NHTSA ID Number: 10173599
Manufacturer Communication Number: NTB16-110n
TSB/Document Date: 2020-04-08
Summary
2013-2017 ALTIMA AND 2014-2017 ROGUE; 4 CYLINDER WITH DTC P17F0, P17F1, P0776, P2813, P1715, AND/OR P0841 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
177. Repeat step 176 ten times.
178. Move the shift selector to the P position, and then turn the ignition OFF.
89/103
NTB16-110n
TROUBLESHOOTING
The Dummy Cover Will Not Sit Flush
If the dummy cover does not sit flush, the
clutch pack may not be fully seated.
Clutch pack
seated correctly
Figure 173 shows the clutch pack
fully seated.
The clutch pack is not fully seated if it
is not below the surface that the
dummy cover bolts to.
Use the instructions below to fully
seat clutch pack.
Surface dummy
cover seats on
NOTE: Always handle the clutch pack by
the input shaft.
Figure 173
Dummy cover
179. Remove the dummy cover.
Figure 174
Clutch pack
180. Pull up the clutch pack by the input
shaft to remove the entire clutch pack.
Make sure the O-ring is not
installed at this time, or it could be
damaged during reassembly.
Input shaft
Figure 175
90/103
NTB16-110n
Clutch pack
Clutch pack layers
181. Using an appropriate tool, Gently align
the layers of the clutch pack.
Bottom of the clutch pack shown in
Figure 176.
Appropriate
tool
Align layers
Figure 176
182. Re-insert the entire clutch pack while
holding the input shaft.
183. Gently jiggle the input shaft until the
clutch pack seats below case lip.
Input shaft
184. If the clutch pack does not seat, rotate
back and forth from the input shaft and
jiggle.
185. If the clutch pack still does not seat,
repeat from step 180.
Clutch pack
Figure 177
91/103
NTB16-110n
PARTS INFORMATION
SUB-ASSEMBLY REPAIR
NOTE: Refer to the following pages for single use parts that are not included in the
kits below.
DESCRIPTION
PART #
See Table C,
below
QUANTITY
VALVE ASSY KIT - CONTROL (Valve body)
Valve Assy Kit - Control includes:
VALVE ASSEMBLY - CONTROL (1)
STRAINER ASSY - OIL, AUTO TRANS
BRACKET (Temperature sensor bracket)
BAND (Zip tie for bracket)
GSKT-OIL PAN
SEAL - LIP (Between CVT and control valve)
Seal, O-Ring (Fluid filler plug gasket)
3170E-28X0B
1
Loctite 5460 Sealant (2) (3)
999MP-LT5460P
(4)
999MP-CV0NS3
As needed
Transmission Cooler Cleaner (2)
999MP-AM006P
As needed
BELT - PULLEY KIT
1
1
1
1
1
1
1
1
(1) Includes QR label, CD-R, and control valve assembly.
(2) This item can be ordered through the Nissan
Maintenance Advantage program: Phone:
877-NIS-NMA1 (877-647-6621) or Website: Order via link on dealer portal
www.NNAnet.com and click on the “Maintenance Advantage” link.
(3) Bill out Loctite 5460 Sealant under expense code 008. Do not include the Loctite 5460
Sealant part number on the claim.
(4) One container of Loctite 5460 Sealant is good for approximately 5 repairs. This sealant
is not included in any kit.
(5) For warranty repairs, Nissan NS-3 CVT Fluid must be used. For customer pay repairs,
Nissan NS-3 CVT Fluid or an equivalent is recommended.
Table C
DESCRIPTION
BELT-PULLEY KIT
MODEL
Altima
PART NUMBER
31214-28X9E
2014-2016 Rogue
31214-28X9B
2017 Rogue AWD
31214-28X9B
2017 Rogue FWD
31214-28X9C
92/103
NTB16-110n
SUB-ASSEMBLY REPAIR - CONTINUED
****Single use parts that are not included in the kits on page 92****
2013-2017 Altima
DESCRIPTION
PART # PREFIX QUANTITY
PIN - COTTER, SPLI (Outer socket cotter pin)
08921
2
NUT (Stabilizer connecting rod nut to strut)
01225
2
PIN - COTTER (Axle cotter pin)
40073
2
NUT - LOCK, FRONT WHEEL BEARING
(Wheel hub lock nut)
40262
2
NUT (Lower strut nuts)
54588
4
GASKET - EXHAUST
(Ring gasket [front to manifold])
20691
1
NUT (Front to manifold)
01223
3
GASKET - EXHAUST (Front to rear exhaust)
20692
1
NUT (Steering gear mounting nuts)
54588
2
CLAMP (CVT Water hose clamps)
16439
2
CLAMP (CVT fluid cooler hose clamps)
21639
2
SEAL - O RING (Fill-tube O-ring)
31084
1
GASKET (CVT drain plug gasket)
11026
1
SEAL - O RING (O-ring: CVT fluid overflow plug)
31526
1
2015-2017 Altima ONLY:
COCK - WATER DRAIN
(Radiator drain plug O-ring [full petcock only available])
21440
1
93/103
NTB16-110n
SUB-ASSEMBLY REPAIR - CONTINUED
****Single use parts that are not included in the kits on page 92****
2014-2017 Rogue - FWD
DESCRIPTION
PART # PREFIX QUANTITY
PIN - COTTER (Axle cotter pin)
40073
2
NUT - LOCK, FRONT WHEEL BEARING
(Wheel hub lock nut)
40262
2
NUT - KNUCKLE SPINDLE
(Lower knuckle nut to control arm)
40262
2
01225
2
54588
2
PACKING - DRAIN COCK (Radiator drain plug O-ring)
21481
1
GASKET - EXHAUST
(Ring gasket, front to manifold)
20691
1
NUT (Front to manifold)
01223
3
GASKET - EXHAUST (Front to center exhaust)
20692
1
CLAMP (CVT fluid cooler hose clamps)
21639
2
CLAMP (CVT water hose clamps)
16439
2
CLIP (Water hose clip)
24225
1
SEAL - O RING (Fill-tube O-ring)
31084
1
WASHER - DRAIN PLUG (CVT drain plug gasket)
11026
1
SEAL - O RING (O-ring: CVT fluid overflow plug)
31526
1
01223
2
NUT (Stabilizer connecting rod nut to strut)
Applicable to the following vehicles:
VIN begins with “KNM”
VIN begins with “5N1”
AND
Was built between 10/2013 - 12/2013,
OR after 10/2014
NUT (Stabilizer connecting rod nut to strut)
Applicable to the following vehicles:
VIN begins with “JN8”
VIN begins with “5N1”
AND
Was built between 12/2013 - 10/2014
2016-2017 Rogue FWD ONLY:
NUT (Outer socket nuts)
94/103
NTB16-110n
SUB-ASSEMBLY REPAIR - CONTINUED
****Single use parts that are not included in the kits on page 92****
2014-2017 Rogue - AWD
DESCRIPTION
PART # PREFIX QUANTITY
PIN - COTTER (Axle cotter pin)
40073
2
NUT - LOCK, FRONT WHEEL BEARING
(Wheel hub lock nut)
40262
2
NUT - KNUCKLE SPINDLE
(Lower knuckle nut to control arm)
40262
2
01225
2
54588
2
PACKING - DRAIN COCK
(Radiator drain plug O-ring)
21481
1
GASKET - EXHAUST
(Ring gasket, front to manifold)
20691
1
NUT (Front to manifold)
01223
3
GASKET - EXHAUST (Front to center exhaust)
20692
1
BOLT - FIX, PROPELLER SHAFT
(Propeller shaft bolts to transfer assy)
37120
4
SEAL - O RING (Transfer case to CVT O-ring)
33118
1
CLAMP (CVT fluid cooler hose clamps)
21639
2
CLAMP (CVT water hose clamps)
16439
2
CLIP (Water hose clip)
24225
1
NUT (Stabilizer connecting rod nut to strut)
Applicable to the following vehicles:
VIN begins with “KNM”
VIN begins with “5N1”
AND
Was built between 10/2013 - 12/2013,
OR after 10/2014
NUT (Stabilizer connecting rod nut to strut)
Applicable to the following vehicles:
VIN begins with “JN8”
VIN begins with “5N1”
AND
Was built between 12/2013 - 10/2014
Continued on the next page
95/103
NTB16-110n
SUB-ASSEMBLY REPAIR - CONTINUED
****Single use parts that are not included in the kits on page 92****
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB16-110n
Replacement Service Bulletin Number:
MFR Communication Date: 2020-03-04
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.