NHTSA ID Number: 10173128
Manufacturer Communication Number: 15-249-19R
TSB/Document Date: 2020-04-02
Summary
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.
ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2019 Subaru
of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE BULLETIN
APPLICABILITY:
2020 Subaru
Vehicles
SUBJECT: 2020 Audio/Navigation & Power Amplifier
Exchange Component Identification and
Procedures
NUMBER: 15-249-19R
DATE: 09/18/19
REVISED: 03/19/20
INTRODUCTION
This bulletin contains illustrations of exchange components and their manufacturer as well as a
description of the proper exchange procedure. The exchange program policy can also be found in
Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in Subarunet.
CONTENTS
Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty, the
Exchange Program provides for replacement of a defective unit from the manufacturer.
In the event the vehicle is “New” and “In-stock”, inform the Service Center. A new unit will be
supplied rather than a remanufactured unit. If the Service Center is unable to provide a new unit,
immediately contact a Subaru
Retailer Claims Specialist at 1-866-782-2782 prior to placing an order
for further instructions.
The replacement of a new unit, other than new units supplied through the exchange program, requires
authorization from a Subaru
of America, Inc. Retailer Claims Specialist at 1-866-782-2782. An
authorization code will be provided and must be included upon claim submission.
Vehicles that have been placed in demo service should use exchange units only.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru
Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru
of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international
standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 1 of 18
EXCHANGE PROCEDURE FOR ALL EXCHANGE COMPONENTS
1) The defective chassis should remain in the vehicle until the exchange unit is installed.
2) Contact the applicable Service Center with the following information:
•
•
•
•
•
•
•
•
•
•
•
Retailer Code
Retailer Name and Address
VIN - All 17 Characters
Date of Vehicle Sale
Vehicle Mileage
Caller’s Name and Telephone Number
Claim Number
Face Plate ID Number (Clarion only)
Subaru
Part Number as shown in this bulletin
Customer Complaint
Customer Last Name
At this time, the Service Center will issue an exchange number. It is required that this number be
provided upon claim submission.
An exchange chassis along with an exchange form will be shipped within 72 hours. If the exchange
chassis is not received within 5 days, call the Service Center. Provide the operator with the exchange
number when making inquiries.
3) Install the exchange unit as soon as possible upon receipt. Return the defective chassis to the
manufacturer within 30 days. Return freight charges may be claimed as sublet, provided the
repair was performed under the terms of the Basic New Car Warranty. Copies of the freight
invoice should be attached to the repair order.
If the exchange unit has not been installed or the failed chassis has not been returned within 30 days,
contact the Service Center. Reference the exchange number and explain the circumstances causing
the delay. An extension will be granted or the retailer will be instructed to return the exchange unit.
Failure to comply will result in a “charge back” to the retailer for the cost of the exchange unit.
The retailer must return the failed component in the same approved packaging that the exchange unit
arrived in. Harman exchange units arrive with a pre-paid return shipping label. A hard copy of the
printout from the on-line order or the Exchange Request Form must be included in the core return
package. Failure to use proper packaging could result in a “charge back” for the cost of the exchange
unit and shipping.
NOTE: Activation of all subscription based services is the responsibility of the vehicle owner.
NOTE: Do not disassemble any unit to retrieve a lodged CD prior to returning to the manufacturer.
See Section 8.4.9.4 of the Claims Policies & Procedures on-line manual for the policy on returning
the CD(s) to the customers.
NOTE: For the “Audio Out of Warranty Exchange / Repair Program” refer to the Added Security
Section 11.2.10 or Policy Adjustment Section 12.6.1 of the Claims Policies & Procedures on-line
manual.
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 2 of 18
MANUFACTURERS BY COMPONENT
Audio/Satellite
Clarion (Faurecia Clarion Electronics): Exchange order requests are to be made via the Web
Portal. Clarion exchange requests are processed by United Radio. The United Radio Service
Center is open from 8am – 8pm Eastern Time at 1-800-448-0944.
Exchange units are ordered online using the link found in Subarunet/ Service Operations
& Technical/ Forms/Downloads / Harman Kardon and Clarion Registration Instructions
(urdealerservices.com) Ordering Instructions.
DENSO/Denso Ten Service Center is open from 7am-5pm Pacific Time at 1-800-237-5413. The
Exchange Fax Form is found on Subarunet/ Service Operations & Technical/ Forms/Downloads/
Denso Ten Online Exchange Instructions. Click on the website address https://www.f10ncs.com
Harman: Exchange order requests are to be made via the Web Portal
Harman exchange requests are processed by United Radio. The United Radio Service Center is
open from 8am – 8pm Eastern Time at 1-800-448-0944.
Exchange units are ordered online using the link found in Subarunet/ Service Operations &
Technical/ Forms/Downloads / Harman Kardon Registration Instructions (urdealerservices.com)
Ordering Instructions
Caution: If swapping an audio system for diagnostic purposes, be sure the DCM remains with the
original vehicle or network communications will be severed.
Caution: SXM ESN is assigned by VIN. Moving audio units between vehicles will disrupt SXM
services.
Audio/Navigation/Satellite
DENSO/Denso Ten Service Center is open from 7am-5pm Pacific Time at 1-800-237-5413. The
Exchange Fax Form is found on Subarunet/ Service Operations & Technical/ Forms/Downloads/
Denso Ten Online Exchange Instructions. Click on the website address https://www.f10ncs.com
Harman: Exchange order requests are to be made via the Web Portal
Harman exchange requests are processed by United Radio. The United Radio Service Center is
open from 8am – 8pm Eastern Time at 1-800-448-0944.
Exchange units are ordered online using the link found in Subarunet/ Service Operations &
Technical/ Forms/Downloads / Harman Kardon Registration Instructions (urdealerservices.com)
Ordering Instructions
Caution: If swapping an audio system for diagnostic purposes, be sure the DCM remains with the
original vehicle or network communications will be severed.
Caution: SXM ESN is assigned by VIN. Moving audio units between vehicles will disrupt SXM
services.
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 3 of 18
Power Amplifier
Harman Kardon: Exchange order requests are to be made via the Web Portal
Harman Kardon exchange requests are processed by United Radio. The United Radio Service
Center is open from 8am – 8pm Eastern Time at 1-800-448-0944.
Exchange units are ordered online using the link found in Subarunet/ Service Operations &
Technical/ Forms/Downloads / Harman Kardon Registration Instructions (urdealerservices.com)
Ordering Instructions
RETURN OF LODGED CD
In the event a CD becomes lodged in the CD Player, do not disassemble the unit to retrieve the CD.
Please use the following procedure:
1) Follow the normal exchange procedures for requesting a replacement unit.
2) For the lodged/CD, record a daytime telephone number where the customer can be reached
and retain in customer’s file.
3) Remove the defective unit from the vehicle and return it to the manufacturer. The CD that
has been successfully removed by the manufacturer will be returned directly to the retailer
within 10 calendar days. It is the retailer’s responsibility to notify the customer when the CD
is returned.
NOTE: In the event a CD has been damaged, the manufacturer will reimburse the customer through
the dealer at $15.00 per damaged CD The retailer must in turn reimburse the customer. Only
commercially produced CD(s) can be included in the reimbursement program.
SATELLITE ACTIVATION INSTRUCTIONS
CLARION & DENSO
If you need to perform a warranty exchange on any radio that is factory equipped with a Clarion
or DENSO satellite radio, please follow the instructions below. Going through the process will
ensure that any fee for the new radio is waived and will ensure your customer continues to receive
their satellite radio programming without any interruption of service.
Step 1. Call Sirius XM Retailer Support at 1-800-852-9696 and let the agent know you are
doing a warranty exchange on a Subaru
vehicle.
Step 2. Provide the agent with the old Radio ID and ask them to transfer the service on this radio
to the new Radio ID. Confirm with the agent that the old Radio ID has been deactivated.
(To find the Radio ID, go into satellite radio mode and tune to channel “0”, the Radio
ID will display for you, it will be 8 alpha-numeric characters long).
Step 3. Confirm which services you are transferring e.g. Audio only or Audio and Traffic.
Step 4. Ask the SXM Dealer support agent to send an activation signal to the new radio and
confirm the radio is working. Retailers can also perform a signal refresh if necessary by
entering in the Radio ID into the following URL, www.siriusxm.com/oemrefresh
NOTE: If the unit is inoperative, call Sirius XM for assistance in identifying the existing radio ID
number.
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 4 of 18
HARMAN ONLY
All exchange units equipped with a Harman satellite radio will be reactivated by United Radio
prior to being shipped to the Retailer.
Caution: If swapping an audio system for diagnostic purposes, be sure the DCM remains with the
original vehicle or network communications will be severed.
Caution: SXM ESN is assigned by VIN. Moving audio units between vehicles will disrupt SXM
services.
EXCHANGE NUMBER EXAMPLES AND SERVICE CENTER PHONE NUMBERS FOR
AUDIO/NAVIGATION
The Audio Exchange Program provides for replacement of a defective Audio/Navigation unit with an
exchange unit from the manufacturer.
The applicable Service Center for each manufacturer should be contacted and at that time the Service
Center will issue an exchange number. It is required that this number be provided upon claim
submission.
Below are examples of the audio exchange numbers and the telephone number for the Service Center
for each manufacturer.
AUDIO EXCHANGE NUMBER EXAMPLES
Clarion Exchange Number Example – Orders placed prior to 12/23/19 .... (ERS#) 0000000001
Clarion Exchange Number Example – Orders placed as of 12/23/19 ....
digits – all numbers)
MCO # 1234567890 (Ten
Harman (United Radio) Exchange Number Example..Orders placed prior to 7/9/19
R.A. Number 9MW741 (1 digit 2 letters 3 digits)
Harman (United Radio) Exchange Number Example…Orders placed after 7/9/19
MCO # 1234567890 (Ten Digits – All Numbers)
AUDIO SERVICE CENTER PHONE NUMBERS AND HOURS OF OPERATION.
Clarion
1-800-448-0944
DENSO
1-800-237-5413
7am-5pm Pacific Time
Harman (United Radio)
1-800-448-0944
8am-8pm Eastern Time
8am-8pm Eastern Time
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 5 of 18
PACKING SLIP RO NUMBER REQUIREMENT – 2020 LEGACY & OUTBACK MODELS
DENSO ONLY
Effective November 1, 2019; all DENSO Cockpit Control Units, Audio and Audio w/Navigation
Multimedia Infotainment Systems will require an additional entry of the RO* character string (see
image below) from the DENSO/Denso Ten exchange unit “Packing Slip” included with the delivery
of every DENSO exchange unit shipped to the Retailer. The RO field is located between the Order
Date and Complaint on the Packing Slip.
* Please do not confuse this with the Retailer repair order number.
The RO number on the DENSO/Denso Ten Packing Slip is a required entry for the Comments
Field for a claim submission for an audio exchange. This is in addition to the existing Claim
Order/ Audio Exchange Number entry in the Misc. Detail field. BOTH entries will now be
required.
An example of the RO number on the DENSO/Denso Ten Packing Slip is show below.
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 6 of 18
VEHICLE APPLICATIONS – AUDIO/NAVIGATION
DESCRIPTION &
APPICABILITY
ILLUSTRATION
Ascent
6.5 Inch Display
Audio System
Base Level
MANUFACTURER
PART NUMBER
Harman
86201XC63A
Harman
86201XC64A
Harman
86271XC62A
Harman
86271XC63A
Base Model Vehicle
Six (6) Speakers
Ascent
8 Inch Display
Audio System
Mid Level
Premium & Limited
Model Vehicles
Six (6) Speakers
Ascent
8 Inch Display
Audio/Navigation System
High Level
Premium Model Vehicle
Six (6) Speakers
Ascent
8 Inch Display
Audio/Navigation System
High Level
Limited & Touring Model
Vehicles w/Harmon Kardon
Amplifier
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 7 of 18
DESCRIPTION &
APPICABILITY
BRZ
ILLUSTRATION
7 Inch Display
Audio/Navigation System
High Level
MANUFACTURER
PART NUMBER
Harman
86271CA690
Harman
86201FL64A
Harman
86201FL66A
Harman
86201FL67A
Limited & tS Model
Vehicles
Eight (8) Speakers
Crosstrek
6.5 Inch Display
Audio System
Mid Level
Premium Model Vehicle
Six (6) Speakers
Crosstrek
6.5 Inch Display
Audio System
Base Level
Base Model Vehicle
Four (4) Speakers
Crosstrek
8 Inch Display
Audio System
Mid Level
Limited Model Vehicle
Six (6) Speakers
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 8 of 18
DESCRIPTION &
APPICABILITY
ILLUSTRATION
MANUFACTURER
PART NUMBER
Harman
86201FL690
Harman
86271FL65A
Harman
86271FL690
Harman
86201SJ640
Crosstrek
8 Inch Display
Audio System
Mid Level
Hybrid
Model Vehicle
Six (6) Speakers
Crosstrek
8 Inch Display
Audio/Navigation System
High Level
Limited Model Vehicle
Six (6) Speakers
Crosstrek
8 Inch Display
Audio/Navigation System
High Level
Hybrid
Model Vehicle
Six (6) Speakers
Forester
6.5 Inch Display
Audio System
Mid Level
Premium & Sport Model
Vehicles
Six (6) Speakers
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 9 of 18
DESCRIPTION &
APPICABILITY
ILLUSTRATION
MANUFACTURER
PART NUMBER
Harman
86201SJ650
Harman
86201SJ660
Harman
86201SJ670
Harman
86271SJ620
Forester
6.5 Inch Display
Audio System
Base Level
Base Model Vehicle
Four (4) Speakers
Forester
8 Inch Display
Audio System
Mid Level
Sport & Limited Model
Vehicles
Six (6) Speakers
Forester
8 Inch Display
Audio System
Mid Level
Sport, Limited & Touring
Model Vehicles
w/Harman Kardon Amp.
Nine (9) Speakers
Forester
8 Inch Display
Audio/Navigation System
High Level
Premium Model Vehicle
Six (6) Speakers
Continued...
Bulletin Number: 15-249-19R; Revised: 03/19/20
Page 10 of 18
DESCRIPTION &
APPICABILITY
ILLUSTRATION
MANUFACTURER
PART NUMBER
Harman
86271SJ630
Harman
86201FL64A
Harman
86201FL66A
Harman
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-249-19R
Replacement Service Bulletin Number:
MFR Communication Date: 2020-03-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA
AutoAuth access for Chrysler
, Jeep
, Dodge
, and Fiat
(2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA
AutoAuth account is not included with the device. Users must register and pay separately through the official FCA
AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- AI-Assisted Wireless Car Diagnostic Scanner Puts $2,000 Scan Tools to Rest: Upgrade Ver. of D8BT/D7W, wireless ver. of D8S, XTOOL D8W obd2 scanner diagnostic tool targeted for professional US mechanics/workshops/family garage, with 64 GB high-end hardware, 20X faster Built-in WIFI connection, More Stable than BT, packs high-level comprehensive, easy to use AI Assistance features: Topology Mapping, ECU C0ding, PMI Function, 4K+ Active Tests, All System Diagnosis, 42+ Maintenance and more, FCA
/CAN FD/DoIP, Pre/Post Scan, Diagnostic Report V2.0, etc. offers the “dealership” diagnosis, isn’t it a Top Pick Scan Tool in this budget - Super Powerful WI-FI Communication, Extraordinary Built-in Wireless Connectivity: The WI-FI connection, the advanced version of BT, enables the D8W car scanner diagnostic tool to connect directly to vehicles more quickly, easily by simply plugging in the VCI, with the built-in Wi-Fi inside. No additional WiFi signal is required. Its Max high-speed 64 Mbps transmission speed, 33 ft-66 ft or further diagnostic distance, and stable connectivity, makes this obd 2 scanner the winner surpasses traditional BT scanners, more stable, faster, supports longer distance, convenient, and easy to plug and play
- Topology Mapping/AI-Assisted OE-Level Full Systems Diagnostics/Bi Directional Scan Tool/4000+ Active Test: D8W topology scan tool can scan, display all modules with a color topology structure, and view faults at a glance, comparable to other $1,200 to $2,000 obd scanners in the market. Its AI-powered system instantly analyzes fault codes and diagnostic reports for faster and precise repair solution. It also features full-featured bidirectional ability such as Compression Test, Mirror/Sunroof Test, and more active tests, save costs from "dearlership", covers more vehicles for Chrysler
2018+. Please check compatibility with XTOOL before purchase, AI is just for reference - Advance ECU Configuration/PMI: XTOOL D8W advanced automotive scanner diagnostic tool has the abilities for BENZ/for BMW
/for Mitsubishi
are designed to unleash the hidden function like turn off the seat belt buzzer and improve car performance. New launched PMI function provided by XTOOL D8W car code scanner for Ford
, for Lincoln
, for Mazda
supports restore full ECU operation into new modules to finish replacement. Note: Please check compatibility with VIN, and Modules - 42+ Services/Calibration/Initialization/Matching/Relearn Functions: D8W wireless bidirectional obd2 scanner performs more than 42 comprehensive service functions for 10,000+ vehicles including Oil reset, EPB, SAS, Throttle, BMS reset, ABS Bleed, injector c0ding, Fuel Trim Reset, Cylinder Power Balance, Cam Crank Sensors Relearn, VIN Writing, Fuel Injector Balance, Language Change, Auto Stop/Start Reset, A/F Reset, PMI function, etc. Note: Special Functions do NOT work on all cars
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




