2021

TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Guided Fault Finding must be used, session must be completed and sent to GFF Paperless
 Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test)
 Start Guided Fault Finding with the engine running to ensure control modules in transport mode are identified
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Verify inflatable repair kit and compressor are present (TT
RS only)

 Verify Audi phone box customer registration form is present
in vehicle and add the serial number from Elsa (if equipped).
See TSB 2051720

 Set spare tire pressure (NA for TT RS)*
 Check battery clamps for proper torque*

 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*

Interior

 Perform any open campaigns*

 Verify operation of all seat belts and latches

 Perform diagnostics work*

 Check operation of window, lock, and seat controls*

 Install front license plate carrier (if necessary)*

 Inspect mirrors for proper operation*

Exterior
 Check all key buttons and features*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
Lighting and Windshield

 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation heated seats
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Verify operation of front Passenger Occupant Detection
System

 Test exterior lighting functions
 Test windshield washers. Correct aim if necessary*

Settings
 Verify operation of MMI®

Trunk Inspection
 Verify trunk is operational
 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
Effective 6-30-2020-US
Version 1.0

 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Entertain. Fad.” in Parking aid to an audible level*
PRE-DELIVERY INSPECTION (PDI) | 1

2021

TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance (continued)

 Set dealership location in navigation (if equipped)*

 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer

 Turn off Manual Speed Warning (if equipped)*

 Verify quality of radio reception in AM/FM/SiriusXM® bands

Media / Radio / SAT
 Verify operation of aux. input (if equipped)

Driver Assistance

 Verify operation of CD/DVD player

 Verify cruise control

 Insert SD card and test function of slot
 Program the presets to local stations

 Verify Audi side assist functionality with rear cross traffic
alert (if equipped)

 Verify HD Radio is turned “off”*

 Verify operation of Audi parking system plus*

On-Hoist Inspection

 Activate NAV and follow directions back to dealership (if
equipped)

 Remove transport suspension blocks (follow ELSA instruction)

Roadster Functionality (if equipped)

 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Test operation of power folding top*
 Verify convertible top manual closing tools are present
Post-Road Test Inspection
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed
 Check engine oil level*
 Check all fluid levels and top off if necessary

Driving Performance
 Check horn operation

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Verify hold and release of electronic parking brake

 Apply 30 Day Inventory Maintenance Sticker**

 Verify engine performance and acceleration*

 Install showroom charger to ensure battery remains
charged at all times**

 Verify transmission operation, including shift paddles (if
equipped)

 Must fuel with 91 Octane or higher (TTS, TT RS)

 Test drive vehicle applying brakes several times*
 Verify rear spoiler functionality (if equipped)
 Check steering/tire alignment

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 6-30-2020-US
Version 1.0

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2