit via Bluetooth.
No
Move to the good phone
reception area and try it
again.
Yes
Check if the smartphone is in
good phone reception area?
Yes
Try followings procedure.
1. Close and re-open STARLINK application on the
smartphone
2. Turn power off, and then
turn on the smartphone.
3. Delete STARLINK application from the phone and
reinstall the STARLINK app.
Does the same condition
occur?
No
The problem was solved.
Replace the head unit.
Yes
52
2. Troubleshooting
STARLINK DISPLAYS NO IMAGES
Condition: After pressing STARLINK, images are not shown.
Perform followings on the unit.
No
1. Select APPS and STARLINK.
2. While the error message is
displayed on the screen, touch
and hold the lower right corner
of the screen for 30 seconds.
3. Remove a finger from the
screen.
4. The screen will switch to
"Radio" or "Audio Source"
5. Try the STARLINK
Application.
The problem was solved.
Does the same condition
occur?
Yes
Replace the head unit.
No
The problem was solved.
Does the same
condition occur?
Yes
Contact Clarion USA.
53
2. Troubleshooting
MIRRORLINK APP DOES NOT WORK
Condition: Mirrorlink App is grayed out
Is the smartphone compatible
with mirrorlink? (OM p 141)
No
Please try mirrorlink with a
compatible phone.
Yes
Is the drivelink or carmode
app downloaded on the
smartphone?
No
Please download the correct
app and try again.
No
Connect the smartphone to
the USB port of the vehicle
and try again.
No
Please refer to USB No
Sound section.
No
The problem was solved.
Yes
Is the smartphone connected
to the unit via USB connection?
Yes
Test vehicle USB port by
inserting a USB drive with
Mp3 music.
Does the Music play through
the USB port?
Yes
Replace the USB cable from
the smartphone to the vehicle
USB port with a known good
cable.
Does the condition still occur?
Yes
Replace the head unit.
54
2. Troubleshooting
aha RADIO - Caution Message
Caution Message:
Please make sure the aha app is
running on your mobile device.
Symptoms:
•
•
aha application shuts down by itself.
Unable to enter aha Mode.
Is the latest aha application
properly installed on
Smartphone?
Reinstall the latest aha
application on
Smartphone.
No / Unknown
Yes
1. Power OFF and ON the
Smartphone.
2. Close all background
apps including aha.
3. Reopen the aha app.
4.
iPhone: Disconnect USB
cable from the vehicle USB
port and reconnect.
Android: Disconnect Bluetooth connection with the
head unit and reconnect.
Yes
The problem was
solved.
Is the problem fixed?
No
No
Replace the head unit.
55
2. Troubleshooting
aha RADIO - Caution Message
Caution Message:
Please update your aha
application.
Symptom:
Unable to enter aha Mode.
Is the latest aha application
properly installed on
Smartphone?
Reinstall the latest aha
application on
Smartphone.
No / Unknown
Yes
1. Power OFF and ON the
Smartphone
2. Close all background apps
including aha.
3. Reopen the aha app.
4.
iPhone: Disconnect USB cable
from the vehicle USB port and
reconnect.
Android: Disconnect Bluetooth
connection with the head unit
and reconnect.
Yes
The problem was
solved.
Is the problem fixed?
No
Contact SOA.
56
2. Troubleshooting
aha RADIO - Caution Message
Caution Message:
Please reconnect mobile
device.
Symptom:
Unable to enter aha Mode on the head unit.
1. Power OFF and ON the
Smartphone.
2. Close all background apps
including aha.
3. Reopen the aha app.
4.
iPhone: Disconnect USB cable from the vehicle USB port
and reconnect.
Android: Disconnect Bluetooth connection with the head
unit and reconnect.
Yes
The problem was
solved.
Is the problem fixed?
No
Replace the head unit.
57
2. Troubleshooting
aha RADIO - Caution Message
Caution Message:
Poor wireless reception.
Symptoms:
•
•
Programs are not played on the head unit.
Images are not shown on the head unit.
Move vehicle to an area where
Smartphone has better 3G,
4G, or Wi-Fi data coverage /
reception.
Is the problem fixed?
Yes
No
Due to aha server congestion/
maintenance, data may not be
available.
Please try again later.
Is the problem fixed?
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: F10 Tehnical Sup
Replacement Service Bulletin Number:
MFR Communication Date: 2015-10-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




