Loading...

NHTSA ID Number: 10176738

Manufacturer Communication Number: D20M4REV1

TSB/Document Date: 2020-06-26


Summary

Revision for DDC Field service campaign for GHG17 Detroit DD13 engines requiring software reprogramming and new emission label replacement. This field service applies only to MCIeBay logo (Motor Coach IndustrieseBay logo) vehicles. Several sections were corrected for missing or incomplete information.


Daimler TruckseBay logo
North America LLC

Field Service Campaign

March 2020
D20M4 Rev

Subject: GHG17 DETROITTM DD13® Software Reprogramming and Emission Label
Replacement for Motor Coach IndustrieseBay logo, Inc. (MCIeBay logo®) Revision 1
Models Affected: GHG17 DD13 Engines in MCIeBay logo® Applications

General Information
Daimler TruckseBay logo North America LLC, on behalf of its DETROITTM Powertrain Division, is initiating Field
Service Campaign D20M4 to modify the vehicles mentioned above.
Certain DETROIT™ GHG17 DD13® engines installed in MCIeBay logo® vehicles will require reprogramming to a
minimum of the software versions listed below.


MCM Software Version 6.8.0.1
ACM Software Version 7.60.2.0
CPC Software Version R44_00_000A

All affected units in this campaign will need their emission label replaced. This includes engines with test
emission labels AND engines with certified emission labels.
Updated software and certified emission labels became effective with GHG17 DD13® engines
manufactured after January 1, 2020. GHG17 DD13® engines manufactured before January 1, 2020, will
need the MCM, ACM, and CPC reprogrammed and the emission label replaced.
The updated software includes improvements for the following fault codes.



SPN: 3216/FMI 16: Selective Catalyst Reduction Inlet NOx Sensor - Drift High (MCM Only)
SPN: 520371/FMI 16: Selective Catalyst Reduction Closed Loop Control at Maximum Limit
(Multiples Sources)
SPN: 520372/FMI 14: Selective Catalyst Reduction Closed Loop Control at Maximum Limit
(Timeout)
SPN: 520372/FMI 16: Selective Catalyst Reduction Closed Loop Control at Maximum Limit

Depending on the level of the currently installed software, the update may also include improvements for
fault codes SPN 1636/FMI 16 and SPN 2659/FMI 0.
There are approximately 630 engines affected by this Field Service Campaign.

Work Instructions
Please refer to the attached work instructions.

Daimler TruckseBay logo
North America LLC

Field Service Campaign

March 2020
D20M4 Rev

Replacement Parts
Replacement parts are now available and can be obtained from the Order Center on DTNA Connect. Refer
to Certified Emission Label Ordering Instructions on page 15. All vehicles involved in this campaign
will require a replacement emission label. This includes units currently equipped with test emission
labels AND units equipped with certified emission labels.
Important: The Emission Certification Label must be ordered before the customer arrives to avoid
unnecessary downtime. Please allow 2 to 3 days for label shipment.

Fig. 1, Sample Emission Labels

Table 1 – Replacement Parts for D20M4
Campaign
Number
D20M4

Page 2

Part Number

Part Description

Qty per Kit

See Page 15 For
Ordering Instructions

Certified Emission Label

1

Daimler TruckseBay logo
North America LLC

Field Service Campaign

March 2020
D20M4 Rev

Removed Parts
The emission label is designed to be removed in pieces. After replacement, the removed label must be
attached to the certified emission label check sheet. Attach an image of the filled out check sheet, with the
removed label, to the warranty claim. Refer to Work Instructions for further direction.

Labor Allowance
NOTE: Reference Pages 13-14, "Work Instructions", Step 20. The "Certified Emission Label Check Sheet"
MUST BE ATTACHED to the claim in the Online Warranty Link (OWL) System.
Table 2 – Labor Allowance for D20M4
Procedure

Time Allowed
(hours)

SRT Number

Corrective Action

D20M4
No Reprogramming Required,
Install Emission Label,
Perform Regen (x2) and SCR Eff Test(s)

3.0 hours

996-F202A

12-Repair
Recall/Campaign

Reprogram MCM/CPC/ACM,
Install Emission label,
Perform Regen (x2) and SCR Eff Test(s)

3.6 Hours

996-F202B

12-Repair
Recall/Campaign

No Reprogramming Required With
Additional Regen,
Install Emission Label,
Perform Regen (x3) and SCR Eff Test(s)
Reprogram MCM/CPC/ACM
With Additional Regen,
Install Emission label,
Perform Regen (x3) and SCR Eff Test(s)

3.7 hours

996-F202C

12-Repair
Recall/Campaign

4.3 Hours

996-F202D

12-Repair
Recall/Campaign

Page 3

Daimler TruckseBay logo
North America LLC

Field Service Campaign

March 2020
D20M4 Rev

Claim Reimbursement
NOTE: Reference Pages 13-14, "Work Instructions", Step 20. The "Certified Emission Label Check Sheet"
MUST BE ATTACHED to the claim in the Online Warranty Link (OWL) System.
You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting
your claim through the Warranty system within 30 days of completing this campaign. Please reference the
following information in OWL:

Claim Type
Campaign
(number with appropriate condition code)
Component Code
Cause Code
Primary Failed Part

Field Service Campaign
D20M4
044-003-286
A1-Campaign
DDC REPROGRAM1
Procedure A1

Use this operation if programming was NOT REQUIRED.
Labor Number

996-F202A
No Reprogramming Required,
Install Emission Label,
Perform Regen (x2) and SCR Eff Test(s)

Labor Hours

3.0 Hours

Part Number

DDC REPROGRAM1

Parts Return

NONE
Procedure B1

Use this operation if programming was REQUIRED.
Labor Number

Page 4

996-F202B
Reprogram MCM/CPC/ACM,
Install Emission label,
Perform Regen (x2) and SCR Eff Test(s)

Labor Hours

3.6 Hours

Part Number

DDC REPROGRAM1

Parts Return

NONE

Daimler TruckseBay logo
North America LLC

Field Service Campaign

March 2020
D20M4 Rev

Procedure C1
Use this operation if programming was NOT REQUIRED but a third regen was required at step 14.
Labor Number

996-F202C
No Reprogramming Required
With Additional Regen,
Install Emission Label,
Perform Regen (x3) and SCR Eff Test(s)

Labor Hours

3.7 Hours

Part Number

DDC REPROGRAM1

Parts Return

NONE
Procedure D1

Use this operation if programming was REQUIRED and a third regen was required at step 14.
Labor Number

1

996-F202D
Reprogram MCM/CPC/ACM
With Additional Regen,
Install Emission label,
Perform Regen (x3) and SCR Eff Test(s)

Labor Hours

4.3 Hours

Part Number

DDC REPROGRAM1

Parts Return

NONE

Administrative time (SRT 939-6010A) for 0.3 hours is automatically added to the claim.

This Field Service Campaign will terminate on March 13, 2021. Dealers will be notified of any changes
IMPORTANT: OWL must be viewed prior to beginning work to ensure the vehicle is involved and the
campaign has not previously been completed.
All claims must be submitted within 30 days of the repair and within 30 days of the termination date of the
campaign
For questions, U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry
at DTNAConnect.com / WSC, or the Customer Assistance Center at (800) 385-4357. Export distributors
submit a Web inquiry or contact your InternationaleBay logo Service Manager.

Page 5

Daimler TruckseBay logo
North America LLC
March 2020
D20M4 Rev

Field Service Campaign
Detroit Diesel Corporation
13400 Outer Drive, West
Detroit, Michigan 48239-4001
Telephone: 313‐592‐5000

**Copy of Notice to Owner**

Subject: Field Service Campaign D20M4

GHG17 DETROIT™ DD13® Software Reprogramming and Emission Label
Replacement for Motor Coach IndustrieseBay logo, Inc. (MCIeBay logo®)

Daimler TruckseBay logo North America LLC, on behalf of its Detroit Diesel Powertrain Division, is initiating Field
Service Campaign D20M4 to modify the vehicles mentioned above.
Certain DETROIT™ GHG17 DD13® engines installed in MCIeBay logo® vehicles will require reprogramming. All
affected units in this campaign will need their emission label replaced. This includes engines with test
emission labels AND engines with certified emission labels.
Updated software and certified emission labels became effective with GHG17 DD13® engines
manufactured after January 1, 2020. GHG17 DD13® engines manufactured before January 1, 2020, will
need the MCM, ACM, and CPC reprogrammed and the emission label replaced.
Records available to us indicate that your vehicle has one of the eligible engines. Instructions for this
Field Service Campaign have been sent to your local Detroit Diesel Authorized Repair Facility and the
labor time required to perform this campaign is approximately 3.6 hours.
Please contact a Detroit Diesel Authorized Repair Facility to arrange to have the Field Service Campaign
performed. To locate an authorized facility, search online at https://demanddetroit.com/find-a-dealer/

12

SaleBestseller No. 1
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Bestseller No. 2
Mini vci j2534 Cable v18.00.008, obd2 Scanner Adapter for gm tech 2, obdlink ex, USB, fixd car Diagnostic Tool, Diagnostic Scanner, j2534 reprogramming Tool Supports Win xp win7 win10
15 Reviews
Mini vci j2534 Cable v18.00.008, obd2 Scanner Adapter for gm tech 2, obdlink ex, USB, fixd car Diagnostic Tool, Diagnostic Scanner, j2534 reprogramming Tool Supports Win xp win7 win10
  • Replace Part Number: for ‎FCAN033JAP
  • [Compatible with] Compatible More Vehicles, Supported...
  • [Package included] 1pc x MINIeBay logo VCI 16Pin Cable 1pc x CD...
  • Widely Compatible, for VCI j2534 cable supports for TIS...
  • Install Note, Any installation problems, please contact us...

Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API


 

If the PDF is very large, it may not load in the preview below.

Download PDF [1.23 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: D20M4REV1

Replacement Service Bulletin Number:

MFR Communication Date: 2020-06-25

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
Launch OBD2 Scanner CRP123X V3.0 Elite, 2026 Lifetime Free WiFi Update Scan Tool, FCA SGW, CANFD&DoIP, SAS/Throttle/Brake/BMS/D-P-F/Oil/ABS Service Multi Systems Car Scanner, Battery Test, Auto VIN
  • [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
  • 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and ChryslereBay logo models, as well as DoIP for V.olvo, Land RovereBay logo/JaguareBay logo, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCAeBay logo cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data.
  • 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
  • [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
  • [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis(or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
SaleBestseller No. 2
Launch X431 PRO3 V+ Elite, 2026 SmartlinkC 2.0 Bidirectional Scan Tool with J2534 Portocol, HD Trucks Scanner, 10.1 inch, Topology Map, 60+Service, Online Code, CANFD/DoIP/D-PDU, FCA, 2 Yrs Update
  • [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
  • [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for ToyotaeBay logo, HondaeBay logo, VWeBay logo, BMWeBay logo, FordeBay logo, GM, ChryslereBay logo, Mercedes-BenzeBay logo and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
  • [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
  • [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
  • [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land RovereBay logo/JaguareBay logo, BMWeBay logo F/G chassis, GM, etc.; 2) FCAeBay logo Autoauth, covering 2018+ ChryslereBay logo/DodgeeBay logo/FiateBay logo, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
SaleBestseller No. 3
LAUNCH X431 CRP919EBT 2026 Wireless Bidirectional Scan Tool, All-in-One Full System OBD2 Scanner, ECU Coding, 35+ Services, CANFD&DOIP, FCA AutoAuth, VAG Guide, 2Yrs Free Update, Upgraded of CRP919E
  • 🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE,UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAMeBay logo+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCAeBay logo AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
  • 🚗【CAN FD & DOIP & FCAeBay logo, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMWeBay logo (E & F chassis) models from 2017 onward. Autoauth for FCAeBay logo SGW supports FCAeBay logo vehicles including ChryslereBay logo models from 2017 and later.
  • ✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers ‌exceptional ECU code capabilities‌ for customized vehicle setups. It provides ‌dealer-level functionality‌ to streamline maintenance and repairs, enabling ‌ECU matching and learning for enhanced customization.
  • 👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
  • 🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.

Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...