NHTSA ID Number: 10183705
Manufacturer Communication Number: 15-261-20R
TSB/Document Date: 2020-12-05
Summary
The following information announces reprogramming file availability and provides a software update installation procedure to optimize the Gen 4 Denso CP1 Audio and Navigation head units.
VCPU Version
High/Mid
F11GHV020-501
Available Version
Model
VCPU Version
Base
F11GHV020-501
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 9 of 21
4g) Once the update begins, the screen below will be displayed with a progress bar. It takes about 15
to 20 minutes for the update to complete.
VERY IMPORTANT: NEVER turn off the ignition while the software update is in process.
Base
High/Mid
4h) When the software update is complete, the following screen will be displayed (the actual software
version will be different).
Base
High/Mid
Press “OK”
Press “OK”
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 10 of 21
IMPORTANT NOTE:
On a rare occasions a “Software Update Incomplete” message may appear in this step which occurs due
to a bug in the software update procedure. Proceed to Step 4i below to confirm the software version
has been updated to the latest version.
For critical Service Bulletin helpful tips to prevent unnecessary hardware replacement, follow
the link to an important Subarunet message: https://www.subarunet.com/home/home.html#/
Announcement/83194.
4i) Select OK in the screen above then remove the H/U reprogramming USB from the USB port.
4j) Turn the Ignition OFF, open the driver’s door then close the driver’s door.
4k) Wait for 3 minutes, then turn the ignition ON.
4l) Access Dealership Mode following steps provided item 4b and using the tables below, confirm
the software update completed successfully.
NOTE: The new Software Version number must be entered when prompted at claim entry.
Software Version Table
Model
MSOC Version
Model
MSOC Version
High
F11GHM022-504
Base
F11GBM022-504
Mid
F11GMM022-504
Model
DSP Version
Model
DSP Version
Base
02.24.06
High/Mid
02.24.06
Model
VCPU Version
Model
MSOC Version
Base
F11GHV020-501
High/Mid
F11GHV020-501
4m) Turn the ignition OFF, open the driver’s door then close the driver’s door to complete the
procedure.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Gold plan, this repair may be submitted using the following claim information:
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 11 of 21
Labor Description
Labor
Operation #
Labor
Time
DENSO CP1- SOFTWARE VERSION CHECK ONLY
A031-178
0.2
DENSO CP1 SOFTWARE UPDATE-INCLUDES VERSION CHECK
A031-173
0.6
Fail Codes
ZTG-48 (BASE)
ZTS-48 (MID)
ZTH-48 (HIGH)
REMINDER: The new Software Version number must be entered when prompted at claim entry.
NOTE: Retailers are now permitted to claim up to $5.00 per claim in Sublet to help offset the cost
of replacement USB drives. Repeated re-formatting of the USB drives used for reprogramming
can compromise their ability to operate properly. Over time, hardware connections can loosen and
stored data files can become corrupted. Retailers are responsible for replacing any worn or otherwise
inoperable USB drives as needed. This compensation is intended to help defray those costs.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 12 of 21
“APPENDIX A”
Follow this procedure in the RARE case of “Software update setup is initializing…” message is displayed:
•
If the screen shown below appears, WAIT for approximately 15 minutes or as long as necessary
to allow the Software update setup initialization process to complete.
Base
High/Mid
•
The screens shown below will be displayed when the process completes.
Base
High/Mid
1. Turn the ignition OFF, open the driver’s door, close the driver’s door and WAIT for 3 or more
minutes before proceeding further.
2. Open the driver’s door again and either turn the ignition ON (if a charger is connected) or start the
engine.
3. Go to Dealership Mode menu again (PRESS and HOLD the RIGHT-side temperature control
buttons (both up and down) and press the Tune / Scroll knob 6 times then release all to display the
Dealership Mode) and select Software Update as in STEP 3 beginning on pg. 8.
IMPORTANT NOTE: If this procedure is required, contact Techline as additional action may be
necessary.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 13 of 21
“APPENDIX B”
Denso Gen 4 Software Update Timeline (TSB Number: 15-261-20)
Update #
Version
Release
Date:
0
0
9/1/2019
F11GHM020-501/502 (High model software) - Start of Production for 20MY Outback/Legacy
F11GMM020-501/502 (Mid model software)
F11GBM020-501/502 (Base model software)
1
RC1912
2/24/2020
F11GHM021-503 (High model software)
F11GMM021-503 (Mid model software)
F11GBM0021-503 (Base model software)
- See “Conditions Addressed by Update #1” as outlined in
“Appendix C” below.
2
RC2003
6/24/2020
F11GHM022-504 (High model software)
F11GMM022-504 (Mid model software)
F11GBM022-504 (Base model software)
See “Conditions Addressed by Update #2” as outlined in
“Appendix C” below.
NEW Software Version ID #:
Conditions Addressed:
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 14 of 21
“APPENDIX C”
Conditions Addressed By Update #1:
Symptom # Description of Symptom:
1
The CP1 display and/or center Combination Meter display freezes.
No response from touch screen or voice guidance. After switching the ignition off
and opening the driver’s door, the system does not recover**.
Display Freezes
Touch Buttons Unresponsive
2
3
**NOTE: After switching the ignition off and leaving the driver’s door open more
than 70 seconds, the system may recover after switching the ignition back on.
Delayed response of rear view camera guide lines.
When the rear view camera is activated and the steering wheel is turned, there is a
delay before the steering-responsive guide lines respond to the steering wheel input.
Fuel consumption display has unnecessary ‘Φ’ mark when changing mileage unit to
Km.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 15 of 21
Symptom # Description of Symptom:
4
Diagnostics Recorder Data cannot be exported to the USB memory device. When
the diagnostic log data is being downloaded (by selecting: Dealership Menu >
Diagnostics Recorder > Export Data to USB), it fails after the progress bar reaches
almost 90% with an error message of Export failed. Please try again.
Export Failed. Please Try Again.
5
When using Voice Recognition to search for a ‘Nearby POI’ (Point of Interest) in
Canada with FRENCH language selected, the CP1 display turns black and displays a
Caution / disclaimer message.
Voice Recognition
Black Screen
Caution / Disclaimer Message
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 16 of 21
Symptoms Addressed By Update #2:
Symptom # Description of Symptom:
1
Several minutes after Engine start, the Center Information Display (CID) reboots.
2
After an extended period of usage, some white blinking dots appear on the display.
White Blinking Dots
3
4
5
6
7
8
The display screen freezes or becomes blank (black screen) after a CD is inserted.
This symptom occurs when a CD with over 99 characters of Artist Name Data is used.
CID reboots.
In a case where the system was shut down with SXM selected as the audio source, the
CID reboots after the next start up.
SXM does not resume playing instantly.
In a case where the system was shut down with SXM selected as the audio source, SXM
takes more than 20 seconds to resume play after the opening screen is displayed (when it
normally only takes approximately 5 seconds.)
Radio station does not resume playing (no audio output).
In a case where the system was shut down with Radio being selected as the audio
source, audio output does not resume at the next start up. Once the audio source is
changed to SXM, SXM plays normally but, if the source is changed back to the Radio,
audio does not return and the radio display is also lost.
Customer-selected Equalizer settings are lost. Equalizer returns to the default settings
after ignition switch is turned OFF and back ON.
The media source cannot be changed.
Even if or is selected, the media source does not change. In addition,
Voice Recognition stops functioning at the same time. This condition occurs when the
volume setting is continuously changed while the CID is booting.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 17 of 21
Symptom # Description of Symptom:
9
In a case where the system was shut down while the Navigation map screen was being
displayed, the display goes blank (black screen) soon after the Disclaimer screen is
displayed after restarting.
10
CID reboots repeatedly after setting a destination using the Navigation system.
11
CID reboots while using the Pandora application via CarPlay.
12
Bluetooth connection cannot be reestablished when using certain smart phones.
When using Android Auto on certain smartphones, a Bluetooth connection cannot be
reestablished automatically once it has been disconnected.
13
CarPlay connection cannot be established.
When connecting an iPhone via USB, ”CarPlay Unavailable” is displayed and CarPlay
does work.
14
The HOME screen goes blank.
When the screen is switched from Camera mode to HOME, no icons are displayed as
shown below.
List of New Functions and Enhancements Included in Update #2:
Number
1
2
New Functions and Improvements:
The previously selected customized map orientation setting is memorized even after
ignition OFF / ON. If the customer changes the map orientation setting, the change is
automatically retained.
Pin display of POI is now available.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 18 of 21
Number
3
New Functions and Improvements:
In the 2D and 3D HU display mode, the vehicle position icon on the Navigation map is
easier to identify:
• Icon size increased from 7mm to 9mm.
•
Icon color has been changed to Dark Blue.
•
Icon position (when using route guidance) stays at the same position as when
not using route guidance.
•
Icon has been re-positioned 9mm higher on the display.
4
The ISS (Auto Start Stop) button has been moved to the upper layer in the Car Setting
menu. By touching the “Car Setting” icon, the Auto Start Stop and Cruise Control
Acceleration Characteristics menus can be accessed immediately, whereas selecting
“Others” in the Car Setting screen was required to access these menus.
5
HVAC control buttons of base grade are now larger and easier to see.
6
Time zone and Summertime are now automatically selected.
Default setting of clock setting is Auto. The time zone is changed according to the
vehicle location, and Summertime is automatically set according to the calendar.
Clock setting can be selected by touching the clock display in the status bar.
AlbumArt is displayed when music is played and now continues to be displayed when
the vehicle is in motion.
7
8
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 19 of 21
Number
9
New Functions and Improvements:
CarPlay screen is now expanded from half size (horizontal) to full screen (vertical).
10
When using CarPlay or Android Auto, a “CarPlay” or “Android Auto” tab will now
appear on the Media tab bar. By selecting this tab, music data and metadata can be
browsed.
11
When using route guidance with CarPlay navigation, descriptions will
be displayed both in the Information bar of CID and in the MID located in the center of
the combination meter.
By touching the new CarPlay button located at the top of the CID, the CarPlay menu can
be accessed easily.
12
13
14
15
In a case where the system is shut down while is CarPlay connected, the system automatically resumes the connection at the next start up.
Voice Recognition function is ready to use faster than with previous version.
Gracenote Media Database updated to November 2019.
Continued...
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 20 of 21
Number
16
New Functions and Improvements:
1. Sirius XM Smart Favorites menu has been removed from SiriusXM Settings
2. Going forward first 10 set Sirius XM presets are now smart favorites by default
3. Smart favorite channel has “star” added to the preset button
Indicator Added
Bulletin Number: 15-261-20R; Revised: 11/20/20
Page 21 of 21
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-261-20R
Replacement Service Bulletin Number:
MFR Communication Date: 2020-11-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.