32-016 Service Bulletin/Repair Instructions

32-016 Jump Starting
Page 1 of 2
Service Bulletin

32-016
Section

32 - Cranking
Description

Correct voltage for Vehicle Jump Start.
Release Date

3/17/2020
Introduction

Proper jump starting voltage will eliminate high voltage related issues and equipment damage.
Resolution

Information Only
Ensure appropriate care and voltage are utilized when jump starting a vehicle.
Procedure
WARNING

When using a battery charger or booster to jump start a vehicle, verify that the charger or

booster is set to the same voltage as the vehicle electrical system and batteries. For example, if

the vehicle uses a 12-volt electrical system, the charger or booster voltage must be set no higher

than 12 volts. Using inappropriate voltage to jump start a vehicle may cause explosion or fire.

Failure to comply with this warning may result in equipment or property damage, personal injury,

or death.

Before jump starting a vehicle, review all steps, notes, cautions and warnings regarding jump starts listed in the

Emergency Section of the vehicle Operator’s Manual.

Ensure that the battery disconnect switch is in the connected position and all battery cables are securely and properly

connected to the batteries before attempting to jump start a vehicle.

Authored by: NG
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldservice/Pages/... 4/1/2020
32-016 Jump Starting
Page 2 of 2
Access to PACCAR’s Enterprise Portal is provided as a benefit of doing business with PACCAR. All applications and content accessed

through this system are confidential and proprietary and the property of PACCAR Inc and its suppliers, and must be kept strictly

confidential pursuant to the contract licensing such access. Disclosure, publication, release or distribution of any material found on

PACCAR systems to any person other than employees with a need to know such information is strictly prohibited. All activity on this

system is monitored. If PACCAR suspects or discovers any unauthorized activity, access may be immediately terminated without

prior notification. Violators may be subject to legal action.

© Copyright 2020 PACCAR Inc. All rights reserved. We welcome your feedback on this page. For technical questions or concerns

about this page, please contact the DealerNet Webmaster.
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldservice/Pages/... 4/1/2020
TIB 32-016: Failure to use the correct voltage may damage equipment.
Page 1 of 2
Technical Information Bulletin

32-016
Section

Starter, Battery - 32
Subject

Vehicle Jump Start Voltage
Release Date

3/17/2020
Condition

Proper jump start voltage will prevent equipment damage.
Chassis Affected

All vehicles
Action

Information Only

Ensure your technicians are using appropriate care and voltage when jump starting a vehicle.
Procedure

WARNING!

When using a battery charger or booster to jump start a vehicle, verify that the charger or booster is set to
https://eportal.paccar.com/dealer/uskw/en/service/vehiclebulletins/vehiclefieldservice/Page... 3/31/2020
TIB 32-016: Failure to use the correct voltage may damage equipment.
Page 2 of 2
the same voltage as the vehicle electrical system and batteries. For example, if the vehicle uses a 12-volt

electrical system, the charger or booster voltage must be set no higher than 12 volts. Using inappropriate

voltage to jump start a vehicle may cause explosion or fire. Failure to comply with this warning may result in

equipment or property damage, personal injury, or death.

Before jump starting a vehicle, review all steps, notes, cautions and warnings regarding jump starts listed in the Emergency section of the vehicle

Operator's Manual.

Ensure that the battery disconnect switch is in the connected position and all battery cables are securely and properly connected to the batteries

before attempting to jump start a vehicle.
Authored by: OF
Access to PACCAR’s Enterprise Portal is provided as a benefit of doing business with PACCAR. All applications and content accessed through this

system are confidential and proprietary and the property of PACCAR Inc and its suppliers, and must be kept strictly confidential pursuant to the

contract licensing such access. Disclosure, publication, release or distribution of any material found on PACCAR systems to any person other

than employees with a need to know such information is strictly prohibited. All activity on this system is monitored. If PACCAR suspects or

discovers any unauthorized activity, access may be immediately terminated without prior notification. Violators may be subject to legal action.
© Copyright 2020 PACCAR Inc. All rights reserved. We welcome your feedback on this page. For technical questions or concerns about this

page, please contact the DealerNet Webmaster.
https://eportal.paccar.com/dealer/uskw/en/service/vehiclebulletins/vehiclefieldservice/Page... 3/31/2020

SaleBestseller No. 1

ANCEL X7HD 10'' Heavy Duty Truck Scanner, Semi Trucks Full System Diagnostic Tool, Bidirectional Diesel Scan Tool with DPF, ECU Coding, 40+ Reset for Cummins, Detroit, Caterpillar, Volvo, Paccar etc

🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc

SaleBestseller No. 2

ANCEL Heavy Duty Truck Scanner HD601 All System Diesel Diagnostic Scan Tool fits for Cummins, Detroit, Freightliner, International, Paccar, Check Engine for Truck & Car 2 in 1 Code Reader

【Extensive Compatibility】HD601 heavy duty truck scanner supports 12V & 24V commercial vehicles and all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Caterpillar, Freightliner, International, Peterbilt, Ford Heavy Truck, Class 4-Class 8 trucks, etc. It also supports engine diagnosis on most cars, minivans, light trucks and pickups
【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Caterpillar, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money. Note: Only heavy truck vehicles that comply with the above protocol can diagnose the entire system
【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand code definitions and helps you locate vehicle faults. Note: This device cannot directly solve the fault. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work

SaleBestseller No. 3

NEXAS Heavy Duty Truck Scanner NL102 Full System Diesel Truck Scan Tool for Cummins, Isuzu, Freightliner, Caterpillar, Detroit, Peterbilt, 2-in-1 Code Reader Read & Clear Fault Codes for Truck & Car

Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
Wide Compatibility - Friendly Reminder: To avoid compatibility issues, please confirm with us via Amazon Messages before purchasing. This heavy duty truck scanner is compatible with all heavy-duty trucks and semi that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, ISUZU etc. Equipped with 6-pin, 9-pin, and 16-pin connectors for versatile device compatibility, ensuring stable plug-and-play connections.
Save Hundreds of Money for All Heavy Duty Trucks – This diesel diagnostic scanner supports accurate full-system scans for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). It can read and clear trouble codes across a range of vehicle systems, including the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The truck scanner communicates directly with your truck's computer to provide real-time data stream analysis, letting you pinpoint issues with precision. This cuts down on waste from unnecessary part replacements, saving you time and hundreds or even thousands of dollars.
All OBD2 Functions + Battery Health Monitoring – Unlike many obd2 scanners on the market that only cover partial OBD2 features, ours gives you full OBD2 capability: read & clear codes, live data, freeze frame data, I/M readiness checks, EVAP tests, on-board monitor, O2 sensor tests, vehicle info, and DTC lookup. That means more detailed insights for pros and DIYers alike. The NL102 isn't just a code scanner – it's a battery saver. Regularly check your car's battery health, and catch issues before it dies completely. No more unexpected no-starts in the driveway or on the road. It diagnoses battery condition accurately, helping you avoid costly last-minute repairs.
Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor