NHTSA ID Number: 10182843
Manufacturer Communication Number: HINO PA-2016-025
TSB/Document Date: 2020-11-23
Summary
Leading supplier of Audio Systems, Satellite Radio, Telematics, Tire Pressure Monitoring, Navigation, Video Systems,
convenience in a long haul or work truck application
55
Visit us at www.panapacific.com
Truck & Safety Components
Power Converter / Battery Charger Installation Kits
200W Power Inverter with USB Port
Cup-Holder Design
Part Number: CPI290CH
Product Features: 200 Watts continuous power -
45 amps Truck Approved Battery Charger to Batteries
Installation Kit
Part Number: CM4512
400 Watts peak power • Grounded AC outlet - Convert
your vehicle's battery power to AC household power •
2.1A USB port - Charge iPod®, Blackberry®, mobile phones, tablets and many other USB
devices • Cup-holder design - Fits conveniently in vehicle cup holders
Product Features: Professional grade, complete truck approved installation kit • Allows
connection of Tundra IBC45 Onboard Battery Charger to battery bank (up to 12" from
batteries) • Plug & play • Adapted to your needs and equipment • Best efficiency • Highest
safety level • Low maintenance Kit Includes: 12' section of flexible and high quality cable
with pre-assembled terminal lugs to connect the negative poles • 1' section of flexible and
high quality cable with pre-assembled terminal lugs to make the connection between the
positive pole of the battery and the DC fuse • 11' section of flexible and high quality cable
with pre-assembled terminal lugs to make the connection between the DC fuse and the
positive pole of the inverter • One DC fuse • One DC fuse holder • Waterproof PVC floor strain
reliefs • Protective plastic loom • Metallic cable clamps • High-endurance plastic tie-wraps •
Assorted screws
400W Power Inverter with USB Port
Part Number: CPI490
Product Features: 400 Watts continuous power
- 800 Watts peak power • 2 Grounded AC outlets Powers up to two household appliances • 2.1A USB
port • Cigarette lighter cord & Direct-to-battery cables included - Provides power directly
from vehicle battery • Pentagon Protection™ 5 levels of protection against failures: thermal
shutdown, reverse polarity protection, over-voltage shutdown, low voltage shutdown and
low voltage alarm.
70 amps Truck Approved Battery Charger to Batteries
Installation Kit
Part Number: CM7012
Product Features: Professional grade, complete truck approved installation kit • Allows
connection of Tundra IBC70 Onboard Battery Charger to battery bank (up to 12" from batteries)
• Plug & play • Adapted to your needs and equipment • Best efficiency • Highest safety level
• Low maintenance Kit Includes: 12' section of flexible & high quality cable w/pre-assembled
terminal lugs to connect the negative poles • 1' section of flexible and high quality cable w/
pre-assembled terminal lugs to make the connection between the positive pole of the battery
& the DC fuse • 11' section of flexible & high quality cable w/pre-assembled terminal lugs to
make the connection between the DC fuse & the positive pole of the inverter • One DC fuse •
One DC fuse holder • Waterproof PVC floor strain reliefs • Protective plastic loom • Metallic
cable clamps • High-endurance plastic tie-wraps • Assorted screws
800W Power Inverter with USB Port
Part Number: CPI890
Product Features: 800 Watts continuous power
- 1600 Watts peak power • 2 Grounded AC outlets Powers up to two household appliances • 2.1A USB port - Charge iPod®, Blackberry®,
mobile phones, tablets and many other USB devices • Direct-to-battery cables included Provides power directly from vehicle battery • Pentagon Protection™ - 5 levels of protection
against failures: thermal shutdown, reverse polarity protection, over-voltage shutdown, low
voltage shutdown and low voltage alarm
45 amps Truck Approved Battery Charger to Inverter
Installation Kit
Part Number: CM702
1000W Power Inverter with USB Port
Part Number: CPI1090
Product Features: 1000 Watts continuous power
Product Features: Professional grade, complete truck approved installation kit • Allows
link to Tundra IBC45 & IBC70 Onboard Battery Chargers to Tundra Truck Approved Power
Inverters (up to 2' from inverter) • Plug & play • Best efficiency • Highest safety level • Low
maintenance Kit Includes: 2' section of high quality and flexible welding cable, to be used
on the NEGATIVE poles, w/pre-assembled terminal lugs • 2' section of high quality & flexible
welding cable, to be used on the POSITIVE poles, w/ pre-assembled terminal lugs
- 2000 Watts peak power • 2 Grounded AC outlets Powers up to two household appliances • 2.1A USB port - Charge iPod®, Blackberry®,
mobile phones, tablets and many other USB devices • Direct-to-battery cables included
- Provides power directly from vehicle battery • Pentagon Protection™ - 5 levels of
protection against failures: thermal shutdown, reverse polarity protection, over-voltage
shutdown, low voltage shutdown and low voltage alarm PLUS: Inductive Kick-Back
Protection and GFI Self-Test
Power Inverters
1500W Power Inverter with USB Port
Part Number: CPI1590
Product Features: 1500 Watts continuous power
130W Traveler® Power Inverter with USB Port
Part Number: CPI190
Product Features: 130 Watts continuous power, 260
- 3000 Watts peak power • 3 Grounded AC outlets
- Powers up to three or more household appliances • 2.1A USB port - Charge iPod®,
Blackberry®, mobile phones, tablets and many other USB devices • Volt/Watt meter - Keep
track of power usage • Pentagon Protection™ - 5 levels of protection against failures:
thermal shutdown, reverse polarity protection, over-voltage shutdown, low voltage shutdown
& low voltage alarm PLUS: Inductive Kick-Back Protection and GFI Self-Test
Watts peak power • Grounded AC outlet - Convert vehicle
battery power to AC household power • 2.1A USB Port Charge iPod®, Blackberry®, mobile phones, tablets and
many other USB devices • Swivel arm - Convenient multiple positioning • Traveler®
compact design - Fits conveniently in vehicle
Visit us at www.panapacific.com
56
Call us at 800.726.2636
Truck & Safety Components
2500W Power Inverter with USB Port
Part Number: CPI2590
Product Features: 2500 Watts continuous power
1500W Modified Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: M1500
Product Features: 1500 Watts Continuous
- 5000 Watts peak power • 3 Grounded AC outlets
- Powers up to three or more household appliances • 2.1A USB port - Charge iPod®,
Blackberry®, mobile phones, tablets and many other USB devices • Volt/Watt meter
- Keep track of power usage • Pentagon Protection ™ - 5 levels of protection against
failures: thermal shutdown, reverse polarity protection, over-voltage shutdown, low voltage
shutdown and low voltage alarm PLUS: Inductive Kick-Back Protection and GFI Self-Test
output power - 3000 Watts Peak output power •
High efficiency • Professional Grade • Moderate battery protection (alarm at 11.5 VDC /
shut-down at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC /
Adjustable BOT Battery Optimization Technology (BOT) allows manual selection between
two distinctive modes of battery anti-discharge protections: Autonomy mode: 10 VDC or
Engine Start mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 92%
• AC outputs 2 x NEMA 5 - 15R • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
150W Modified Sine Wave Power Inverter
Part Number: M150
Product Features: 150 Watts Continuous output
power - 300 Watts Peak output power • High efficiency
• Professional Grade • Moderate battery protection (alarm at 10.5 VDC / shut-down at
10.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC • Output voltage
120 VAC +/- 3% • AC efficiency (Peak) 90% • AC outputs 1 x NEMA 5 - 15R • Operating
temperatures -30° to 131° F • DC input - Lighter Plug
2000W Modified Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: M2000
Product Features: 2000 Watts Continuous
output power - 4000 Watts Peak output power •
High efficiency • Professional Grade • Moderate battery protection (alarm at 11.5 VDC /
shut-down at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC /
Adjustable BOT Battery Optimization Technology (BOT) allows manual selection between
two distinctive modes of battery anti-discharge protections: Autonomy mode: 10 VDC or
Engine Start mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 92%
• AC outputs 2 x NEMA 5 - 15R • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
350W Modified Sine Wave Power Inverter
Part Number: M350
Product Features: 350 Watts Continuous output
power - 700 Watts Peak output power • High efficiency
• Professional Grade • Moderate battery protection (alarm at 10.5 VDC / shut-down at
10.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC • Output voltage
120 VAC +/- 3% • AC efficiency (Peak) 90% • AC outputs 1 x NEMA 5 - 15R • Operating
temperatures -30° to 131° F • DC inputs - Lighter Plug + Alligator clips
2500W Modified Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: M2500
Product Features: 2500 Watts Continuous output
power - 5000 Watts Peak output power • Steel casing
and high cooling efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5
VDC / shut-down at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC
/ Adjustable BOT Battery Optimization Technology (BOT) allows manual selection between
two distinctive modes of battery anti-discharge protections: Autonomy mode: 10 VDC or
Engine Start mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 92%
• AC outputs 2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F •
Liquid Crystal Display • DC inputs - Blocks for 3/8" terminals
600W Modified Sine Wave Power Inverter
Part Number: M600
Product Features: 600 Watts Continuous output
power - 1200 Watts Peak output power • High
efficiency • Professional Grade • Moderate battery protection (alarm at 10.5 VDC / shutdown at 10.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC • Output
voltage 120 VAC +/- 3% • AC efficiency (Peak) 90% • AC outputs 2 x NEMA 5 - 15R •
Operating temperatures -30° to 131° F • DC inputs - 1 meter cables with lugs
3000W Modified Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: M3000
Product Features: 3000 Watts Continuous output
1000W Modified Sine Wave Power Inverter
Part Number: M1000
Product Features: 1000 Watts Continuous output
power - 6000 Watts Peak output power • Steel casing
and high cooling efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5
VDC / shut-down at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC
/ Adjustable BOT Battery Optimization Technology (BOT) allows manual selection between
two distinctive modes of battery anti-discharge protections: Autonomy mode: 10 VDC or
Engine Start mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 92%
• AC outputs 2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F •
Liquid Crystal Display • DC inputs - Blocks for 3/8" terminals
power - 2000 Watts Peak output power • High
efficiency • Professional Grade • Moderate battery protection (alarm at 10.5 VDC / shutdown at 10.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC • Output
voltage 120 VAC +/- 3% • AC efficiency (Peak) 90% • AC outputs 2 x NEMA 5 - 15R •
Operating temperatures -30° to 131° F • DC inputs - Blocks for 3/8" terminals
Call us at 800.726.2636
57
Visit us at www.panapacific.com
Truck & Safety Components
2500W Modified Sine Wave Power Inverter
w/ Battery Optimization Technology - 24 Volt
Part Number: M2524
Product Features: 2500 Watts Continuous output
1800W Pure Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: S1800
Product Features: 1800 Watts Continuous output
power - 5000 Watts Peak output power • Steel casing and high cooling efficiency •
Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down at 11.0
VDC) • Software controlled • Operating input voltage 20 - 30 VDC / Adjustable BOT Battery
Optimization Technology (BOT) allows manual selection between two distinctive modes
of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start mode: 11
VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 92% • AC outputs 2 x NEMA
5 - 15R + hardwire • Operating temperatures -30° to 131° F • Liquid Crystal Display • DC
inputs - Blocks for 3/8" terminals
power - 3600 Watts Peak output power • High
efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down
at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC / Adjustable BOT
Battery Optimization Technology (BOT) allows manual selection between two distinctive
modes of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start
mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 98% • AC outputs
2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
3000W Modified Sine Wave Power Inverter
w/ Battery Optimization Technology - 24 Volt
Part Number: M3024
Product Features: 3000 Watts Continuous output
2500W Pure Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: S2500
Product Features: 2500 Watts Continuous
power - 6000 Watts Peak output power • Steel casing and high cooling efficiency •
Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down at 11.0
VDC) • Software controlled • Operating input voltage 20 - 30 VDC / Adjustable BOT Battery
Optimization Technology (BOT) allows manual selection between two distinctive modes
of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start mode: 11
VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 92% • AC outputs 2 x NEMA
5 - 15R + hardwire • Operating temp -30° to 131° F • Liquid Crystal Display • DC inputs Blocks for 3/8" terminals
output power - 5000 Watts Peak output power • High
efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down
at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC / Adjustable BOT
Battery Optimization Technology (BOT) allows manual selection between two distinctive
modes of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start
mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 98% • AC outputs
2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
300W Pure Sine Wave Power Inverter
Part Number: S300
Product Features: 300 Watts Continuous output
3000W Pure Sine Wave Power Inverter
with Battery Optimization Technology
Part Number: S3000
Product Features: 3000 Watts Continuous
power - 600 Watts Peak output power • High efficiency • Professional Grade • Moderate
battery protection (alarm at 10.5 VDC / shut-down at 10.0 VDC) • Software controlled •
Operating input voltage 10 - 15 VDC • Output voltage 120 VAC +/- 3% • AC efficiency
(Peak) 98% • AC outputs 2 x NEMA 5 - 15R • Operating temp -30° to 131° F • DC inputs Screws for 6 terminals
output power - 6000 Watts Peak output power • High
efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down
at 11.0 VDC) • Software controlled • Operating input voltage 10 - 15 VDC / Adjustable BOT
Battery Optimization Technology (BOT) allows manual selection between two distinctive
modes of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start
mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 98% • AC outputs
2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
600W Pure Sine Wave Power Inverter
Part Number: S600
Product Features: 600 Watts Continuous output
power - 1200 Watts Peak output power • High efficiency • Professional Grade • Moderate
battery protection (alarm at 10.5 VDC / shut-down at 10.0 VDC) • Software controlled •
Operating input voltage 10 - 15 VDC • Output voltage 120 VAC +/- 3% • AC efficiency
(Peak) 98% • AC outputs 1 x NEMA 5 - 15R • Operating temp -30° to 131° F • DC inputs Blocks for 3/8" terminals
2500W Pure Sine Wave Power Inverter
w/ Battery Optimization Technology - 24 Volts
Part Number: S2524
Product Features: 2500 Watts Continuous
1200W Pure Sine Wave Power Inverter
Part Number: S1200
Product Features: 1200 Watts Continuous output
output power - 5000 Watts Peak output power • High
efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down
at 11.0 VDC) • Software controlled • Operating input voltage 20 - 30 VDC / Adjustable BOT
Battery Optimization Technology (BOT) allows manual selection between two distinctive
modes of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start
mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 98% • AC outputs
2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
power - 2400 Watts Peak output power • High efficiency • Professional Grade • Moderate
battery protection (alarm at 10.5 VDC / shut-down at 10.0 VDC) • Software controlled •
Operating input voltage 10 - 15 VDC • Output voltage 120 VAC +/- 3% • AC efficiency
(Peak) 98% • AC outputs 2 x NEMA 5 - 15R • Operating temp -30° to 131° F • DC inputs Blocks for 3/8" terminals
Visit us at www.panapacific.com
58
Call us at 800.726.2636
Truck & Safety Components
PowerVerter Ultra-Compact Inverter - Portable
Power for All Applications
Part Number: PV1000HF
Product Features: Harness your vehicle's battery
3000W Pure Sine Wave Power Inverter
w/ Battery Optimization Technology - 24 Volts
Part Number: S3024
Product Features: 3000 Watts Continuous
to efficiently power office equipment on the road or power tools at a work site. Continuously
supplies up to 1000 watts of 120V AC power to 3 AC outlets from any 12V battery. Includes a
set of DC terminals for simple installation. Compact, lightweight metal case design is among
the smallest, most rugged inverters available at this power level • Ideal for TVs, DVD players,
small microwaves, power tools, small coffeemakers, game systems, desktop computers,
laptops, portable electronics, lighting and other AC applications under 1000 watts.
Package Includes: PV1000HF Inverter • Warranty information • Instruction manual
output power - 6000 Watts Peak output power • High
efficiency • Industrial Grade • Moderate battery protection (alarm at 11.5 VDC / shut-down
at 11.0 VDC) • Software controlled • Operating input voltage 20 - 30 VDC / Adjustable BOT
Battery Optimization Technology (BOT) allows manual selection between two distinctive
modes of battery anti-discharge protections: Autonomy mode: 10 VDC or Engine Start
mode: 11 VDC • Output voltage 120 VAC +/- 3% • AC efficiency (Peak) 98% • AC outputs
2 x NEMA 5 - 15R + hardwire • Operating temperatures -30° to 131° F • Liquid Crystal
Display • DC inputs - Blocks for 3/8" terminals
PowerVerter Ultra-Compact Inverter - Portable
Power for All Applications
Part Number: PV1800HF
Product Features: Harness your vehicle's battery to
PowerVerter RV Inverter/Charger
Part Number: MRV2012UL
Product Features: Quiet Mobile Power for RV,
efficiently power office equipment on the road or power tools at a work site • Continuously
supplies up to 1800 watts of 120V AC power to 4 AC outlets from any 12V battery or
automotive DC source. Includes a set of nut-and-bolt style DC terminals for simple
installation • Super-compact, lightweight metal case design is among the smallest, most
rugged inverters available at this power level.
Applications: Ideal for complete desktop computer systems, laptops, portable electronics,
refrigerators, coffeepots, microwave ovens, battery chargers for cell phones, pagers,
notepads and games, large power tools, TV/VCR/Stereo systems, camcorders, lighting and
other power AC applications under 1800 watts.
Package Includes: PV1800HF Inverter, warranty information and instruction manual
Camping & Boating Applications Tripp Lite's MRV2012UL
Inverter/Charger is the quiet alternative to gas generators - with no fumes, fuel or noise
to deal with! It provides equipment with utility or generator-supplied AC electricity filtered
through premium ISOBAR surge protection. This heavy-duty DC-to-AC inverter with automatic
line-to-battery transfer and integrated charging system serves as an extended-run UPS,
a standalone power source or an automotive inverter suitable for rugged RV applications.
Supplies up to 2000 watts of continuous 120V AC power from any 12V DC battery or
automotive DC source. OverPower™ inverter output feature temporarily provides up to
150% of the continuous output for up to 60 minutes and DoubleBoost™ inverter output
feature delivers up to 200% of the continuous output for up to 10 seconds, providing the
extra power needed to cold-start heavy-duty power tools and motorized equipment. When
hardwire AC input is energized, commercial power passes through to connected equipment
and the battery set is recharged via 3-stage charging system with user-selectable 25/100
amp charger output. In UPS mode, the MRV APS system responds to blackouts and voltage
fluctuations with a near-instantaneous automatic transfer to battery-derived AC output.
Includes a set of high-current DC input terminal posts for simple installation (user supplies
batteries and cabling - see owner's manual for recommendations). Passes sine wave utility
or generator power during battery charging and UPS line power operation, plus efficient
PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer
design with frequency control powers resistive electronic loads or large inductive motors,
compressors and other items with high current needs on startup. Optional APSRM4 wired
remote control module with full status LEDs provides remote power inverter on/off switching
and continuous status information (APSRM4 sold separately). Supports an unlimited amount
of runtime with any number of user-supplied batteries connected. Highly adaptable to a
variety of applications and site conditions with adjustable charger settings for wet/gel battery
types and selectable line to battery power transfer voltages.
Applications: Versatile inverter/charger system with automatic transfer switching serves
as a vehicular inverter for RVs, over-the-road trucking, conversion vans and fleet service
vehicles. Also serves as a standalone alternative power source for off-grid, alternative
energy or export applications and as an uninterruptible power supply (UPS) for equipment
compatible with a 16.6 millisecond transfer time.
Package Includes: MRV2012UL Inverter/Charger, instruction manual with warranty
information, battery temperature sensor cable and conduit hanger
Call us at 800.726.2636
PowerVerter Ultra-Compact Inverter - Portable
Power for All Applications
Part Number: PV3000HF
Product Features: Harness your vehicle's battery to
efficiently power office equipment on the road or power tools at a work site. Continuously
supplies up to 3000 watts of 120V AC power to 4 AC outlets from any 12V battery or
automotive DC source. Includes a PV remote and 25 feet of cable. Super-compact,
lightweight metal case design is among the smallest, most rugged inverters available at
this power level. Ideal for TVs, DVD players, microwaves, tools, coffeemakers and game
systems under 3000 watts.
Package Includes: PV3000HF Inverter • Remote control LED/switch module • 25-ft. cable
• Warranty information • Instruction manual
PowerVerter RV Inverter/Charger
Part Number: RV1250ULHW
Product Features: 12V DC or 120V AC input and
120V AC output (hardwired) • 1,250 watts continuous
and 2,500 watts DoubleBoost inverter output • 3 stage, 14/55 amp selectable wet/dry
cell battery charger • Built-in Isobar® premium AC surge protection and Auto Transfer
Switching option for battery backup / UPS operation • Tested to power inverter standards
UL458 (USA) and CSA (Canada) • High reliability large-transformer design with protected
DC and AC wiring terminals
Applications: Versatile inverter/charger system with auto-transfer switching serves as
an automotive inverter for RVs, over-the-road trucking, conversion vans and fleet service
vehicles; a standalone alternative power source for off-grid, alternative energy or export
applications and as an uninterruptible power supply (UPS) for items compatible with a 16.6
millisecond transfer time.
Package Includes: RV1250ULHW Inverter/Charger • Instruction manual with warranty
information
59
Visit us at www.panapacific.com
Truck & Safety Components
Power Inverter
Inverter Installation
Complete Kits
Power
Kits & Parts
2000W Truck Approved Power Inverter
Installation Kit
Part Number: CM2012
Product Features: Professional grade, complete truck
Remote Control Module For Tripp Lite Power
Inverters
Part Number: APSRM4
approved installation kit • Allows connection of Tundra M2000 and S1800 Power Inverters to
battery bank (up to 12" from batteries) • Plug & play • Adapted to your needs & equipment
• Highest safety level Kit Includes: 12' section of flexible & high quality cable w/preassembled terminal lugs to connect the negative poles • 1' section of flexible & high quality
cable w/pre-assembled terminal lugs to make the connection between the positive pole of
the battery and the DC fuse • 11' section of flexible & high quality cable w/pre-assembled
terminal lugs to make the connection between the DC fuse and the positive pole of the
inverter • One DC fuse • One DC fuse holder • Waterproof PVC floor strain reliefs • Protective
plastic loom • Metallic cable clamps • High-endurance plastic tie-wraps • Assorted screws •
Also available in 6, 8 & 10 feet versions (Call to order)
Product Features: Tripp Lite's APSRM4 provides remote monitoring & control of select
Tripp Lite Inverters (PV series) and Inverter/Chargers (RV, APS and EMS series), which feature
an RJ-style connector. The remote module's compact housing includes a switch (which
controls the operation of the connected Inverter or Inverter/Charger) as well as two sets of
intuitive "traffic light" LEDs. LEDs indicate approximate battery charge & load level when
used with an Inverter. LEDs indicate appropriate battery charge or charge rate (depending
on switch position) and operational status. Alternate LED labeling is provided. The module
also includes mounting slots/holes for multiple mounting options (with user-supplied screws)
including behind or below a dashboard or compartment. A face plate is included for additional
front-panel mounting options for RV, marine or vehicular detailing. A daisy-chain port links
the module to an Inverter or Inverter/Charger with an included 50-ft. cord. The port also
allows multiple modules (sold separately) to connect together to control a single Inverter or
Inverter/Charger • A Master Override Port enables automatic override of the Remote Control
Module to shut off the connected Inverter or Inverter/Charger under various safety/operational
conditions: Ignition ON (prevents TV or other distractions while driving) • Ignition OFF prevents
inadvertent battery drain while parked • Battery Disconnect ensures safe shutoff when 12V
electrical system is disconnected separately • Water Encroachment reduces shock hazard in
marine applications • Ideal for remote monitoring and control of select Tripp Lite Inverters (PV
series) and Inverter/Chargers (RV, APS and EMS series), which feature an RJ-style connector.
Package Includes: Remote Control Module • Face Plate • 50-ft. Remote Control Cord • 25ft. Master Override Cord • LED labels and Instruction Manual
2500W Truck Approved Power Inverter
Installation Kit
Part Number: CM2512
Product Features: Professional grade, complete truck
approved installation kit • Allows connection of Tundra M2500 and S2500 Power Inverters to
battery bank (up to 12" from batteries) • Plug & play • Adapted to your needs & equipment
• Highest safety level Kit Includes: 12' section of flexible & high quality cable w/preassembled terminal lugs to connect the negative poles • 1' section of flexible & high quality
cable w/pre-assembled terminal lugs to make the connection between the positive pole of
the battery and the DC fuse • 11' section of flexible & high quality cable w/pre-assembled
terminal lugs to make the connection between the DC fuse and the positive pole of the
inverter • One DC fuse • One DC fuse holder • Waterproof PVC floor strain reliefs • Protective
plastic loom • Metallic cable clamps • High-endurance plastic tie-wraps • Assorted screws •
Also available in 6, 8 & 10 feet versions (Call to order)
1000W Truck Approved Power Inverter
Installation Kit
Part Number: CM1012
Product Features: Professional grade, complete
truck approved installation kit • Allows connection of Tundra M600, M1000, S300, and S600
Power Inverters to battery bank (up to 12" from batteries) • Plug and play • Adapted to
your needs and equipment • Best efficiency • Highest safety level • Low maintenance Kit
Includes: 12' section of flexible & high quality cable with pre-assembled terminal lugs to
connect the negative poles • 1' section of flexible & high quality cable with pre-assembled
terminal lugs to make the connection between the positive pole of the battery and the DC
fuse • 11' section of flexible & high quality cable with pre-assembled terminal lugs to make
the connection between the DC fuse and the positive pole of the inverter • One DC fuse • One
DC fuse holder • Waterproof PVC floor strain reliefs • Protective plastic loom • Metallic cable
clamps • High-endurance plastic tie-wraps • Assorted screws • Also available in 6, 8 and 10
feet versions (special orders)
3000W Truck Approved Power Inverter
Installation Kit
Part Number: CM3012
Product Features: Professional grade, complete truck
approved installation kit • Allows connection of Tundra M3000 and S3000 Power Inverters to
battery bank (up to 12" from batteries) • Plug & play • Adapted to your needs and equipment
• Highest safety level Kit Includes: 12' section of flexible & high quality cable w/preassembled terminal lugs to connect the negative poles • 1' section of flexible and high quality
cable w/pre-assembled terminal lugs to make the connection between the positive pole of
the battery and the DC fuse • 11' section of flexible & high quality cable w/ pre-assembled
terminal lugs to make the connection between the DC fuse and the positive pole of the
inverter • One DC fuse • One DC fuse holder • Waterproof PVC floor strain reliefs • Protective
plastic loom • Metallic cable clamps • High-endurance plastic tie-wraps • Assorted screws •
Also available in 6, 8 & 10 feet versions (Call to order)
1500W Truck Approved Power Inverter
Installation Kit
Part Number: CM1512
Product Features: Professional grade, complete
truck approved installation kit • Allows connection of Tundra M1500 Power Inverter to battery
bank (up to 12" from batteries) • Plug & play • Adapted to your needs & equipment • Highest
safety level Kit Includes: 12' section of flexible & high quality cable w/pre-assembled
terminal lugs to connect the negative poles • 1' section of flexible & high quality cable w/preassembled terminal lugs to make the connection between the positive pole of the battery and
the DC fuse • 11' section of flexible & high quality cable w/pre-assembled terminal lugs to
make the connection between the DC fuse and the positive pole of the inverter • One DC fuse
• One DC fuse holder • Waterproof PVC floor strain reliefs • Protective plastic loom • Metallic
cable clamps • High-endurance plastic tie-wraps • Assorted screws • Also available in 6, 8 &
10 feet versions (Call to order)
Visit us at www.panapacific.com
Remote On/Off Switch for Cobra Power Inverters
Part Number: CPIA20
Product Features: Remote Control for use with CPI1575,
and CPI2575. The Remote On/Off Switch allows you to turn
on or off Cobra power inverters from a convenient location up to 20 feet (6 m) away - while the inverter is mounted out of reach and sight.
60
Call us at 800.726.2636
Truck & Safety Components
Heavy-Duty Power Cables
Part Number: CPIA4000BC
Product Features: 10 Ft. #4 AWG Heavy-Duty Cables
12/24V DC, 107dB External Reverse Motion
Warning Alarm
Part Number: BU2000CW-107
Product Features: Self Contained • Rugged encasement
with Ring Terminals • 8 Ft. #8 AWG Chassis Ground Cable with Terminals • Additional
Terminals Included
to withstand harsh environments • Waterproof Design • Conforms to SAE J994 • Output
Level - 107 dB • Draws
- Seamless Bluetooth Connectivity: Car stereo with Bluetooth...
- Powerful, Clear Audio Performance: Equipped with a built-in...
- High-Quality Music Playback via USB: Enjoy clear, detailed...
- Compact 1-DIN Design: Single din radio is designed with a...
- Simple Sound Customization: Dedicated Direct EQ Keys let you...
- 【High Quality Car Stereo Player】- Our double din car...
- 【Double Din Car Stereo Phone Mirror Link】- Support...
- 【7 inch Double Din Car Radio With Bluetooth 5.0 and FM...
- 【Car Stereo Double Din Inputs】- USB /SD/AUX input. car...
- 【Standard Double Din Stereo with Backup Camera】- Parking...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: HINO PA-2016-025
Replacement Service Bulletin Number:
MFR Communication Date: 2016-09-30
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT ADAPTIVE/MOBILITY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.