971.807.986.E OK1

1x

Support piece for vane (right)  Figure 5 -10-

971.807.985.E OK1

1x

Support piece for vane (left)  Figure 5 -11-

———

1x

ACC trim, left (8T3/3V1, left)  Figure 5 -12-

———

1x

Side vane (left)  Figure 5 -13-

———

1x

Side vane (right)  Figure 5 -14-

———

1x

Grille (right), prime-coated  Figure 5 -15-

971.807.486.C OK1

1x

Insert piece for trim (8T1, right)  Figure 5 -16-

Tequipment

Installation and Conversion Instructions

Panamera (971)
17/20

ENU

6699

971.807.485.C OK1

1x

Insert piece for trim (8T1, left)  Figure 5 -17-

971.807.486.D OK1

1x

Insert piece for trim, ACC (3V1/8T3, right)  Figure 5 -18-

971.807.997.B

1x

Camera holder  Figure 5 -19-

971.807.986.F OK1

1x

Support for ACC vane (8T3/3V1, right)  Figure 5 -20-

971.807.485.D OK1

1x

Insert piece for trim, ACC (3V1/8T3, left)  Figure 5 -21-

———

1x

Camera cover, (8A4), prime-coated  Figure 5 -22-

———

1x

Vane (C blade, left), prime-coated  Figure 5 -23-

———

1x

Decorative insert (right), prime-coated  Figure 5 -24-

———

1x

ACC trim (8T3/3V1, right)  Figure 5 -25-

———

1x

Center grille, prime-coated (7X2/7X8/9R0), (not shown)

———

1x

Center grille, prime-coated, (7X2/7X8/9R1), (not shown)

3

6

ONLY included in respective enhancement package!

Information
ONLY in the event of repairs/replacement:
Items WITHOUT a part number in the parts list can be found/ordered from the Porsche Electronic Parts
Catalog = PET.
Check model year and vehicle equipment (I-no.) in the standard catalog!

Materials:

Tools:

———

——

Cleaning cloth (commercially available)

———

——

Isopropanol (commercially available)

000.043.300.49

——

Activator

9900 - PIWIS Tester 3
T10118 - Assembly tool
VAS 6937 Adjusting gauge
Polyoxymethylene wedge (POM wedge, commercially available)
Soft-faced hammer (commercially available)
Stanley knife (commercially available)
Flashlight

Tequipment

Apr 29, 2021
Page 7 of 29

6

Panamera (971)
6699

Installing:

ENU

1

Installation and Conversion Instructions

17/20

Preparatory work

CAUTION
Painting components
•

Risk of warping of components

•

Risk of damage to components



Observe the guidelines and instructions for painting components in the "Paint" Workshop
Manual.



Always place parts without tension on the painting devices provided during painting and drying
processes.
1.1

Apr 29, 2021
Page 8 of 29

Paint all prime-coated parts to match the vehicle’s color code in accordance with instructions
in the Paint Workshop Manual.
1.1.1

Paint the following parts in exterior color:
Front part of front apron, front spoiler, number plate carrier, towing lug cover,
headlight cleaning system cover, rear skirt, parking sensors and sill covers

1.1.2

Paint the following parts in High-gloss Black (041) or Black Mattte (OK1):
Center grille, decorative insert at left/right, vane at left/right, ACC trim, vane
in center grille, vane (C blade) at left/right, RTV cover, grille at left/right, lower
diffuser

1.2

Disconnect the battery.  Workshop Manual '2X00IN Work instructions after disconnecting
the battery'

1.3

Raise the vehicle.  Workshop Manual '4X00IN Lifting the vehicle'

1.4

Remove front apron.  Workshop Manual '631519 Removing and installing front apron'

1.5

Remove rear apron.  Workshop Manual '635519 Removing and installing rear apron'.

1.6

ONLY for SportDesign side skirts (VR4):
Remove (standard) sill cover.  Workshop Manual '663119 Removing and installing door
entry guard'

Tequipment

Installation and Conversion Instructions

2

Panamera (971)
17/20

ENU

6699

6

Convert rear apron
Information
Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also
have to be performed on the opposite side of the vehicle as well. These must be carried out
as a mirror image of the steps shown.
2.1

Remove ParkAssist sensor ( Figure 6) from
rear skirt.  Workshop Manual '917519
Removing and installing ParkAssist sensor'
1
2
3
4
5
6
2.1.1
2.1.2

–
–
–
–
–
–

ParkAssist sensor
Clip
Clip (Keyless Entry)
Antenna
Antenna
VIP control unit
Unclip clip ( Figure 6 -2-) from
ParkAssist sensor holder.

Figure 6

ONLY for vehicles with Keyless Entry (4F2/4F6):
Unclip clip ( Figure 6 -3-) from VIP control unit holder.
Carefully detach antennas ( Figure 6 -4 and 5-) from rear skirt.
Unclip VIP control unit ( Figure 6 -6-) from holder.

2.2

Remove (standard) rear skirt.  Workshop Manual '636819 Removing and installing rear
skirt'

2.3

Remove speed nut ST4.8 (4 x) from
(standard) rear skirt and install it on the side
of the new (prime-coated) rear skirt ( Figure
7).
1

– Speed nut, ST4.8

Install new rear skirt on rear apron. 
Workshop Manual '636819 Removing and
installing rear skirt'
2.4

Complete the rear skirt
Figure 7

Tequipment

Apr 29, 2021
Page 9 of 29

6

Panamera (971)
6699

ENU

Installation and Conversion Instructions

17/20
2.4.1

Clip new trim frame for tailpipe
cover (at the left/right) into new rear
skirt ( Figure 8).  Workshop
Manual '637019 Removing and
installing trim frame for tailpipe
cover'
1

– Trim frame for tailpipe
cover (left)

Figure 8
2.4.2

Clip new center grille into the new
rear skirt ( Figure 9 -a-).
1
2

– Center grille
– Rear skirt

Check that the locking lugs on the
rear skirt ( Figure 9 -Arrows-)
are installed correctly in the center
grille.

Figure 9
2.5

Install new diffuser ( Figure 10).
1
2
3

2.6

Apr 29, 2021
Page 10 of 29

– Diffuser
– Center grille
– Rear skirt

2.5.1

First, clip diffuser into the center
grille ( Figure 10 -Arrows-).

2.5.2

Then, clip diffuser into the rear skirt
( Figure 10 -a-).

ONLY for vehicles with Keyless Entry
(4F2/4F6):
Install Virtual Pedal (VIP) holder.
2.6.1

Clean bonding surfaces to remove all dust and grease.

2.6.2

Pull protective film off VIP holder.

Tequipment

Figure 10

Installation and Conversion Instructions
2.6.3

Panamera (971)
17/20

ENU

6699

6

Position VIP holder on the guide
lug ( Figure 13 -Arrow-) on the
center grille and press it on firmly.
1
2

– Virtual Pedal (VIP) holder
– Center grille

Figure 11
2.6.4

Stick double-sided adhesive tape
on flat-band conductor (sensor 1)
and holder for coaxial conductor
(sensor 2) ( Figure 12).
1
2

– Flat-band conductor
(sensor 1)
– Holder for coaxial
conductor (sensor 2)

Figure 12

Tequipment

Apr 29, 2021
Page 11 of 29

6

Panamera (971)
6699

ENU

Installation and Conversion Instructions

17/20
2.6.5

Clip VIP control unit into VIP holder
( Figure 13 -top left-).
1
2
3
4
5

2.6.6

– Virtual Pedal (VIP) control
unit
– Clip
– Flat-band conductor
(sensor 1)
– Coaxial conductor (sensor
2)
– Holder for coaxial
conductor (sensor 2)

Clean bonding surfaces to remove
all dust and grease.
Install clip into VIP holder ( Figure
13 -top left-).

2.6.7

Install antenna, consisting of
Figure 13
flat-band conductor (sensor 1) and
coaxial conductor with holder (sensor 2) into the rear apron as follows:
•
•

3

Pull protective film off adhesive tape on the flat-band conductor (sensor 1 
Figure 13 -3-) and affix it underneath the center grille ( Figure 13 -bottom-).
Pull protective film off holder for coaxial conductor ( Figure 13 -5-) and affix
coaxial conductor firmly above the center grille ( Figure 13 -bottom-).

2.7

Install ParkAssist sensor in rear skirt.  Workshop Manual '917519 Removing and installing
ParkAssist sensor'

2.8

Install rear apron.  Workshop Manual '635519 Removing and installing rear apron'

Assemble new front apron
3.1

Install front spoiler on front apron
For the following work: See Information!
Information
Check fixing clips. They must not be bent or broken.
Make sure that all locking lugs have engaged correctly.
Check that they are installed correctly.

Apr 29, 2021
Page 12 of 29

Tequipment

Installation and Conversion Instructions
3.1.1

Panamera (971)
17/20

ENU

6699

6

Install front spoiler (lower part)
in the front apron with the help of
another person ( Figure 14).
1
2

– Front spoiler (lower part)
– Front apron

Figure 14
3.1.2

Also secure the front spoiler
(lower part) to the front apron with
U-clamps (6 x  Figure 15) in the
locking lug area (gap between