NHTSA ID Number: 10180783
Manufacturer Communication Number: SA-007-20k
TSB/Document Date: 2020-10-05
Summary
MAZDA
CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ). General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources
Service Alert
Mazda North American Operations
Irvine, CA 92618-2922
Subject:
Service Alert No.: SA-007/20
MAZDA CONNECTED SERVICES - FREQUENTLY ASKED
QUESTIONS (FAQ)
Last Issued: 09/29/2020
BULLETIN NOTES
This service alert supersedes the previously issued service alert listed below. The changes are noted in
Red text.
Previous Service
Alert
Date(s) Issued:
SA-007/20
08/03/20, 06/16/20, 05/22/20, 05/18/20, 04/14/20,04/06/20, 03/11/20, 03/06/20,
02/27/20, 02/18/20 and01/10/20
SA-054/19
12/17/19 and 12/06/19
APPLICABLE MODEL(S)/VINS
2020-2021 Mazda3
2020-2021 CX-30
2021 CX-5
2021 CX-9
DESCRIPTION
Frequently Asked Questions (FAQ)
Index
General Questions
Setup and Getting Started
Registration / Enrollment
WI-FI General Information
WI-FI How-To
WI-FI Trial Period
Interacting With The App
Service Issues
Troubleshooting
Reception Level Inspection
Dealer Processes
Conditions for Remote Engine Start Will Not Function
Page 1 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
Last Issued: 09/29/2020
Conditions for Remote Engine Start Function Will turn engine OFF
Educational Videos
Resources
General Questions
FAQ
Answer
Like a personal assistant for your Mazda, access your vehicle's
health report, remotely start your engine, lock and unlock the
doors and more through the MyMazda app on your mobile
What is included in
device. All complimentary for the first three (3) years of
Connected Services?
ownership. The vehicle can also be equippped with in-car Wi-Fi
capabilities and provide access to emergency services like
automatic 911 dialing and roadside assistance.
Connected Services utilizes a built-in cellular data connection between the vehicle
and the MyMazda smartphone app, offering remote access to a variety of great
features, including:
What benefits come
1. Monitoring your vehicle status from nearly anywhere
with Connected
2. Remotely starting your vehicle from much farther away than key-fob-activated
Services?
remote start systems
3. Using Vehicle Finder to more easily find your vehicle; especially helpful when
parked in a large, crowded parking lot.
On which vehicles is
Connected Services
available?
Connected Vehicle Services are available on the applicable models shown at the
beginning of this Service Alert.
Other models to feature Connected Services have yet to be announced.
Applicable models (all trims) support Connected Services. Signal strength can be
How do I know my
checked on the Mazda Connect center display.
Mazda supports
On the Mazda Connect home screen, go to "Navigation" or "Entertainment" and
Connected Services?
look for the telematics icon at the bottom right of the screen.
Is Connected Services
Yes, Connected Services features are available on manual transmission vehicles.
available on manual
However, the remote engine start/stop feature is not available for manual
transmission
transmission vehicles.
vehicles?
When will the free
At time of RDR.
Connected Services
In the case of an RDR reversal, Mazda's systems will identify the final retail sales
and Wi-Fi trial
date for that VIN and restart the clock for the 3-year free trial.
periods be activated?
Page 2 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
Last Issued: 09/29/2020
Mazda is still working on introducing Connected Services and the official launch
When can I get
date is TBD.
Connected Service
However, if you install our MyMazda App and register your VIN, you will get push
for my 2019 Mazda3?
notifications when Connected Services becomes available.
Setup and Getting Started
FAQ
Answer
Is it mandatory to No, it is an optional service. However, if you do want
enroll in Connected to use Connected Services features, enrollment via
Services?
the MyMazda app is required.
If you are enrolled in Connected Services, you may
unsubscribe at any time via the MyMazda app, using
the following directions:
1. Go to “hamburger menu” (i.e., three vertical lines
How can I opt out of icon) on the top right of the app screen
Connected
2. Tap MyMazda
Services?
3. Tap My Vehicle
4. Tap on “more options menu” (i.e., three vertical
dots icon) on the top right of the app screen
5. Tap on “Unsubscribe Connected Services”
6. Confirm pop-up warning message
Is there a
Yes. While Connected Services is complimentary for the initial three (3) years from
subscription fee for
the original vehicle purchase date (i.e., RDR date), there is a fee after the 3 years.
Connected
The subscription fee after the complimentary period has yet to be determined.
Services?
Connected Services collects a variety of data, including:
Information at registration:
What data does
1. Personal information
Connected Services
1. Name
collect?
2. Address
3. Phone Number
Page 3 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
Last Issued: 09/29/2020
4. Email
2. Vehicle Information
1. Vehicle Identification Number (VIN)
2. Year Model
3. Current Mileage
4. Miles Driven per Day
5. Driving Condition
6. Preferred Dealer
Data transmitted from vehicle:
1. Event of an Accident
1. Location of accident
2. Status of vehicle
2. Vehicle Warning Events
1. Location where vehicle warning was issued
2. Status of vehicle
3. Vehicle Status
1. When the vehicle is turned off, the vehicle sends out status information
including fuel level, oil condition and warning lights
Smartphone Device:
1. IMEI (device ID) at login for security purposes
For more information:
Connected Services Terms Conditions
Connected Services Privacy Policy
CV Important Notice (Secondary Driver)
Personal information is collected at the time of MyMazda app registration,
including name, address, telephone number, email address and VIN. For more
How does
information on the data collected by Connected Services, please refer to the
Connected Services
Connected Services Terms Conditions and Privacy Policy.
collect customer
Connected Services Terms Conditions
data?
Connected Services Privacy Policy
CV Important Notice (Secondary Driver)
What does Mazda
do with data
collected by
Connected
Services?
Anonymized information may be used for product quality, data analysis, research
and product development. For more information on the data collected by
Connected Services, refer to the Connected Services Terms Conditions and Privacy
Policy. For more information on the data collected by Connected Services, refer to
the Connected Services Terms Conditions and Privacy Policy.
Connected Services Terms Conditions
Connected Services Privacy Policy
CV Important Notice (Secondary Driver)
Will my data be
deleted when I
All personal information and information that indirectly enables the customer
identification will be deleted. Anonymized information may be used for product
Page 4 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
unsubscribe from
Connected
Services?
Last Issued: 09/29/2020
quality, data analysis, research, and product development. For example, data
transmitted from your vehicle, such as Customer ID and VIN, will be stored and
utilized by Mazda after being disconnected from the customer information.
If I sell my Mazda,
will the next owner No, the new vehicle owner will not be able to view
be able to see my any of the previous owner’s data.
data?
Registration / Enrollment
FAQ
Answer
What if I’m already
If you’re already registered for a MyMazda account, you can simply enroll
registered for a MyMazda
another eligible vehicle to take advantage of Connected Services.
account?
How do I activate
Connected Services?
You can activate a Connected Services-equipped Mazda vehicle via the
MyMazda app. You will need to add your VIN and then read the entire
disclaimer and check "I Agree" or "I Disgree."
Page 5 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
Last Issued: 09/29/2020
1. After registering for a MyMazda account,
the Select Vehicle screen will appear. Tap
“Add Vehicle” and follow the onscreen
instructions to add your vehicle.
2. To enroll in Connected Services, tap
“Enroll” on the “My Vehicles” screen.
3. On the Connected Services Enrollment
screen, tap Start to begin the enrollment
process.
How do I enroll my
vehicle in Connected
Services?
4. Switch the ignition ON in your Mazda
vehicle.
5. Wait 30 seconds.
6. Tap Next.
Page 6 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
Last Issued: 09/29/2020
7. Tap Request to receive authorization
code on your vehicle’s Mazda Connect
center display.
8. Enter the authorization code in the
MyMazda app, then tap Submit.
NOTE: If the authorization code was not
received, check the reception level strength
on the mobile device and vehicle.
SeeReception Level Inspection. If weak,
move to a location with good strength and
retry.
9. After enrollment is successfully
processed and the vehicle is connected,
you will receive a push notification.
Page 7 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
How do I enroll a new
vehicle in Connected
Services?
Last Issued: 09/29/2020
Simply take the following steps to enroll
another vehicle in Connected Services:
1. From the MENU, tap MyMazda
2. Tap My Vehicle
3. On the Action tab, tap Add Vehicle
4. Tap Scan VIN and scan barcode with your
camera OR, if the barcode cannot be
scanned, tap Manually Enter VIN and enter
the VIN
5. Tap VALIDATE
What should I do when I
see a “(400C04)” error
message when I try to
Wait several minutes and try again.
enroll in Connected
Services?
Do I need an internet
connection to access
Connected Services?
Yes. The MyMazda app will not work without an internet connection.
When pairing the
MyMazda app to a
vehicle, does the
authorization code
expire?
Yes, the code expires after 5 minutes. If it
has expired, you can request a new
authorization code via the MyMazda app.
Simply return to Connected Services
Enrollment, proceed to the step “Request
Authorization Code,” then tap “Request.”
Page 8 of 25
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
09/30/2020 3:44 PM tlawrenc
Service Alert No.: SA-007/20
Last Issued: 09/29/2020
While both codes are for security purposes, they work differently:
What is the difference
between the two-way
authorization
validation code and the
authorization code?
1. Validation Code: Used for two-way authentication when you initially sign
into your MyMazda app account. This code is sent to the your smartphone
device via SMS. You will enter your validation code in to the MyMazda app
after receiving it via SMS during the app registration process.
2. Authorization Code: Used to pair your MyMazda account to the vehicle.
This code is sent to the vehicle’s head-unit display. You will then enter the
authorization code in to the MyMazda app after confirming it on the
vehicle’s head-unit display during Connected Services enrollment.
You can SIMULATE Connected Services functions in Guest Mode (not
connected to a vehicle) by simply selecting "Guest Mode" from the MyMazda
app login screen. Then, select applicable vehicle to see how Connected
Services features like Remote Start and Vehicle Status look on the MyMazda
What Connected Services
app.
functions can be accessed
Guest Mode also provides helpful features, including dealer search,
in Guest Mode?
recommended maintenance schedule, manuals and guides, Roadside
Assistance and a variety of other Menu options.
Register for a MyMazda account and enroll in Connected Services to
experience the full suite of features.
Can multiple users be
registered under the
same email address?
No, additional users must use email addresses that are not currently used on
the MyMazda app and MyMazda Web.
What about loaner
vehicles? Will the
Connected Services
functions be activated?
Connected Services functions can easily be activated on applicable models via
the MyMazda app, even a loaner. If a customer utilizing the loaner activates
their phone, after returning the loaner, the dealer (or next customer) can
override at any time via MyMazda app.
For security purposes, dealer processes will need to be in place to terminate
Connected Services from former driver when loaner vehicle is returned.
Can I register more than
one vehicle under the
same Mazda Connected
Services account?
Yes, you can register up to five (5) vehicles
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-007-20k
Replacement Service Bulletin Number:
MFR Communication Date: 2020-09-29
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT ADAPTIVE/MOBILITY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.