NHTSA ID Number: 10192430
Manufacturer Communication Number: NTB14082
TSB/Document Date: 2021-05-10
Summary
INTRODUCTION Nissan is conducting a Voluntary Service Campaign on certain Model Year 2014 Rogue vehicles. On affected vehicles, the engine on/off push button will be replaced at no charge for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC311 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign. See this bulletin for further detail.
Reference:
Date:
NTB14-082
August 28, 2014
VOLUNTARY SERVICE CAMPAIGN
2014 ROGUE ENGINE ON/OFF PUSH BUTTON
CAMPAIGN I.D.: PC311
APPLIED VEHICLE: 2014 Rogue (T32)
Check Service COMM to confirm campaign eligibility.
INTRODUCTION
Nissan
is conducting a Voluntary Service Campaign on certain Model Year 2014 Rogue
vehicles. On affected vehicles, the engine on/off push button will be replaced at no charge
for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification number PC311 to this campaign. This number must
appear on all communications and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to correct each vehicle falling within the range of this campaign that enters the
service department. This includes vehicles purchased from private parties or presented by
transient (tourist) owners and vehicles in a dealer’s inventory.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians
are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/6
SERVICE PROCEDURE
IMPORTANT: Follow all cautions,
warnings, and notes in the Electronic
Service Manual (ESM) when working
on or near a Supplemental Restraint
System (SRS), such as an airbag.
Check Service COMM to confirm vehicle eligibility.
NOTES:
Turn the engine on/off push button OFF before starting repairs.
Place clean protective covering over the center console and as needed.
1. Remove the front air control.
Grasp the front air control from underneath, and then pull out and up (see Figure 1).
Refer to Figure 2 for fastener locations.
Front air control
Figure 1
Figure 2
2/6
NTB14-082
2. Remove instrument finisher B as shown in Figure 3.
Refer to Figure 4 for fastener locations.
Instrument
finisher B
Figure 3
Figure 4
3/6
NTB14-082
3. Disconnect the the electrical connections at the engine on/off push button and
NATS antenna amp.
Connectors
Figure 5
4. Remove the engine on/off push button:
a. Press on the face (button) side of the engine on/off push button while prying
outward on each of the three (3) clips.
b. The engine on/off push button should come out the back side of the instrument
finisher B after the third clip is released.
1) Press on front
2) Pry on
these clips
Figure 6
5. Snap in place the new engine on/off push button in the opposite direction it came out.
6. Reassemble the vehicle in reverse order of disassembly.
4/6
NTB14-082
PARTS INFORMATION
Description
PART #
Quantity
SWITCH ASSY - IGNITION
25150-4BJ0A
1
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the following claims coding:
CAMPAIGN ID #
DESCRIPTION
OP CODE
FRT
PC311
Replace Engine On/Off Push Button
PC3110
0.2 hrs
5/6
NTB14-082
OWNER’S LETTER
Dear Nissan
Rogue Owner:
Nissan is committed to providing the highest levels of product safety, quality
and customer satisfaction. With that in mind, we want to bring to your attention
important information regarding a voluntary service campaign being conducted
by Nissan
to replace the engine on/off push button in your vehicle.
REASON FOR SERVICE CAMPAIGN
The engine on/off push button in your vehicle may have been damaged during
the manufacturing process. The issue does not affect normal starting or regular
operation of the vehicle. However, in rare instances, this may cause difficulty in
shutting off the engine.
WHAT NISSAN WILL DO
To assure your continued satisfaction and confidence in your vehicle, Nissan will
replace the engine on/off push button with a new one at an authorized Nissan![]()
dealer at no charge to you for parts or labor. The service could take up to 1
hour to complete, but your Nissan dealer may require your vehicle for a longer
period of time based upon their work schedule.
WHAT YOU SHOULD DO
Nissan encourages you to contact your Nissan dealer at your earliest
convenience in order to arrange an appointment.
To minimize any inconvenience to you, it is important that you have an
appointment before bringing your vehicle to the Nissan dealer for
service. Please bring this notice with you when you keep your service
appointment. Instructions have been sent to your Nissan
dealer.
If you have additional questions you may contact the National Consumer Affairs
Department, Nissan North America, Inc., P.O. Box 685003, Franklin, TN 370685003. The toll free number is 1-800-NISSAN1 (1-800-647-7261).
Thank you for providing us an opportunity to ensure on-going satisfaction with
your Nissan vehicle.
6/6
NTB14-082
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB14082
Replacement Service Bulletin Number:
MFR Communication Date: 2014-08-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




