Classification:

Reference:

TF15-001

Date:

NTB15-021

March 17, 2015

2013 – 2014 PATHFINDER
4WD ERROR DISPLAYED AND DTC C1204 STORED
APPLIED VEHICLES:

2013 – 2014 Pathfinder (R52)
2014 Pathfinder Hybrid (R52)

APPLIED VIN / DATE:

Equipped with 4WD

Built before 5N1(*)R2M(**)EC 721752 / August 5, 2014

IF YOU CONFIRM
The vehicle has been operated in cold
weather, below approximately -18ºC (0ºF),
and
4WD ERROR is displayed in the Vehicle
Information Display.
and
DTC C1204 (4WD Solenoid) is stored.

Figure 1

ACTION
Replace the 4WD Control Unit with the one listed in the Parts Information of this bulletin.


Refer to the Electronic Service Manual (ESM), section DLN-Driveline, for
replacement information.

Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2

SERVICE PROCEDURE
Replace the 4WD Control Unit with the one listed in the Parts Information below (see
Figure 2).


Refer to the Electronic Service Manual (ESM), section DLN-Driveline, for
replacement information.

4WD Control
Unit

A: Rear storage area,
rear panel near the
rear door latch
Figure 2

PARTS INFORMATION
DESCRIPTION
Controller Assy - Torque Split
(4WD Control Unit)

P/N

QUANTITY

41650 – 9PB5A

1

CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace Torque Split
41650 – 9PB5A
RS36AA
ZE
32
(1)
Control Unit
(1) Reference the current Nissan Warranty Flat Rate Manual and use the indicated flat rate
time.

2/2

NTB15-021