2014-2017 Rogue - AWD - Continued
DESCRIPTION

PART # PREFIX QUANTITY

SEAL - O RING (Fill-tube O-ring)

31084

1

WASHER - DRAIN PLUG (CVT drain plug gasket)

11026

1

SEAL - O RING (O-ring: CVT fluid overflow plug)

31526

1

SEAL - O RING
(Transfer case filler plug and drain plug gaskets)

11026

2

01223

2

2016-2017 Rogue AWD ONLY:
NUT (Outer socket nuts)

96/103

NTB16-110n

CONTROL VALVE REPLACEMENT

DESCRIPTION

PART #

QUANTITY

VALVE ASSY KIT - CONTROL (Valve body)

3170E-28X0B

1

Valve Assy Kit - Control includes:
VALVE ASSEMBLY - CONTROL (1)
STRAINER ASSY - OIL, AUTO TRANS
BRACKET (Temperature sensor bracket)
BAND (Zip tie for bracket)
GSKT - OIL PAN
SEAL - LIP (Between CVT and control valve)
Seal, O-Ring (Fluid filler plug gasket)

1
1
1
1
1
1
1

Nissan NS-3 CVT Fluid (2) (3)

999MP-CV0NS3

As needed

Transmission Cooler Cleaner (2)

999MP-AM006P

As needed

(1) Includes QR label, CD-R, and control valve assembly.
(2) This item can be ordered through the Nissan Maintenance Advantage program: Phone:
877-NIS-NMA1 (877-647-6621) or Website: Order via link on dealer portal
www.NNAnet.com and click on the “Maintenance Advantage” link.
(3) For warranty repairs, Nissan NS-3 CVT Fluid must be used. For customer pay repairs,
Nissan NS-3 CVT Fluid or an equivalent is recommended.

****Single use parts that are not included in the above kit****
DESCRIPTION

PART # PREFIX

QUANTITY

CLAMP (CVT fluid cooler hose clamps)

21639

2

GASKET (CVT drain plug gasket)

11026

1

SEAL - O RING (O-ring: CVT fluid overflow plug)

31526

1

97/103

NTB16-110n

CLAIMS INFORMATION
I.

IF Belt Inspection is not Performed and Sub-Assembly is replaced
Submit a Primary Part (PP) type line claim using the following claims coding:
MODEL

OPERATION

PFP OP CODE SYM DIAG FRT
JD01AA
All
CVT R&R
(2)
JD023A
Altima
3.7
(1)
ZE
32
Replace CVT Sub-assembly
JX50AA
(includes control valve R&I)
Rogue
3.8
All
Reprogram TCM (when applicable)
JE99AA
(2)
(1) Reference the Parts Information Table and use the applicable BELT-PULLEY KIT Part
Number 31214-***** as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
EXPENSE CODE
EXPENSE CODE
008

DESCRIPTION
5460 Sealant

MAX AMOUNT
$12.46

Claims Information continued on the next page.

98/103

NTB16-110n

CLAIMS INFORMATION - CONTINUED

OR
If Belt Inspection is Performed and Sub-Assembly is replaced (belt inspection shows
signs of belt slip, NG)
Submit a Primary Part (PP) type line claim using the following claims coding:
MODEL

OPERATION

All

CVT R&R

PFP OP CODE SYM DIAG
JD01AA
JD023A

FRT
(2)

Altima
Inspect CVT Chain, Chain = NG
JX36AA
1.1
(Includes control valve R&I)
Rogue
(1)
ZE
32
Altima
2.9
Replace CVT Sub-assembly
JX45AA
Rogue
3.0
All
Reprogram TCM (when applicable)
JE99AA
(2)
(1) Reference the Parts Information Table and use the applicable BELT-PULLEY KIT Part
Number 31214-***** as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
EXPENSE CODE
EXPENSE CODE
008

DESCRIPTION
5460 Sealant

MAX AMOUNT
$12.46

OR
If Only Control Valve is replaced:
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
PFP OP CODE SYM DIAG FRT
Inspect CVT Chain, Chain = OK
JX37AA
0.3
Replace Valve Body
(1)
JD48AA
ZE
32
(2)
Reprogram TCM (When Applicable)
JE99AA
(2)
(1) Reference the Parts Information Table and use the VALVE ASSY KIT-CONTROL part
number (3170E-*****) as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.

99/103

NTB16-110n

Check-off parts as they are used in the Service Procedure and attach to work order
A.

PARTS KITS REFERENCE TABLE (Parts are listed in order of installation)
CHECK
DESCRIPTION
PART #
OFF
PUMP ASSY-OIL 31340-28X0A
PUMP ASSY-OIL
SEAL-O RING
31526-28X0C
Kit 31340-28X8A includes:
RING-SNAP
31506-1XF12
SEAL-O RING
31526-28X0A
(O-ring between CVT case and side cover)
Altima
31209-28X9A
2014-2016 Rogue
PULLEY ASSY - CVT
and 2017 Rogue
31209-28X9B
(Belt and pulley “sub-assembly”)
AWD
2017 Rogue FWD 31214-28X9C
Loctite 5460 Sealant
999MP-LT5460P
31377-1XD00
BOLT
(or 31377-1XZ0B)
SEAL-O RING
31526-28X0C
Rogue only
(For pulley retainer bolts)
SEAL-OIL,DIFF
38342-3VX0A
(Differential side oil seal; CVT case side)
BRG ASSY-THRUST NEEDLE (Thrust bearing)
See page 101
SEAL ASSY-OIL
31375-1XF00
(Torque converter oil seal; converter housing)
SEAL-OIL,DIFF (Differential side oil seal;
38342-3VX0B
converter housing side, front wheel drive only)
SEAL-O RING (For input shaft)
31526-80X01
Loctite 5460 Sealant
999MP-LT5460P
BOLT
31377-1XD00
FLTR ASSY-OIL,AUTO TRANS (CVT fluid filter)
31726-28X0A
SEAL-O RING (For filter cover)
31526-3VX0A
SEAL-LIP (Between CVT and control valve)
31528-1XZ0A
BRACKET (Temperature sensor bracket)
31069-3VX0D
VALVE ASSY-CONT (Valve body)
3170E-28X0B
BAND (Zip tie for bracket)
24224-3VX0A
STRAINER ASSY-OIL, AUTO TRANS
31728-28X0A
GSKT-OIL PAN
31397-1XF0D
WASHER-DRAIN (For drain plug)
11026-JA00A
Seal O-Ring (Speed Sensor)
31526-1XG0C
Transmission Cooler Cleaner
999MP-AM006P
CLAMP (Hose Spring Clamp)
16439-7S01E
SEAL-O RING (CVT filler plug at converter housing) 31526-3VX0B
Nissan NS-3 CVT Fluid
999MP-CV0NS3
SEAL-O RING (Transfer case to CVT, AWD only)
33118-4BA0A

100/103

QUANTITY
1
1 (of 7)
1
1

1

As needed
19 (of 42)
6 (of 7)
1
1
1
1
1
As needed
23 (of 42)
1
1
1
1
1
1
1
1
1
1
As needed
2
1
As needed
1

NTB16-110n

THRUST BEARINGS
B.

DESCRIPTION

PART #: 31407-

BEARING THICKNESS

QTY

THRUST BEARING

1XZ0B
1XZ0C
1XZ0D
1XZ0E
1XZ1A
1XZ1B
1XZ1C
1XZ1D

3.57
3.75
3.93
4.1
4.28
4.46
4.61
4.79

1 of each is
included in the
Pulley Kit. Select
1 for installation.

101/103

NTB16-110n

J.

PART KITS VISUAL REFERENECE
 The following Figures show the smaller components of KIT-PULLEY.


KIT- CONTROL VALVE is not shown.

31375 - 1XF00

Figure 178 shows
the assorted seals,
O-rings, etc. in
“KIT-PULLEY”

Figure 178
PUMP ASSY-OIL parts

BRG ASSY-THRUST NEEDLE parts

Figure 179

Figure 180

102/103

NTB16-110n

REMINDER! Attach the following to the repair order:







Total EndPlay (A) calculation (page 59)
C-III plus screen showing the TCM part number before and after the reprogramming
(Step 147 on page 84)
Additional Service Procedure Check Off Sheet (Page 85)
C-III plus screen showing the current calibration data (Step 149 on page 85)
C-III plus screen showing the new calibration data (Step 149 on page 85)
Parts Kit Reference Table (Page 100)

AMENDMENT HISTORY
DATE
REFERENCE
DESCRIPTION
September 14, 2016 NTB16-110
Original bulletin published
Minor changes made on pages 1, 4, 16, 19, 29,
February 9, 2017
NTB16-110a
32, 35, 40, 46, 47, 53, 56, 65, 69 and 83
PARTS INFORMATION changed to combine all
April 27, 2017
NTB16-110b
control valve parts into a single kit
June 7, 2017
NTB16-110c
Updated figures on page 53
Changed IF YOU CONFIRM section, Repair Flow
August 29, 2017
NTB16-110d
Chart information, and Figures 10G, 3I and 4I
October 16, 2017
NTB16-110e Multiple changes throughout
Changes to Repair Flow Chart and PARTS
November 2, 2017 NTB16-110f
INFORMATION section, and included additional
service information
2013-2014 Altima added to the APPLIED
VEHICLES and Table A on page 80; superseded
December 19, 2018 NTB16-110g
NTB15-084 and NTB15-086. SERVICE
PROCEDURE updated on page 81
March 13, 2018
NTB16-110h Information added under NOTE on page 1
Changes made to IF YOU CONFIRM and
July 6, 2018
NTB16-110i
CLAIMS INFORMATION sections, and added part
numbers to Table B
Changes made to IF YOU CONFIRM section and
October 26, 2018
NTB16-110j
Repair Flow Chart
DTC P2813 added to the title, IF YOU CONFIRM
December 13, 2018 NTB16-110k
section, and Repair Flow Chart
Table B, APPLIED VEHICLES, PARTS
February 4, 2019
NTB16-110L INFORMATION, and PARTS KITS REFERENCE
TABLE sections revised
Step 125 added. Table B, and pages 71 and
October 1, 2019
NTB16-110m
77 revised.
Step 10 on page 18 revised, single use parts lists
added to PARTS INFORMATION, and a part
March 4, 2020
NTB16-110n number was revised in PARTS INFORMATION,
PARTS KITS REFERENCE TABLE, and CLAIMS
INFORMATION

103/103

NTB16-110n