NHTSA ID Number: 10192996
Manufacturer Communication Number: Circular24FXREV1
TSB/Document Date: 2021-06-03
Summary
In the event of a catalytic converter failure, which could negatively impact tailpipe emissions, existing diagnostics may not properly illuminate the check engine light (MIL) due an error identified with Rear O2 Sensor monitoring. Additionally, under certain conditions, the engine may stall at low speeds (such as while the vehicle is slowing down or coming to a stop), or when the vehicle is already at a stop with the engine running. Updated work instructions in the event a start/stop error appears in the instrument cluster.
Emissions Service Action
Code: 24FX
Subject
Release Date
REVISION SUMMARY
Affected Vehicles
REVISION
Engine Control Module (ECM) Software
May 06, 2021
Updated work instructions in the event a start/stop error appears in the instrument
cluster
Country
USA
USA
CAN
CAN
Beginning
Model Year
2019
2019
2019
2019
Ending
Model Year
2021
2021
2021
2021
Vehicle
Vehicle Count
GOLF GTI
JETTA GLI
GOLF GTI
JETTA GLI
23,590
16,820
4,490
2,274
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
Problem Description
Corrective Action
Code Visibility
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
In the event of a catalytic converter failure, which could negatively impact tailpipe emissions,
existing diagnostics may not properly illuminate the check engine light (MIL) due an error
identified with Rear O2 Sensor monitoring. Additionally, under certain conditions, the engine
may stall at low speeds (such as while the vehicle is slowing down or coming to a stop), or when
the vehicle is already at a stop with the engine running.
Update Engine Control module (ECM) software.
On or about March 12, 2021, the campaign code was to affected vehicles.
Owner Notification
Owner notification took place in March 2021. Owner letter examples are included in this bulletin
for your reference.
Emissions Campaigns
Requirements
(CALIFORNIA ONLY)
The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.vwhub.com.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2021 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2021
Form No. F_3.4_AHQ-GQO-CP-C_049 Rev 5.0
24FX Page 1 of 12
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the ELSA screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option.
Canada dealers: Upload the repair order [signed by customer] to Volkswagen
WIN/Operations/Campaign
Closure.
Service Number
24FX
Damage Code
0099
Parts Vendor Code
Claim Type
WWO
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Mark labor causal
Do not claim wash/loaner under this action
U.S.A.: Loaner/rental coverage cannot be claimed under this action. However,
loaner/rental may be covered under the Alternate Transportation Program. Please refer
to the Volkswagen
Warranty Policy and Procedures Manual for loaner claims
information and reimbursement details.
Canada: Loaner/rental coverage cannot be claimed under this action. Please refer to t
Volkswagen
Service Loaner Program to determine loaner eligibility.
Criteria I.D.
X1 or X2
LABOR
Labor Op
Time Units
Description
2706 89 50
10
Connect battery charger
2470 25 99
Time stated on
diagnostic protocol
(up to 40 TU)
Update engine control module software
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2021 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2021
24FX Page 2 of 12
Customer Letter Example (USA)
This notice applies to your vehicle: ,
Subject: Emissions Service Action 24FX – Engine Control Module (ECM) Software
Dear Volkswagen
Owner,
In cooperation with the United States Environmental Protection Agency and the California Air Resources Board, we are
informing you of our decision to conduct an emissions service action on certain 2019-2021 model year Volkswagen
vehicles.
Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
In the event of a catalytic converter failure, which could negatively impact tailpipe emissions,
existing diagnostics may not properly illuminate the check engine light (MIL) due an error
identified with Rear O2 Sensor monitoring. Additionally, under certain conditions, the engine
may stall at low speeds (such as while the vehicle is slowing down or coming to a stop), or
when the vehicle is already at a stop with the engine running.
What will we do?
Your authorized Volkswagen
dealer will provide an ECM software update in order to address
an error identified with Rear O2 Sensor monitoring. Additionally, this software includes
additional diagnostic improvements, and will also improve vehicle drivability. This work will take
about an hour to complete and will be performed for you free of charge. Please keep in mind
that your dealer may need additional time for the preparation of the repair, as well as to
accommodate their daily workshop schedule.
IMPORTANT! Please note that if the ECM in your vehicle has been “chipped,” “tuned,”
or otherwise modified from original factory specifications with aftermarket components
and/or software, work needed to repair, replace, or return the ECM to original factory
specifications is NOT covered under this action.
What should you do?
Please contact your authorized Volkswagen
dealer as soon as possible to schedule this
service. To set up an appointment online, please visit www.vw.com/find-a-dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please forward
this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you
have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner
Reply card and mail it to us so we can update our records.
Important information for
California Vehicle Owners
– California Regulations
California regulations require that this campaign be completed prior to the time you renew your
vehicle registration. Therefore, please make sure that this campaign is completed prior to
the renewal of your vehicle registration, and that you furnish proof of completion to the
Department of Motor Vehicles (DMV) in the form of a copy of the dealer’s repair order, including
a signed “Proof of Correction” certificate. You obtain this from your dealer after the campaign
has been completed. Please retain the signed “Proof of Correction Certificate” with your vehicle
records. DO NOT MAIL THIS FORM to the DMV, unless requested.
Can we assist you
further?
If your authorized Volkswagen
dealer fails or is unable to complete this work free of charge
within a reasonable time, or if you should have any questions about this communication, please
don’t hesitate to contact Customer CARE, Monday through Friday by phone at 800-893-5298.
You are also welcome to e-mail or chat through the “Contact Us” page
http://www.vw.com/contact/.
Checking your vehicle for
open Recalls and Service
Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign,
please visit www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN)
into the Recall/Service Campaign Lookup tool.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Volkswagen
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2021 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2021
24FX Page 3 of 12
Customer Letter Example (CANADA)
This notice applies to your vehicle: ,
Subject:
Emissions Service Action 24FX – Engine Control Module (ECM) Software
Dear Volkswagen
Owner,
This notice is sent to you in accordance with the requirements of the Canadian Environmental Protection Act,
1999. Volkswagen
has determined that a defect, which relates to a prescribed emission standard, exists in certain
2019-2021 model year Volkswagen
vehicles. Our records show that you are the owner of a vehicle affected by
this action.
What is the issue?
In the event of a catalytic converter failure, which could negatively impact tailpipe
emissions, existing diagnostics may not properly illuminate the check engine light
(MIL) due an error identified with Rear O2 Sensor monitoring. Additionally, under
certain conditions, the engine may stall at low speeds (such as while the vehicle is
slowing down or coming to a stop), or when the vehicle is already at a stop with
the engine running.
What will we do?
Your authorized Volkswagen
dealer will provide an ECM software update in order
to address an error identified with Rear O2 Sensor monitoring. Additionally, this
software includes additional diagnostic improvements, and will also improve
vehicle drivability. This work will take about an hour to complete and will be
performed for you free of charge. Please keep in mind that your dealer may need
additional time for the preparation of the repair, as well as to accommodate their
daily workshop schedule.
IMPORTANT! Please note that if the ECM in your vehicle has been “chipped,”
“tuned,” or otherwise modified from original factory specifications with
aftermarket components and/or software, work needed to repair, replace, or
return the ECM to original factory specifications is NOT covered under this
action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized
Volkswagen
dealer as soon as possible to schedule this service. On or about
March 12, 2021 the necessary repair instructions and parts will be available to your
authorized Volkswagen
dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action,
please forward this letter immediately via first-class mail to the lessee within ten
(10) days of receipt. If you have changed your address or sold the vehicle, please
fill out the enclosed prepaid Owner Reply card and mail it to us so we can update
our records.
Can we assist you
further?
If your authorized Volkswagen
dealer fails or is unable to complete this work free
of charge within a reasonable time, please contact Customer Relations, Monday
through Friday from 8AM to 8PM EST by phone at 1-800-822-8987 or via our
“Contact Us” page at www.vw.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure
your vehicle continues to meet and exceed your expectations.
Sincerely,
Volkswagen
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2021 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2021
24FX Page 4 of 12
Required Tools
Battery Tester/Charger
Diagnostic Tester
- GRX3000VAS-
-VAS6150X/VAS6160X-
(or equivalent)
(or equivalent)
Repair Instruction
Section A - Check for Previous Repair
TIP
If Campaign Completion label is present, no further work is required.
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a
copy with the repair order.
Confirm the Campaign/Action is open . If the status is closed, no further work is
required.
Note the Applicable Criteria ID for
use in determining the correct work to be done
and corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are
open, they must be performed in order of the Start
date . The oldest should be performed
first.
All Safety Recalls must be completed prior
to completing this campaign.
Proceed to Section B.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2021 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2021
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular24FXREV1
Replacement Service Bulletin Number:
MFR Communication Date: 2021-05-06
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA
AutoAuth access for Chrysler
, Jeep
, Dodge
, and Fiat
(2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA
AutoAuth account is not included with the device. Users must register and pay separately through the official FCA
AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA
Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford
, for GM, for Toyota
, for Honda
, for Nissan
,for Hyundai
etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA
AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler
, for Dodge
, for Jeep
, for Fiat
models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




