Installation and Conversion Instructions

Macan (95B)
10/20

ENU

9193

9

Apple CarPlay® Interface

Retrofitting

Information:

Figure 1
Model Year:

As of 2019

Notes:

After enabling the Apple CarPlay® interface in the vehicle, iPhone® apps can also be used in the Porsche
Communication Management (PCM) of the vehicle.
The following requirements must be met in order to use this function:
•
•

At least iPhone® 5 or a newer device with iOS® 7.1 or later software
Availability of Apple CarPlay®

You will find information about the available regions at https://support.apple.com.

Part Info:

95B.044.900.07

Tools:

9900 - PIWIS Tester 3

Coding:

1

 License key for Apple CarPlay®

Coding/Programming Apple CarPlay®

NOTICE
Voltage drop
•

Risk of irreparable damage to control unit

Tequipment

May 5, 2020
Page 1 of 4

9

Macan (95B)
9193

ENU

Installation and Conversion Instructions

10/20

•

Risk of damage to control unit

•

Fault entries in the control unit

•

Coding in the control unit is aborted

•

Malfunctions in control unit, even during programming



Switch off the ignition and remove the ignition key before disconnecting the control unit.



Ensure that the power supply is not interrupted during programming.



Connect a battery charger with a current rating of at least Nominal value 90 A to the vehicle
battery.
1.1

Preparatory work – Coding
NOTICE

Control unit programming will be aborted if the Internet connection is unstable.
•

An unstable Internet connection can interrupt communication between PIWIS Tester
III and the vehicle communication module (VCI). As a result, control unit programming
may be aborted.



During control unit programming, always connect PIWIS Tester III to the vehicle
communication module (VCI) via the USB cable.
1.1.1

9900 - PIWIS Tester 3 must be connected to the vehicle and switched on.

1.1.2

Switch on ignition AND hazard warning lights on the vehicle.
Information
The 9900 - PIWIS Tester III instructions take precedence since the description
may be different with later Tester releases.
The procedure described here has been structured in general terms; different text
or additions may appear on the 9900 - PIWIS Tester III.

1.2

1.1.3

Select the "Diagnostics" menu item on the PIWIS Tester.

1.1.4

If 9900 - PIWIS Tester 3 is connected correctly, a connection to the vehicle will be
established: "Macan" model line is detected.

1.1.5

Press •F12“ to go to the control unit search screen.

1.1.6

Confirm the question: "Create vehicle analysis log (VAL)?" with "Yes" = •F12“.

Enabling Apple CarPlay®
1.2.1

May 5, 2020
Page 2 of 4

Select the "Function enable" function. Press •F12“ to continue.

Tequipment

Installation and Conversion Instructions

Macan (95B)
10/20

ENU

9193

9

Information
PIWIS Tester must be connected to the Porsche Partner Network (PPN) via WLAN
or data cable!
1.2.2

Enter PPN user name. Tap the password input field and enter the password. Select
"Login".

1.2.3

Select the "Enable" function. Press •F12“ to continue.

1.2.4

Touch the license number input field and enter the license number.
Press •F12“ to continue.

1.2.5

Confirm the "Apple CarPlay®" function by pressing •F12“.
Wait until the message "Functions have been enabled successfully." appears.

1.2.6

Press •F12“ to go to the "Overview" menu.
Select the "Display enabled functions" function. Press •F12“ to continue.
Wait until a table containing the enabled functions appears, e.g.:

Control unit

Function

PCM4 (001)

Apple CarPlay®

Status

Voice control
Sport Chrono
Bluetooth
Navigation
UAS (universal audio interface)
1.2.7

Press •F12“ to continue.
Press •F11“ to return to the "Overview" menu.

1.3

Adapt coding.
1.3.1

Press •F11“ to return to the list of control units.
Select all control units by pressing •Ctrl A“. Press •F12“ to continue.

1.3.2

Switch to the "Codings/adaptations" menu. Press •F12“ to continue.
Select "Automatic coding" mode. Press •F12“ to continue.

1.3.3

Wait until the message "Coding has been completed successfully" appears. Press
•F12“ to continue.
Switch to the "Overview" menu.

Tequipment

May 5, 2020
Page 3 of 4

9

Macan (95B)
9193

ENU

2

91 93 23 40:

10/20

Installation and Conversion Instructions

Concluding work
2.1

Read out the fault memory of all systems, work through any existing faults, and erase the
fault memory (  Workshop Manual '033500 Fault memory for on-board diagnosis').

2.2

Switch off the ignition and disconnect 9900 - PIWIS Tester 3.

2.3

Disconnect battery charger. (  Workshop Manual '2X00IN Battery trickle charging').

–Apple CarPlay® interface enabled–

Labor time: 77 TU

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.

© 2020 Porsche Cars North America, Inc.

May 5, 2020
Page 4 of 4

Tequipment