7” Color LCD System with Right Side View
Color CMOS Camera and 16' Cable
Part Number: MCS-23PP
Product Features: Monitor (Part No. M130C) Features:
7" Color LCD monitor with wide viewing angle • Three PAL/NTSC camera inputs • One
front panel mount A/V input for games • Built-in speaker • Mirror & normal image switch •
Button-controlled brightness • Full function remote control • Accessories included: Sun shield
and U-bracket, Universal pedestal mount, Flush in-dash mounting housing, Power/camera
input harness and remote control • Right View Camera (Part No. C-SDR-CMOS) Features:
Custom side mount 1/3" color CMOS camera • Specifically designed for right side mounting
• Waterproof camera and housing • Reverse image • Night vision • 92° - 120° viewing angle
• Easy mounting • Paintable housing • Includes 16' Extender Cable (Part No. RRC-16)

7" Color LCD monitor with wide viewing angle • Three PAL/NTSC camera inputs • One front
panel mount A/V input for games • Built-in speaker • Mirror & normal image switch • Buttoncontrolled brightness • Full function remote control • Accessories included: Sun shield and
U-bracket, Universal pedestal mount, Flush in-dash mounting housing, Power/camera input
harness and remote control • Rear View Camera (Part No. C120) Features: 1/3" Color CMOS
Sensor • Built-in 18 IR LEDs for improved night vision • Built-in waterproof microphone
• Reverse image picture • Waterproof housing • Adjustable mount and sun shield •
Waterproof cable connection • Operating Temperature: -20C to 70C (Relative humidity
95%) • Storage Temperature: -40C to 80C (Relative humidity 95%) • Right View Camera
(Part No. C-SDR-CMOS) Features: Custom side mount 1/3" color CMOS camera • Specifically
designed for right side mounting • Waterproof camera and housing • Reverse image • Night
vision • 92° - 120° viewing angle • Easy mounting • Paintable housing • Left View Camera
(Part No. C-SDL-CMOS) Features: Custom side mount 1/3" color CMOS camera • Specifically
designed for left side mounting • Waterproof camera and housing • Reverse image • Night
vision • 92° - 120° viewing angle • Easy mounting • Paintable housing • Includes one 16'
Extender Cable (Part No. RRC-16) and one 35' Extender cable (Part No. RRC-35)

Premium 7” Color LCD System with Two
CMOS Cameras (Rear View and Right Side
View) and 16' & 35' Cables
Part Number: MCS-30PP
Product Features: Monitor (Part No. M130C)
Features: 7" Color LCD monitor with wide viewing angle • Three PAL/NTSC camera inputs
• One front panel mount A/V input for games • Built-in speaker • Mirror and normal image
switch • Button-controlled brightness • Full function remote control • Accessories included:
Sun shield and U-bracket, Universal pedestal mount, Flush in-dash mounting housing, Power/
camera input harness and remote control • Rear View Camera (Part No. C120) Features:
1/3" Color CMOS Sensor • Built-in 18 IR LEDs for improved night vision • Built-in
waterproof mic • Reverse image picture • Waterproof housing • Adjustable mount & sun
shield • Waterproof cable connection • Operating Temperature: -20C to 70C (Relative
humidity 95%) • Storage Temperature: -40C to 80C (Relative humidity 95%) • Right View
Camera (Part No. C-SDR-CMOS) Features: Custom side mount 1/3" color CMOS camera •
Specifically designed for right side mounting • Waterproof camera and housing • Reverse
image • Night vision • 92° - 120° viewing angle • Easy mounting • Paintable housing •
Includes one 16' Extender Cable (Part No. RRC-16) & one 35' Extender Cable (Part No. RRC-35)

Premium 7” Color LCD System with Three
CMOS Cameras (Rear View, Right Side View
and Left Side View), 16', 35' and 70' Cables
and Disconnect Cable
Part Number: MCS-40PP-ST
Product Features: Monitor (Part No. M130C)
Features: 7" Color LCD monitor with wide viewing
angle • Three PAL/NTSC camera inputs • One front
panel mount A/V input for games • Built-in speaker •
Mirror & normal image switch • Button-controlled brightness • Full function remote control
• Accessories included: Sun shield and U-bracket, Universal pedestal mount, Flush in-dash
mounting housing, Power/camera input harness and remote control • Rear View Camera
(Part No. C120) Features: 1/3" Color CMOS Sensor • Built-in 18 IR LEDs for improved night
vision • Built-in waterproof microphone • Reverse image picture • Waterproof housing
• Adjustable mount & sun shield • Waterproof cable connection • Operating Temp: -20C
to 70C (Relative humidity 95%) • Storage Temp: -40C to 80C (Relative humidity 95%) •
Right View Camera (Part No. C-SDR-CMOS) Features: Custom side mount 1/3" color CMOS
camera • Specifically designed for right side mounting • Waterproof camera and housing
• Reverse image • Night vision • 92° - 120° viewing angle • Easy mounting • Paintable
housing • Left View Camera (Part No. C-SDL-CMOS) Features: Custom side mount 1/3"
color CMOS camera • Specifically designed for left side mounting • Waterproof camera
and housing • Reverse image • Night vision • 92° - 120° viewing angle • Easy mounting •
Paintable housing • Includes one 16' Extender Cable (Part No. RRC-16), one 35' Extender
Cable (Part No. RRC-35) and one 70' Extender Cable (Part No. RRC-70) • Also includes
Heavy-Duty trailer Pro-View Camera Cable (Part No. CAM-HAR-HDT) - cable stretches up
to 10' in length, compatible w/Pro-View Camera Systems, Panel mount quick disconnect
sockets with spring mounted covers for both tractor and trailer, coiled cable with
connectors, connects any trailer mounted camera with any tractor mounted monitor.

Premium 7” Color LCD System with Two
CMOS Cameras (Rear View and Right
Side View), 16', 35' and 70' Cables and
Disconnect Cable
Part Number: MCS-30PP-ST
Product Features: Monitor (Part No. M130C)
Features: 7" Color LCD monitor with wide viewing angle
• Three PAL/NTSC camera inputs • One front panel mount A/V input for games • Built-in
speaker • Mirror & normal image switch • Button-controlled brightness • Full function
remote control • Accessories included: Sun shield and U-bracket, Universal pedestal mount,
Flush in-dash mounting housing, Power/camera input harness and remote control • Rear
View Camera (Part No. C120) Features: 1/3" Color CMOS Sensor • Built-in 18 IR LEDs
for improved night vision • Built-in waterproof microphone • Reverse image picture •
Waterproof housing • Adjustable mount & sun shield • Waterproof cable connection •
Operating Temp: -20C to 70C (Relative humidity 95%) • Storage Temp: -40C to 80C
(Relative humidity 95%) • Right View Camera (Part No. C-SDR-CMOS) Features: Custom
side mount 1/3" color CMOS camera • Specifically designed for right side mounting •
Waterproof camera and housing • Reverse image • Night vision • 92° - 120° viewing angle
• Easy mounting • Paintable housing • Includes one 16' Extender Cable (Part No. RRC-16),
one 35' Extender Cable (Part No. RRC-35) and one 70' Extender Cable (Part No. RRC-70) •
Also includes Heavy-Duty trailer Pro-View Camera Cable (Part No. CAM-HAR-HDT) - cable
stretches up to 10' in length, compatible w/Pro-View Camera Systems, Panel mount quick
disconnect sockets with spring mounted covers for both tractor and trailer, coiled cable
with connectors, connects any trailer mounted camera with any tractor mounted monitor.

Call us at 800.726.2636

51

Visit us at www.panapacific.com

Truck & Safety Components

PathFindIR™ Driver’s Night Vision
System - Kit w/ Monitor
Part Number: PP803788
Product Features: The PathFindIR™ is a

PathFindIR™ II – Installation Kit with
Monitor
Part Number: 421-0053-00
Includes: PathFindIR™ II Camera Mount with

compact thermal imager that allows you to see
up to four times farther in total darkness than you
can see with your headlights. Typical headlights only let you see about 450' straight ahead,
but PathFindIR™ sees heat not light, so that you can see everything in front of you. Clearly
see road hazards like animals, pedestrians and disabled vehicles at night or day, in good
weather and bad, without being blinded by the glare of oncoming headlights. This complete
kit includes everything needed for a complete installation, except for the fasteners that mount
the camera bracket to the vehicle; 1/4" (6.35mm) holes are provided in the bracket. The
monitor has three additional inputs for rear and side cameras and comes with both a flush
mount bezel and a swiveling adhesive mount universal knuckle. The camera, when mounted
in its bracket, is about 3" by 3" by 4". The cable exits the bottom side of the camera/
mounting bracket. The connection between the camera and 20' long cable is completely
sealed against moisture. The camera must be mounted outside the cab of the vehicle, as it
cannot "see" through glass.
Includes: PathFindIR™ thermal night vision camera (PP703773): includes a universal mounting
bracket and hardware for securing and aiming the camera • High resolution, 7-inch LCD
monitor (M130C): wide viewing angle; one PAL/NTSC camera input and one front panel mount
A/V input for the PathfindIR™ camera; built-in speaker; mirror and normal image switch;
button-controlled brightness; and, full function remote • PathFindIR™ 20' Cable (PP503774)
with an adapter that fits most monitor auxiliary video in jacks • PathFindIR™ Installation
Instructions • For additional information, visit FLIR Thermal Imaging for Transportation

Adjustable Arm (Part No. 261-2319-00); ECU
Mounting Bracket (Part No. 261-2270-00); 7"
LCD Monitor with Sun Shield, Bracket and Power Cable (Part No. 4105734); PathFindIR™ II
Video Cable to Monitor Video (BNC to S-Video) cable - 9-foot (Part No. 4105735).

Camera Systems Parts & Cables

AMOS 118o NTSC Camera
Part Number: 0135110
Product Features: Next generation CMOS sensor • Light
sensitivity < 0.05 lux • Integrated Safety ticker to show that
camera is running and active • Operating temp between -40°C to +85°C • Power input 12
- 24V/DC • Chemically hardened glass • Nitrogen-filled housing, watertight IP68 according
to IEC 60529 & IP69K according to DIN 40050-9 • Heated lens glass, therefore no problems
with condensation or frost • Impact & vibration proof • Fixed lens • Resolution sensor
element: 640 x 480 pixels • The camera has a 0.5m cable including a waterproof molded 4
pins male connector • For use with Orlaco monitors

PathFindIR™ II – PD/AD
Driver’s Night Vision Camera
Part Number: 334-0050-00
Product Features: Includes: Camera (30Hz

AMOS 118° NTSC MIRROR Camera
Part Number: 0135310
Product Features: Next generation CMOS sensor • Light

Domestic), Cables and ECU with Pedestrian
Detection, and Animal Detection. PathFindIR™
II is the first driving vision system to incorporate the latest in FLIR’s thermal imaging
technology coupled with pedestrian and animal detection symbology. Simplistic, clear images,
in absolute darkness, with no distraction from headlight glare, pedestrians, animals, and
road hazards are displayed farther than headlights. Pedestrians and animals in the scene
are highlighted through the use of the sophisticated software interface for added awareness.
The PathFindIR™ II’s simple integration is a powerful safety addition to any vehicle, large or
small, in cold or warm weather conditions. The PathFindIR™ II image can be displayed on
standard aftermarket monitors, or, through third party integration technologies into factory
navigation screens. Optional mounting brackets for the ECU and camera are available, as well
as, an optional installation (with monitor) kit which includes both brackets and a 7” LCD dash
mounted monitor. Installation Kit with Monitor is Part No. 421-0053-00.

sensitivity < 0.05 lux • Integrated Safety ticker to show that camera is running and active
• Operating temp between -40°C to +85°C • Power input 12 - 24V/DC • Chemically
hardened glass • Nitrogen-filled housing, watertight IP68 according to IEC 60529 & IP69K
according to DIN 40050-9 • Heated lens glass, therefore no problems with condensation or
frost • Impact & vibration proof • Fixed lens • Resolution sensor element: 640 x 480 pixels
• The camera has a 0.5m cable including a waterproof molded 4 pins male connector •
NTSC Mirror - for use with 3rd-party monitors that do not have mirror image capabilities

AMOS 118o NTSC Communicator Camera
Part Number: 0135810
Product Features: Up to 4x digital zoom • Insert
customizable guiding lines • Different fisheye distortions can be corrected • Adjustable
mirror/flip settings • Customizable text features (e.g. camera name inserting) • Operating
temp -40°C to +85°C • Power input 12 - 24V/DC • Chemically hardened glass • Nitrogenfilled housing • Heated lens glass, therefore no problems with condensation or frost •
Resolution sensor element: 640 x 480 pixels • Impact & vibration proof • For use with
Serial Orlaco Monitor

PathFindIR™ II – Imager Only
Driver’s Night Vision Camera
Part Number: 334-0052-00
Product Features: Includes:
Camera (30Hz Domestic), ECU, and Cables.
PathFindIR™ II Imager Only incorporates the
latest in FLIR’s thermal imaging technology in a
simple to install and use driving vision assist system. The Imager Only system incorporates
the same camera, ECU, cables as the AD/PD system, however it does not include the
pedestrian or animal detection or symbology. Simplistic, clear images, in absolute darkness,
with no distraction from headlight glare, pedestrians, animals, and road hazards are displayed
farther than headlights. The PathFindIR™ II image can be displayed on standard aftermarket
monitors, or, through third party integration technologies into factory navigation screens. The
PathFindIR™ II’s simple integration is a powerful safety addition to any vehicle, large or small,
in cold or warm weather conditions. Optional mounting brackets for the ECU and camera are
available, as well as, an optional monitor kit which includes both brackets and a 7” LCD dash
mounted monitor. Optional mounting brackets for the ECU and camera are available, as well
as, an optional installation (with monitor) kit which includes both brackets and a 7” LCD dash
mounted monitor. Installation Kit with Monitor is Part No. 421-0053-00.

Visit us at www.panapacific.com

AMOS 118o NTSC IR LED Communicator Camera
Part Number: 0146230
Product Features: Up to 4x digital zoom • Insert
customizable guiding lines • Different fisheye distortions can be corrected • Adjustable
mirror/flip settings • Customizable text features (e.g. camera name inserting) • Operating
temp between -40°C to +85°C • Power input 12 - 24V/DC • Chemically hardened glass
• Nitrogen-filled housing • Heated lens glass, therefore no problems with condensation
or frost • Resolution sensor element: 640 x 480 pixels • Impact & vibration proof • The
camera has a 0.5m cable including a waterproof molded 7 pins male connector
• For use with Serial Orlaco Monitor

52

Call us at 800.726.2636

Truck & Safety Components

AMOS 118o NTSC ATVC (All Time Vision Cleaning)
MIRROR Camera
Part Number: 0400260
Product Features: How it Works - the Camera has a self

ATVC Pump 24V Reservoir 6L
Part Number: 3500810
Product Features: Holds 6 Liters of washer fluid • Pump
can be connected to the ATVC I/O Box (cable included with ATVC I/O Box) • Includes
mounting bracket

cleaning mode. The Camera lens is built in a glass tube which can rotate via an industrial
stepping motor. Upon activation, water (eg: wiper fluid) is sprayed onto the glass surface
via a nozzle, the rotation is activated & the glass surface is cleaned via a build in wiper. The
stepping motor is controlled via the I/O Box (Part No. 0404190 - Sold Separately). Activation
is done via the Orlaco Monitor or an input in the I/O Box • The ATVC I/O Box is powered with
a separate dedicated 24V/DC power supply (not via the Orlaco monitor). The ATVC I/O Box
supplies power to the camera and the optional pump/water tank (Part No. 3500810 - Sold
Separately) • The AMOS 118º ATVC is in mirror-mode as a standard. The AMOS 118º ATVC
Mirror is designed to be used as a rearview camera (this makes it easy to adapt to third
party monitors) • Next generation CMOS sensor • Rotation endless 360º • 0.5m video cable
7p and 0.5m water hose w/valve to connect to water pump • The connection between the
ATVC I/O Box & the ATVC camera must be made via a cable with 7-pin connectors

Dynamic Cables 4 Pin
Product Features: Orlaco Dynamic cables have 4pins
male to a 4pins female connector • Suitable for dynamic use • All cables are specially
developed by Orlaco engineering • Soft cover w/small bend radius • EMC screening for
optimum performance of the equipment in crowded areas w/electromagnetic noise •
Resistant to oil & petrol • Operating temperature -40°C to +85°C • Watertight molded
cable connectors • Special lengths or versions are available upon request

Part Number: 0304340 - 5m
Part Number: 0301730 - 15m
Part Number: 0301830 - 21m

7” RLED High Resolution Monitor (4 Pin)
Part Number: 0208603
Product Features: 7" TFT liquid crystal display module with
LED backlight • 2m multicable (power) open wired, 2 multicable (video) with 4 pins female
connector • User-adjustable - 132mm mounting bracket • Operating temperature between
-40°C to +85°C • Impact & vibration resistant • Power protected against induction
voltages, load dumps and over- and undervoltage • High resolution pixel WVGA 800 x RGB
x 480 • Brightness automatically adjusts to the ambient light • Option of a marker line per
camera on the screen for the optimum determination of distance • Integrated sun visor •
Input Voltage 12 - 60V/DC +/-10% • Watertight molded connectors

Multi Cables (Standard) 4 Pin
Product Features: Orlaco Multi cables have 4pins male to a
4pins female connector • These standard cables can be used if no special requirements
like mechanical protection or dynamic movement of the cable is needed • All cables are
specially developed by Orlaco engineering • EMC screening for optimum performance of
the equipment in crowded areas w/electromagnetic noise • Resistant to oil and petrol •
Operating temperature -40°C to +85°C • Watertight molded cable connectors
• Special lengths or versions are available upon request
Part Number: 0301960 - 1m
Part Number: 0301870 - 2m
Part Number: 0301890 - 3m
Part Number: 0301880 - 5m
Part Number: 0301930 - 8m
Part Number: 0301900 - 11m
Part Number: 0301920 - 16m
Part Number: 0301940 - 21m

7” RLED Monitor w/Integrated Sun Visor (7 Pin)
Part Number: 0208632
Product Features: 7" TFT liquid crystal display module
with LED backlight • 6m multicable (power) open wired, 6m multicable (video) with 7 pins
female connector • User-adjustable - 132mm mounting bracket • Operating temperature
between -40°C to +85°C • Impact and vibration resistant • Power protected against
induction voltages, load dumps and over- and undervoltage • High resolution pixel WVGA
800 x RGB x 480 • Mirror image setting • Power Protected against: induction voltages,
load dumps, over-and-under voltage • Brightness automatically adjusts to the ambient
light • Option of a marker line per camera on the screen for the optimum determination of
distance • Integrated sun visor • Input Voltage 12 - 60V/DC +/-10% • Watertight molded
connectors

Multi (Serial) Cables (Standard) 7 Pin
Product Features: Orlaco Multi cable with a 7pins male to
a 7pins female connector • These standard cables can be used if no special requirements
like mechanical protection or dynamic movement of the cable is needed • All cables are

4-pin Output Video Switcher for Monitor
Part Number: 0404040
Product Features: Video Switcher - Inputs and power supply

specially developed by Orlaco engineering • EMC screening for optimum performance of
the equipment in crowded areas w/electromagnetic noise • Resistant to oil and petrol •
Operating temperature -40°C to +85°C • Watertight molded cable connectors
Special lengths or versions are available upon request
Part Number: 0304410 - 6m
Part Number: 0304610 - 11m
Part Number: 0304620 - 16m
Part Number: 0305030 - 21m

for three cameras and in combination with a Y-split cable for
4 cameras • 4 pins output for monitor • Cameras can be switched over automatically or
manually • Waterproof IP54 according to IEC 60529

ATVC Water Hose
Part Number: 2270140
Product Features: Hose to connect the water pump with the
ATVC camera • Maximum length between the pump and the camera is 11m • The water
hose can be ordered per meter • .4mm inside / .7mm outside

Call us at 800.726.2636

53

Visit us at www.panapacific.com

Truck & Safety Components

Waterproof Rear View Color CMOS Camera
with Night Vision LEDs
Part Number: C120

7" Color LCD Quad View Safety Camera Monitor
with 4 Camera Inputs
Part Number: M140C4
Product Features: 7" Touch Color TFT-LCD monitor

Product Features: 1/3" Color CMOS Sensor • Built-in 18 IR LEDs for improved night
vision • Built-in waterproof microphone • Reverse image picture • Waterproof housing •
Adjustable mount and sun shield • Waterproof cable connection • Operating Temperature:
-20C to 70C (Relative humidity 95%) • Storage Temperature: -40C to 80C (Relative
humidity 95%)

with wide viewing angle • Four camera inputs with reverse and turn signal triggering for
automatic camera switching • Multiple viewing modes • Rear camera inputs supports back
up cameras with audio • Front panel 3.5mm audio/video input for portable A/V devices •
Built-in speaker for rear camera audio and front panel A/V inputs • Manual normal image
and mirror image monitor view switching • Unlimited mounting applications • Includes:
remote control, detachable sun shield, U-bracket for dash top or overhead mounting, and
multi-directional pedestal mount

Left Side View Color CMOS Camera in Black Housing
Part Number: C-SDL-CMOS
Product Features: Custom side mount 1/3" color CMOS camera • Specifically designed
for left side mounting • Waterproof camera and housing • Reverse image • Night vision •
92° - 120° viewing angle • Easy mounting • Paintable housing

Rear View Color CMOS Camera Kit for Kenworth
NavPlus® System or Peterbilt SmartNav® System
Part Number: PP804395
Product Features: 1/3" Color CMOS Sensor • Built-in 18
IR LEDs for improved night vision • Built-in waterproof mic • Reverse image picture •
Waterproof housing • Adjustable mount & sun shield • Waterproof cable connection •
Operating Temperature: -20C to 70C (Relative humidity 95%) • Storage Temp: -40C to
80C (Relative humidity 95%) • Includes: 70' Extender Cable (Part No. RRC-70) and Camera
Display Adapter (Part No. PP204391) for installation with the Kenworth NavPlus® System
or the Peterbilt SmartNav® System • NOTE: Installation requires a P92-8387 harness SOLD
SEPARATELY through PACCAR Parts. Only one (1) P92-8387 harness is required per truck
regardless of the number of cameras on the truck - the harness has one plug that connects
to the back fo the NavPlus or SmartNav head unit, and four connectors to which cameras
can be added.

Right Side View Color CMOS Camera in Black Housing
Part Number: C-SDR-CMOS
Product Features: Custom side mount 1/3" color CMOS camera • Specifically designed
for right side mounting • Waterproof camera and housing • Reverse image • Night vision •
92° - 120° viewing angle • Easy mounting • Paintable housing

Right Side View Color CMOS Camera in Black
Housing for Kenworth NavPlus® System or Peterbilt
SmartNav® System
Part Number: PP804396
Product Features: Custom side mount 1/3" color CMOS

Heavy-Duty Trailer Pro-View Camera Cable
Part Number: CAM-HDT-PLA
Product Features: Cable stretches to 10' in length •
Compatible w/Pro-View Camera Systems • Kit includes panel
mount quick disconnect sockets w/spring mounted covers for both
tractor and trailer, and coiled cable with connectors • Connects
any trailer mounted camera with any tractor mounted monitor

camera • Specifically designed for right side mounting • Waterproof camera and housing
• Reverse image • Night vision • 92° - 120° viewing angle • Easy mounting • Paintable
housing • Includes: 16' Extender Cable (Part No. RRC-16) and Camera Display Adapter
(Part No. PP204391) for installation with the Kenworth NavPlus® System or the Peterbilt
SmartNav® System • NOTE: Installation requires a P92-8387 harness SOLD SEPARATELY
through PACCAR Parts. Only one (1) P92-8387 harness is required per truck regardless of
the number of cameras on the truck - the harness has one plug that connects to the back
fo the NavPlus or SmartNav head unit, and four connectors to which cameras can
be added.

7" Color LCD Monitor with 1 Camera Input
Part Number: M115C
Product Features: 7" Color LCD monitor with wide viewing
angle • One PAL/NTSC camera input • One A/V input • Built-in speaker • Full function remote
control • Accessories included: Universal pedestal mount, Flush in-dash mounting housing,
Power/camera input harness and remote control

Left Side View Color CMOS Camera in Black
Housing for Kenworth NavPlus® System or Peterbilt
SmartNav® System
Part Number: PP804397
Product Features: Custom side mount 1/3" color CMOS
camera • Specifically designed for left side mounting • Waterproof camera and housing
• Reverse image • Night vision • 92° - 120° viewing angle • Easy mounting • Paintable
housing • Includes: 16' Extender Cable (Part No. RRC-16) and Camera Display Adapter
(Part No. PP204391) for installation with the Kenworth NavPlus® System or the Peterbilt
SmartNav® System • NOTE: Installation requires a P92-8387 harness SOLD SEPARATELY
through PACCAR Parts. Only one (1) P92-8387 harness is required per truck regardless of
the number of cameras on the truck - the harness has one plug that connects to the back
fo the NavPlus or SmartNav head unit, and four connectors to which cameras can
be added.

7" Color LCD Monitor with 3 Camera Inputs
Part Number: M130C
Product Features: 7" Color LCD monitor with wide viewing
angle • Three PAL/NTSC camera inputs • One front panel mount
A/V input for games • Built-in speaker • Mirror and normal image switch • Button-controlled
brightness • Full function remote control • Accessories included: Sun shield and U-bracket,
Universal pedestal mount, Flush in-dash mounting housing, Power/camera input harness and
remote control

Visit us at www.panapacific.com

54

Call us at 800.726.2636

Truck & Safety Components
Gauges / Clocks
Digital Alarm Clock - Green Illumination
Part Number: PP604194
Product Features: Green Illumination • Snooze • Auto Time Advance

Front View Color CMOS Camera Kit for Kenworth
NavPlus® System or Peterbilt SmartNav® System
Part Number: PP804430
Product Features: 1/3" Color CMOS Sensor • Built-in 18

• Alarm On Indicator • Protected Alarm & Time Set Feature • One Touch
Backlighting Operation • Auto Alarm Stop after One Minute • PM Indicator • 2" in diameter

IR LEDs for improved night vision • Built-in waterproof mic • Reverse image picture •
Waterproof housing • Adjustable mount/sun shield • Waterproof cable connection •
Operating Temp: -20C to 70C (Relative humidity 95%) • Storage Temp: -40C to 80C
(Relative humidity 95%) • Includes: 16' Extender Cable (Part No. RRC-16) and Camera
Display Adapter (Part No. PP204391) for installation w/Kenworth NavPlus® System or
Peterbilt SmartNav® System • NOTE: Installation requires a P92-8387 harness SOLD
SEPARATELY through PACCAR Parts. Only one (1) P92-8387 harness is required per truck
regardless of the number of cameras on the truck - the harness has one plug that connects
to the back fo the NavPlus or SmartNav head unit, and 4 connectors to which cameras can
be added.

Digital Temp Gauge - Amber Illumination w/Chrome Bezel
Part Number: PP604195
Product Features: Amber Illumination with Chrome Bezel • Standard
In-Dash Gauge • One Touch Backlighting Operation • Inside & Outside
Temperature • 16' Long Sealed Outside Sensor • Operation Range: -20° to +160° F •
Accuracy +/- 2 Degree Farenheit • Adjustable Temp Alarm Set w/Amber LED & Buzzer
Warning Alarm • 2" in diameter

Digital Alarm Clock - Green Illumination w/ Chrome Bezel
Part Number: PP604225
Product Features: Green Illumination w/Chrome Bezel • Snooze • Auto
Time Advance • Alarm On Indicator • Protected Alarm & Time Set Feature
• One Touch Backlighting Operation • Auto Alarm Stop after One Minute • PM Indicator • 2" in
diameter

Extender Cables for Pro-View Camera Systems
Product Features: Compatible w/Pro-View Camera Systems

Power Converters / Battery Chargers

• Extension cables can be added between any camera & the monitor to address extra long
vehicles or special cable routing requirements • Any combination of up to three cables can be
assembled as required • Total cable lengths of up to 150 feet (70' + 70' + 10') are possible
with no degradation of video signal

10' Extender Cable for Pro-View Camera Systems
Part Number: RRC-10
16' Extender Cable for Pro-View Camera Systems
Part Number: RRC-16

45 amps Onboard Intelligent Battery Charger/Converter
Part Number: IBC45
Product Features: 45amps • High efficiency • Fully

35' Extender Cable for Pro-View Camera Systems
Part Number: RRC-35

automated with 4 operating modes • Perfect when it comes to maintaining the batteries in
perfect condition • Allows the use of DC powered accessories like auxiliary A/C systems •
Offers a very precise monitoring of the battery bank state • Automatically adjusts output
voltage accordingly to supply a load or recharge batteries • Prevents gassing *Easy to
install using Tundra CM Series installation kits *Can be linked to Tundra Inverters for more
convenience in a long haul or work truck application

70' Extender Cable for Pro-View Camera Systems
Part Number: RRC-70

Dash Cameras

Driving Video Recorder
Part Number: VRP-110T
Product Features: Secures your cab and protects you

70 amps Onboard Intelligent Battery Charger/Converter
Part Number: IBC70
Product Features: 70amps • High efficiency • Fully

from fraudulent claims • Records everything you see and
(front)
(back) hear • 2.4" Display • 1080 Full HD 1920 x 1080 • HDMI
output • 180 Sec Auto File Protection • 130o Wide Angle Glass Lens & IR-Filter • Wide
Dynamic Range (WDR) • Storage time at 8G: 1.5 hours • Recording format MOV(H.264)
• Motion Detection for Emergency Recording • Driver Fatigue Alert • 470mAH Built-in
Battery • Swivel Cam lets you film the road or your cab • Operating Temp -10o C - 60o C
• Simple Installation - ready to use out-of-the-box • Includes: Driving recorder, suction
bracket, cigarette charger, software CD and 16GB Micro-SD

automated with 4 operating modes • Perfect when it comes to maintaining the batteries
in perfect condition • Allows the use of DC powered accessories like auxiliary A/C systems
• Offers a very precise monitoring of the battery bank state • Automatically adjusts output
voltage accordingly to supply a load or recharge batteries • Prevents gassing *Easy to
install using Tundra CM Series installation kits *Can be linked to Tundra Inverters for more
convenience in a long haul or work truck application

Driving Video Recorder with GPS
Part Number: VRP-112T
Product Features: Secures your cab and protects

80 amps Onboard Intelligent Battery Charger/Converter
Part Number: IBC80
Product Features: 80amps • High efficiency • Fully

you from fraudulent claims • Records everything you
see and hear • 2.4" Display • 1080 Full HD 1920 x 1080
• HDMI output • 180 Sec Auto File Protection • 130o Wide Angle Glass Lens & IR-Filter
• Wide Dynamic Range (WDR) • Built-in GPS Antenna • Storage time at 8G: 1.5 hours
• Recording format MOV(H.264) • Motion Detection for Emergency Recording • Driver
Fatigue Alert • Speed Limit Alert Setting • 470mAH Built-in Battery • Swivel Cam lets you
film the road or your cab • Operating Temp -10o C - 60o C • Simple Installation - Ready
to use out-of-the-box • Includes: Driving recorder, suction bracket, cigarette charger,
software CD and 16GB Micro-SD

(front)

(back)

Call us at 800.726.2636

automated with 4 operating modes • Perfect when it comes to maintaining the batteries
in perfect condition • Allows the use of DC powered accessories like auxiliary A/C systems
• Offers a very precise monitoring of the battery bank state • Automatically adjusts output
voltage accordingly to supply a load or recharge batteries • Prevents gassing *Easy to
install using Tundra CM Series installation kits *Can be linked to Tundra Inverters for more