Page 32 of 35
SR-20-003REV_1

Warranty / Recall Campaign Claim Information
Enter all claims as claim type ‘C’ – Recall/Campaign Claims
Please follow the campaign instructions below.
Certain affected vehicles:
2008
2009
2008
2011

– 2010 Lancer*
- 2010 Lancer Sportback*
- 2013 Outlander*
– 2016 Outlander Sport / RVR*

NOTE: Always check the Superscreen to verify vehicle involvement.

A claim example for reference:

LABOR AND PARTS
There are only 2 possible repair scenarios for this campaign.
Scenario 1
Inspect = OK - then, still must apply the 2 anti-rust agents only.
Scenario 2
Inspect = applicable corrosion - replace Crossmember. Do not apply anti-rust agent.A
Each can of the anti-rust agents is enough to complete 5 vehicles. Thus, the dealer net price for
each of the materials is priced at dealer net divided by 5 and will be reflected automatically when
entering the parts costs on the related recall campaign claim. Dealers will receive markup based
on the per vehicle material prices.A

Page 33 of 35
SR-20-003REV_1

REPLACED PARTS
Replaced parts must be held for at least 10 days beyond the recall claim payment date unless requested
to be returned to MMNA. Return requested parts as you would any return requested warranty replaced
part.

RENTAL CARS
If there is a need to provide the owner with a rental car or to claim return freight charges, claim the
applicable charges in this section of the claim on the lower portion of the labor entry screen.

Page 34 of 35
SR-20-003REV_1

Page 35 of 35

Compliant SDS for GHS - Canada WHMIS 2015

SAFETY DATA SHEET
Nox-Rust® 712AM

Section 1. Identification
Product identifier
Other means of
identification
Product type

: Nox-Rust® 712AM
: Not available.

Identified uses

: Corrosion Preventive Compound.

Supplier/Manufacturer

: Würth Canada Limited
6330, Tomken Road
Mississauga, ONT
L5T 1N2, Canada
Tel: (905) 564-6225

Emergency telephone
number (with hours of
operation)

: CANUTEC: +1-613-996-6666 or *666 (cellular)
(24/7)

: Liquid.

Section 2. Hazard identification
Classification of the
substance or mixture

GHS label elements
Hazard pictograms

Signal word
Hazard statements

: TOXIC TO REPRODUCTION (Fertility) - Category 1
TOXIC TO REPRODUCTION (Unborn child) - Category 1
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2
ASPIRATION HAZARD - Category 1
AQUATIC HAZARD (ACUTE) - Category 2
AQUATIC HAZARD (LONG-TERM) - Category 2

:

: Danger
: H360 - May damage fertility or the unborn child.
H304 - May be fatal if swallowed and enters airways.
H373 - May cause damage to organs through prolonged or repeated exposure.
H411 - Toxic to aquatic life with long lasting effects.

Precautionary statements

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com

1/11

Nox-Rust® 712AM

Section 2. Hazard identification
Prevention

Response

Storage
Disposal
Other hazards which do not
result in classification/
HHNOC/PHNOC

: P201 - Obtain special instructions before use.
P202 - Do not handle until all safety precautions have been read and understood.
P280 - Wear protective gloves. Wear eye or face protection. Wear protective
clothing.
P273 - Avoid release to the environment.
P260 - Do not breathe vapor.
: P391 - Collect spillage.
P314 - Get medical attention if you feel unwell.
P308 + P313 - IF exposed or concerned: Get medical attention.
P301 + P310 + P331 - IF SWALLOWED: Immediately call a POISON CENTER or
physician. Do NOT induce vomiting.
: P405 - Store locked up.
: P501 - Dispose of contents and container in accordance with all local, regional,
national and international regulations.
: None known.

Section 3. Composition/information on ingredients
Substance/mixture
Other means of
identification

: Mixture
: Not available.

CAS number/other identifiers
CAS number
: Not applicable.
Product code
: Not available.
Ingredient name

% (w/w)

CAS number

White mineral oil (petroleum)
Sulfonic acids, petroleum, calcium salts, overbased
Castor oil, dehydrated, polymd.

10 - 30
3-5
3-5

8042-47-5
68783-96-0
68038-02-8

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.

Section 4. First-aid measures
Description of necessary first aid measures
Eye contact
: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 20
minutes. Get medical attention.
Inhalation
: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If not breathing, if breathing is irregular or if respiratory arrest occurs, provide
artificial respiration or oxygen by trained personnel. It may be dangerous to the
person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If
unconscious, place in recovery position and get medical attention immediately.
Maintain an open airway.
Skin contact
: Flush contaminated skin with plenty of water. Wash contaminated clothing
thoroughly with water before removing it, or wear gloves. Continue to rinse for at
least 20 minutes. Get medical attention. Wash clothing before reuse. Clean shoes
thoroughly before reuse.

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com

2/11

Nox-Rust® 712AM

Section 4. First-aid measures
Ingestion

: Get medical attention immediately. Call a poison center or physician. Wash out
mouth with water. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. If material has been swallowed and the exposed person
is conscious, give small quantities of water to drink. Stop if the exposed person
feels sick as vomiting may be dangerous. Aspiration hazard if swallowed. Can
enter lungs and cause damage. Do not induce vomiting. If vomiting occurs, the
head should be kept low so that vomit does not enter the lungs. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery
position and get medical attention immediately. Maintain an open airway.

Most important symptoms/effects, acute and delayed
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
: No known significant effects or critical hazards.
Skin contact
: No known significant effects or critical hazards.
Ingestion
: May be fatal if swallowed and enters airways.
Over-exposure signs/symptoms
Eye contact
: No known significant effects or critical hazards.
Inhalation
: Adverse symptoms may include the following:
reduced fetal weight
increase in fetal deaths
skeletal malformations
Skin contact
: Adverse symptoms may include the following:
reduced fetal weight
increase in fetal deaths
skeletal malformations
Ingestion
: Adverse symptoms may include the following:
nausea or vomiting
reduced fetal weight
increase in fetal deaths
skeletal malformations
Indication of immediate medical attention and special treatment needed, if necessary
Notes to physician
: Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments
: No specific treatment.
Protection of first-aiders
: No action shall be taken involving any personal risk or without suitable training. If it
is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing
thoroughly with water before removing it, or wear gloves.
See toxicological information (Section 11)

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com

3/11

Nox-Rust® 712AM

Section 5. Fire-fighting measures
Extinguishing media
Suitable extinguishing
media
Unsuitable extinguishing
media
Specific hazards arising
from the chemical
Hazardous thermal
decomposition products
Special protective actions
for fire-fighters
Special protective
equipment for fire-fighters

: Use an extinguishing agent suitable for the surrounding fire.
: None known.

: This material is toxic to aquatic life with long lasting effects. Fire water contaminated
with this material must be contained and prevented from being discharged to any
waterway, sewer or drain.
: No specific data.

: No special measures are required.
: Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency
: No action shall be taken involving any personal risk or without suitable training.
Keep unnecessary and unprotected personnel from entering. Do not touch or walk
personnel
through spilled material. Avoid breathing vapor or mist. Provide adequate
ventilation. Wear appropriate respirator when ventilation is inadequate. Put on
appropriate personal protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
Environmental precautions

: Avoid dispersal of spilled material and runoff and contact with soil, waterways,
drains and sewers. Inform the relevant authorities if the product has caused
environmental pollution (sewers, waterways, soil or air). Water polluting material.
May be harmful to the environment if released in large quantities. Collect spillage.

Methods and materials for containment and cleaning up
Spill
: Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas.
Wash spillages into an effluent treatment plant or proceed as follows. Contain and
collect spillage with non-combustible, absorbent material e.g. sand, earth,
vermiculite or diatomaceous earth and place in container for disposal according to
local regulations (see Section 13). Dispose of via a licensed waste disposal
contractor. Contaminated absorbent material may pose the same hazard as the
spilled product. Note: see Section 1 for emergency contact information and Section
13 for waste disposal.

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com

4/11

Nox-Rust® 712AM

Section 7. Handling and storage
Precautions for safe handling
Protective measures
: Put on appropriate personal protective equipment (see Section 8). Avoid exposure obtain special instructions before use. Avoid exposure during pregnancy. Do not
handle until all safety precautions have been read and understood. Do not get in
eyes or on skin or clothing. Do not breathe vapor or mist. Do not swallow. Avoid
release to the environment. If during normal use the material presents a respiratory
hazard, use only with adequate ventilation or wear appropriate respirator. Keep in
the original container or an approved alternative made from a compatible material,
kept tightly closed when not in use. Empty containers retain product residue and
can be hazardous. Do not reuse container.
Advice on general
occupational hygiene

Conditions for safe storage,
including any
incompatibilities

: Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. See also Section 8 for additional information on hygiene
measures. Remove contaminated clothing and protective equipment before entering
eating areas.
: Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials (see Section 10) and food and drink. Store locked up. Keep container
tightly closed and sealed until ready for use. Containers that have been opened
must be carefully resealed and kept upright to prevent leakage. Do not store in
unlabeled containers. Use appropriate containment to avoid environmental
contamination.

Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
Ingredient name

Exposure limits

White mineral oil (petroleum)

CA British Columbia Provincial (Canada, 5/2015).
TWA: 1 mg/m³ 8 hours.
CA Alberta Provincial (Canada, 4/2009).
8 hrs OEL: 5 mg/m³ 8 hours. Form: Mist
15 min OEL: 10 mg/m³ 15 minutes. Form: Mist
CA Ontario Provincial (Canada, 7/2015).
TWA: 5 mg/m³ 8 hours. Form: Mist
STEL: 10 mg/m³ 15 minutes. Form: Mist
CA Quebec Provincial (Canada, 1/2014).
TWAEV: 5 mg/m³ 8 hours. Form: Mist
STEV: 10 mg/m³ 15 minutes. Form: Mist

Appropriate engineering
controls
Environmental exposure
controls

: If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,
local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits.
: Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation.

Individual protection measures
Hygiene measures
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com

5/11

Nox-Rust® 712AM

Section 8. Exposure controls/personal protection
Eye/face protection

Skin protection
Hand protection

Body protection

Other skin protection

Respiratory protection

: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: safety glasses with
side-shields.
: Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
: Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
: Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.

Section 9. Physical and chemical properties
Appearance
Physical state
Color
Odor
Odor threshold
pH
Melting point
Boiling point
Flash point
Evaporation rate
Flammability (solid, gas)
Lower and upper explosive
(flammable) limits
Vapor pressure
Vapor density
Relative density
Solubility
Partition coefficient: noctanol/water
Auto-ignition temperature
Decomposition temperature
Viscosity

:
:
:
:
:
:
:
:
:
:
:

Liquid. [Viscous.]
Yellowish brown.
Fat and Oil.
Not available.

:
:
:
:
:

Not available.

Not available.
482°F)