SUBJECT:

GROUP
ELE

MODEL
2019> and later
Multiple Models

NUMBER
209

DATE
September 2020

TECHNICAL SERVICE BULLETIN
SERVICE REMINDER SETTING RESET PROCEDURE
This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service
interval reminder alert that will display on the instrument cluster. The KDS is required to
change the setting from ‘Workshop’ to ‘Customer Mode’. During the KVID PDI, the first service
interval is set at 6,000 miles for Turbo engines and 7,500 miles for Non-Turbo engines. This
function can also be used if the customer decides they would like to set the service interval at
Severe vs Normal schedule that was set during the PDI. Dealers and customers should
always set the service interval as a reminder when the oil service and/or other maintenance are
performed. Follow the procedure listed in this TSB to properly set the cluster to customer
mode.

Kia Diagnostic System (KDS)

Printed TSB copy is for reference only; information may be updated at any time.
Always refer to KGIS for the latest information.
Circulate To:

X General Manager


X Service Advisors


X Technicians


X Service Manager


X Parts Manager


X Body Shop Manager  Fleet Repair


Page 2 of 4
SUBJECT:

TSB: SERVICE REMINDER SETTING RESET PROCEDURE

Service Reminder Setting Change Process:
1. Connect the VCI-II to the OBD-II
connector, located under the driver’s side
of the instrument panel.

2.

With the ignition ON, turn ON the KDS
tablet. Select KDS from the home
screen.

3.

Confirm communication with VCI (A) and
then configure the vehicle (B) using the
AUTO VIN (C) feature.

B
A

C
4.

Select Cluster Module, then Service
Reminder Setting (D) in 'S/W Management'
menu.

D

Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: ELE209 Multiple Models September 2020

Page 3 of 4
SUBJECT:

TSB: SERVICE REMINDER SETTING RESET PROCEDURE

5.

Change the Service Type, click 'OK' button.

6.

Select Customer (E) as a Service Type.

E

7.

Input the correct Mileage and Time, click
'OK' button.

8.

Change the setting value, click 'OK' button.

 NOTICE
Input the mileage & time following
the maintenance guide.

Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: ELE209 Multiple Models September 2020

Page 4 of 4
SUBJECT:

TSB: SERVICE REMINDER SETTING RESET PROCEDURE

WARRANTY INFORMATION:
N Code: B21 C Code: ZZ3
Claim
Type

Causal P/N

Qty.

Repair
Description

Labor Op Code

Op
Time

Replacement
P/N

Qty.

W

Refer to
EPC*

0

Service Reminder
Setting Change

94016F01

0.1
M/H

N/A

0

*Use the IP Cluster P/N using VIN search in the Snap-On EPC for the causal part number.
NOTE: ONLY ONE CLAIM CAN BE FILED PER VIN AND SHOULD BE SUBMITTED AT THE FIRST
OIL SERVICE INTERVAL

Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: ELE209 Multiple Models September 2020