NHTSA ID Number: 10173472
Manufacturer Communication Number: U17_NOx_Conv1
TSB/Document Date: 2020-04-06
Summary
Reductant Quality
REMOTE DIAGNOSTICS - REPAIR INSTRUCTIONS
S
DTC:
Bulletin:
Date:
P207F-00
Description:
RD18-036
May 10, 2018
Reductant Quality - No additional information
US17 - US20 Emissions
Applies to:
For Spanish click here: ESPAÑOL
General Information
These repair instructions are intended to address the following fault(s):
DTC
Description
•
•
•
P207F-00
Reductant Quality
- No additional
information
Possible (Observable)
Symptoms
Possible Cause
•
•
•
Dosing too low
Wrong liquid in tank
Aftertreatment selective catalytic
reduction (SCR) catalyst
Aftertreatment diesel exhaust fluid (DEF)
dosage valve
Restricted filter
Aftertreatment Hydrocarbon Doser, overfueling
Vehicle speed is limited to
5 mph
Required Parts
Part Number
Description
Quantity
22303384
Post-Cat NOx sensor
1
22303390
Pre-Cat NOx sensor
1
Repair Instructions
NOTE: Vehicles equipped with US2010 and later emission compliant engines have two NOx sensors, one that
measures NOx level before the exhaust enters the Selective Catalyst Reduction (SCR) unit and one that measures
NOx level after the exhaust leaves the SCR. This procedure is for both NOx sensor and control module locations.
NOx Sensor, Replacement (KS1)
1.
2.
3.
4.
5.
Park the vehicle on a level surface with the steering wheel in the straight ahead position.
Apply the parking brake.
Place the transmission in neutral or park.
Install the wheel chocks.
Disconnect the cable from the battery's negative terminal.
Page 1 of 6
© 2016 Volvo
Group North America, LLC. Information is subject to change without notice.
REMOTE DIAGNOSTICS - REPAIR INSTRUCTIONS
S
DTC:
P207F-00
Bulletin:
Date:
6. Remove the cable ties. Note: Mark the position and number.
7. Remove the screws.
8. Remove the plate.
9. Disconnect the connector.
10. Remove the screws.
11. Remove the control unit.
Page 2 of 6
© 2016 Volvo Group North America, LLC. Information is subject to change without notice.
RD18-036
May 10, 2018
REMOTE DIAGNOSTICS - REPAIR INSTRUCTIONS
S
DTC:
P207F-00
Bulletin:
Date:
RD18-036
May 10, 2018
12. Disconnect the connector.
13. Repack the defective component(s) before returning for warranty evaluation. Note: Take care when handling
fragile components, such as sensors.
14. Connect the connector.
15. Torque tighten the sensor. Sensor, flange nut: 50 ±10 Nm (37 ±7 lbf⋅ft)
16. Connect the connector.
17. Install the control unit.
18. Install the screws.
Page 3 of 6
© 2016 Volvo Group North America, LLC. Information is subject to change without notice.
REMOTE DIAGNOSTICS - REPAIR INSTRUCTIONS
S
DTC:
P207F-00
Bulletin:
Date:
RD18-036
May 10, 2018
19. Torque tighten the screws. Module, NOx sensor: 10 ±2 Nm (7 ±1 lbf⋅ft)
20. Install the plate.
21. Install the screws.
22. Install the cable ties. The bend radius of the cable must not be less than the specified value. Cable, radius: ≥20
mm (≥0.79 in)
23. Connect the battery cable to negative (ground) terminal. Delete DTC (Diagnostic Trouble Code) according to the
diagnostic tool (Premium Tech Tool) instructions.
24. Remove the wheel chocks.
Page 4 of 6
© 2016 Volvo Group North America, LLC. Information is subject to change without notice.
REMOTE DIAGNOSTICS - REPAIR INSTRUCTIONS
S
DTC:
P207F-00
Bulletin:
Date:
NOx Sensor, Replacement (KS2)
1. Connect the connector.
2. Torque tighten the sensor. Sensor, flange nut: 50 ±10 Nm (37 ±7 lbf⋅ft)
3.
4.
5.
6.
Connect the connector.
Install the control unit.
Install the screws.
Torque tighten the screws. Module, NOx sensor: 10 ±2 Nm (7 ±1 lbf⋅ft)
Page 5 of 6
© 2016 Volvo Group North America, LLC. Information is subject to change without notice.
RD18-036
May 10, 2018
REMOTE DIAGNOSTICS - REPAIR INSTRUCTIONS
S
DTC:
Bulletin:
Date:
P207F-00
RD18-036
May 10, 2018
7. Install the cable ties. Conditions: The bend radius of the cable must not be less than the specified value. Cable,
radius: ≥20 mm (≥0.79 in)
8. Position the fairing.
9. Connect the lanyard.
10. Latch the fairing.
11. Connect the battery cable to negative (ground) terminal.
12. Delete DTC according to the diagnostic tool (Premium Tech Tool) instructions.
13. Remove the wheel chocks.
Additional Resources
These repairs are the most likely fix for the identified fault(s), if this does not fix the issue, Tech Tool will need to be
used for more detailed diagnostics. If filing a warranty claim, please include the ASIST case number.
Labor Code
2589-03-02-65 KS1
0.5
2589-03-02-66 KS2
0.3
Causal Part
22303390
22303384
Page 6 of 6
© 2016 Volvo Group North America, LLC. Information is subject to change without notice.
INSTRUCCIONES DE REPARACIÓN DE DIAGNÓSTICO REMOTO
DTC:
Descripción:
Se aplica a:
P207F-00
Boletín: RD19-026
Fecha: 16 de septiembre de 2019
Calidad del reductor - No hay información adicional
Emisiones de US17 – US20
Para inglés, haga clic aquí: ENGLISH
Información general
Estas instrucciones de reparación están destinadas a abordar las siguientes fallas:
DTC
P207F-00
Descripción
Calidad del reductor No hay información
adicional
Posibles síntomas
(observados)
Causa posible
•
•
•
•
•
•
Dosificación demasiado baja
Líquido incorrecto en el tanque
Catalizador de reducción catalítica
selectiva de postratamiento (SCR)
Válvula de dosificación de fluido de
escape diésel de postratamiento (DEF)
Filtro restringido
Dosificador de hidrocarburos de
postratamiento, suministro excesivo
La velocidad del vehículo
está limitada a 5 mph
Piezas necesarias
Número de pieza
Descripción
Cantidad
22303384
Sensor NOx posterior al catalizador
1
22303390
Sensor NOx previo al catalizador
1
Instrucciones de reparación
NOTA: Los vehículos equipados con motores que cumplen las emisiones US2010 y posteriores tienen dos sensores
de NOx, uno que mide el nivel de NOx antes de que el escape ingrese a la unidad de Reducción catalítica selectiva
(SCR) y otro que mide el nivel de NOx después de que el escape sale de SCR. Este procedimiento es para ambas
ubicaciones del módulo de control y sensor de NOx.
Sensor NOx, Reemplazo (KS1)
1.
2.
3.
4.
5.
Estacione el vehículo en una superficie plana con el volante en posición recta.
Aplique el freno de estacionamiento.
Ponga la transmisión en neutro o estacionamiento.
Instale los bloqueos de las ruedas.
Desconecte el cable desde el terminal negativo de la batería.
© 2016 Volvo Group North America, LLC. Información sujeta a cambios sin previo aviso.
INSTRUCCIONES DE REPARACIÓN DE DIAGNÓSTICO REMOTO
DTC:
P207F-00
Boletín: RD19-026
Fecha: 16 de septiembre de 2019
6. Retire las correas. Nota: Marque la posición y el número.
7. Retire los tornillos.
8. Retire la placa.
9. Desconecte el conector.
10. Retire los tornillos.
11. Retire la unidad de control.
© 2016 Volvo Group North America, LLC. Información sujeta a cambios sin previo aviso.
INSTRUCCIONES DE REPARACIÓN DE DIAGNÓSTICO REMOTO
DTC:
P207F-00
Boletín: RD19-026
Fecha: 16 de septiembre de 2019
12. Desconecte el conector.
13. Vuelva a empacar los componentes con fallas antes de devolverlos para evaluación de la garantía.
Nota: Tenga cuidado cuando manipula componentes frágiles, como sensores.
14. Conecte el conector.
15. Apriete el sensor. Sensor, tuerca de brida: 50 ±10 Nm (37 ±7 libras⋅pie)
16. Conecte el conector.
17. Instale la unidad de control.
18. Instale los tornillos.
© 2016 Volvo Group North America, LLC. Información sujeta a cambios sin previo aviso.
INSTRUCCIONES DE REPARACIÓN DE DIAGNÓSTICO REMOTO
DTC:
P207F-00
Boletín: RD19-026
Fecha: 16 de septiembre de 2019
19. Apriete los tornillos. Módulo, sensor NOx: 10 ±2 Nm (7 ±1 libras⋅pie)
20. Instale la placa.
21. Instale los tornillos.
22. Instale las correas. El radio de curvatura del cable no debe ser inferior al valor especificado. Cable,
radio: ≥20 mm (≥0.79 pulgadas)
23. Conecte el cable de batería al terminal negativo (tierra). Elimine DTC (Códigos de diagnóstico de problemas)
de acuerdo con las instrucciones de la herramienta de diagnóstico (Premium Tech Tool).
24. Retire los bloqueos de las ruedas.
© 2016 Volvo Group North America, LLC. Información sujeta a cambios sin previo aviso.
INSTRUCCIONES DE REPARACIÓN DE DIAGNÓSTICO REMOTO
DTC:
P207F-00
Boletín: RD19-026
Fecha: 16 de septiembre de 2019
Sensor NOx, Reemplazo (KS2)
1. Conecte el conector.
2. Apriete el sensor. Sensor, tuerca de brida: 50 ±10 Nm (37 ±7 libras⋅pie)
3.
4.
5.
6.
Conecte el conector.
Instale la unidad de control.
Instale los tornillos.
Apriete los tornillos. Módulo, sensor NOx: 10 ±2 Nm (7 ±1 libras⋅pie)
© 2016 Volvo Group North America, LLC. Información sujeta a cambios sin previo aviso.
INSTRUCCIONES DE REPARACIÓN DE DIAGNÓSTICO REMOTO
DTC:
P207F-00
Boletín: RD19-026
Fecha: 16 de septiembre de 2019
7. Instale las correas. Condiciones: El radio de curvatura del cable no debe ser inferior al valor especificado.
Cable, radio: ≥20 mm (≥0.79 pulgadas)
8. Coloque el compensador.
9. Conecte la amarra.
10. Asegure el compensador.
11. Conecte el cable de batería al terminal negativo (tierra).
12. Elimine DTC de acuerdo con las instrucciones de la herramienta de diagnóstico (Premium Tech Tool).
13. Retire los bloqueos de las ruedas.
Recursos adicionales
Es muy probable que estas reparaciones solucionen la falla identificada encierre; si esto no soluciona el problema,
se requerirá el uso de Tech Tool para diagnósticos más detallados. Si presenta una reclamación de garantía,
incluya el número de caso ASIST.
Código de trabajo
2589-03-02-65 KS1
0.5
2589-03-02-66 KS2
0.3
Pieza causal
22303390
22303384
© 2016 Volvo Group North America, LLC. Información sujeta a cambios sin previo aviso.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: U17_NOx_Conv1
Replacement Service Bulletin Number:
MFR Communication Date: 2020-03-09
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.