NHTSA ID Number: 10172657
Manufacturer Communication Number: N192273630-01
TSB/Document Date: 2020-03-23
Summary
Emission - General Motors
has decided to conduct a voluntary emissions recall involving certain 2018-2019 model year diesel engine vehicles. The engine control module (ECM) in these vehicles may not adequately diagnose or illuminate the malfunction indicator lamp (Check Engine Light) when frequent regeneration of the diesel particulate filter (DPF) occurs. Dealers are to program the engine control module (ECM) with corrected software.
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
Release Date:
Revision Description:
Attention:
February 2020
Revision:
01
This bulletin was revised to include 2018-2019 Model Year Chevrolet Express, 2018-2019
Model Year GMC Savana and all other 2018 Model Year vehicles to the population.
Originally launched in Canada only, this bulletin revision now includes 2018-2019 Model
Year vehicles in the US, Canada and other regions. Certain 2018 Model Year Silverado
HD and Sierra HD vehicles have been moved to Emission Recall # N192273631. Please
discard all previous copies of bulletin N192273630.
(The next 2 paragraphs apply only to Canadian Vehicles.)
Vehicles involved in this recall were placed on stop delivery November 14, 2019. Once the service
procedure contained in this bulletin has been performed on the vehicle, the vehicle is released from stop
delivery and the vehicle can be delivered to the customer. (Canada Only)
All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer
traded, or used for demonstration purposes until the repair contained in this bulletin has been performed
on the vehicle. (Canada Only)
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor
vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or
noncompliance is remedied.
For K2xx trucks built in MY18, it is necessary to select sequenced ECM/TCM programming. The
TCM calibration portion will skip on these trucks, and so the labor time reflects that the ECM is
the only module being programmed.
Make
Model
Colorado
Cruze
Equinox
Express
Silverado HD
Canyon
Savana
Sierra HD
Terrain
Model Year
From
To
2018
2019
2018
2019
2018
2019
2018
2019
2018
2019
2018
2019
2018
2019
2018
2019
2018
2019
RPO
Description
Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management
system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections
and/or repairs.
Condition
Correction
General Motors has decided to conduct a voluntary emissions recall involving certain 2018-2019 model
year diesel engine vehicles. The engine control module (ECM) in these vehicles may not adequately
diagnose or illuminate the malfunction indicator lamp (Check Engine Light) when frequent regeneration
of the diesel particulate filter (DPF) occurs.
Dealers are to program the engine control module (ECM) with corrected software.
Parts
No parts are required for this repair.
Warranty Information
Labor
Operation
9104655*
9104802*
9104910
9104983
Description
Engine Control Module Reprogramming with SPS
Add: Relearn ambient air temperature sensor (LWN engine vehicles
only)
Verified Module Software or Calibration Level: Module Is
Programmed with Same Level Software or Calibration
Floor Plan Reimbursement (Canada Only)
Working Capital Assistance Program Reimbursement – USED
INVENTORY ONLY (Canada Only)
Labor
Time
0.3
0.2
Trans.
Type
Net
Item
N/A
0.2
ZFAT
N/A
**
N/A
***
* To avoid warranty transaction rejections, carefully read and follow the instructions below:
Copyright 2019 General Motors. All Rights Reserved.
Page 1 of 7
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
•
The SPS Warranty Claim Code must be accurately entered in the “SPS Warranty Claim Code” field of the
transaction.
•
When more than one Warranty Claim Code is generated for a programming event, it is required to document all
Warranty Claim Codes in the “Correction” field on the job card. Dealers must also enter one of the codes in the
“SPS Warranty Claim Code” field of the transaction, otherwise the transaction will reject. It is best practice to
enter the FINAL code provided by SPS.
Warranty Claim Code Information Retrieval
If the SPS Warranty Claim Code was not recorded on the Job Card, the code can be retrieved in the SPS system as
follows:
1.
2.
3.
4.
Open TIS on the computer used to program the vehicle.
Select and start SPS.
Select Settings.
Select the Warranty Claim Code tab.
The VIN, Warranty Claim Code and Date/Time will be listed on a roster of recent programming events. If the code is
retrievable, dealers should resubmit the transaction making sure to include the code in the SPS Warranty Claim Code
field.
Floor Plan Reimbursement – NEW CANADIAN INVENTORY ONLY
Note: To avoid having to “H” route the floor plan transaction for approval, it must be submitted prior to the repair
transaction.
**
Canada Only - Vehicles eligible for floor plan reimbursement are to submit the amount in “Net Item” and should
represent the product of the vehicle’s average daily interest rate (see table below) multiplied by the actual number of
days the vehicle was in dealer inventory and not available for sale. This reimbursement, for 2019 Colorado, Cruze,
Equinox, Silverado, Canyon, Sierra, and Terrain vehicles is limited to the number of days from the date of the stop
delivery message (November 14, 2019) to the date the repair was able to be completed and the vehicle was ready
for sale (not to exceed 35 days):
The reimbursement for 2019 Chevrolet Express and GMC Savana vehicles is limited to the number of days from the
date of the stop delivery message (November 14, 2019) to the date the repair is able to be completed and the vehicle
is ready for sale (not to exceed 95 days):
Vehicle
2019 Colorado
2019 Cruze
2019 Equinox
2019 Silverado HD
2019 Canyon
2019 Sierra HD Crew
2019 Terrain
2019 Chevrolet Express
2019 GMC Savana
Reimbursement Amount
Canada
$6.71
$4.01
$5.41
$10.67
$6.77
$11.05
$5.47
$6.26
$6.34
Maximum Days Allowed to Claim
35
35
35
35
35
35
35
95
95
Working Capital Assistance Program (WCAP) Reimbursement – USED CANADIAN INVENTORY ONLY
Note: To avoid having to “H” route the WCAP transaction for approval, it must be submitted prior to the repair transaction.
Important: The WCAP ZSET transaction labor code, 9800047, provided in the dealer message sent on January
30, 2020, must have been submitted prior to the submittal of the ZFAT transaction labor code or the claim will
reject.
*** Canada Dealers Only - For vehicles eligible under the Working Capital Assistance Program, the amount should be
submitted in Net Item/Miscellaneous. This amount has been calculated to a daily value for the days that the vehicle
was in used dealer inventory and not available for sale. This reimbursement is limited to the number of days from
the date of the stop sale/stop delivery order (November 14, 2019) to the date the inspection or repair closed the recall
bulletin. (not to exceed 95 days).
FOR 2019 MODEL YEAR (EXCLUDING 2019 SAVANA/EXPRESS): This reimbursement is limited to the number
of days from the date of the stop sale/stop delivery order (November 14, 2019) to the date the inspection or repair
closed the recall bulletin. (not to exceed 35 days).
Page 2 of 7
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
FOR 2019 MODEL YEAR SAVANA/EXPRESS AND ALL 2018 MODEL YEAR VEHICLES: This reimbursement is
limited to the number of days from the date of the stop sale/stop delivery order (November 14, 2019) to the date the
inspection or repair closed the recall bulletin. (not to exceed 95 days).
Vehicle
2019 Colorado
2019 Cruze
2019 Equinox
2019 Express
2019 Silverado
2019 Canyon
2019 Savana
2019 Sierra
2019 Terrain
2018 Colorado
2018 Cruze
2018 Equinox
2018 Express
2018 Silverado
2018 Canyon
2018 Savana
2018 Sierra
2018 Terrain
Working Capital Assistance Reimbursement Amount – Canada Only
$16.48
$7.50
$12.31
$16.77
$25.60
$16.31
$16.10
$26.27
$13.60
$15.31
$7.50
$11.08
$14.79
$23.60
$14.69
$14.40
$24.60
$12.83
Service Procedure
Caution: Before downloading the update files, be sure the computer is connected to the internet through a network cable
(hardwired). DO NOT DOWNLOAD or install the files wirelessly. If there is an interruption during programming,
programming failure or control module damage may occur.
Note: Carefully read and follow the instructions below.
•
Ensure the programming tool is equipped with the latest software and is securely connected to the data link connector.
If there is an interruption during programming, programming failure or control module damage may occur.
•
Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage or loss of voltage will
interrupt programming. Install a GM Authorized Programming Support Tool to maintain system voltage. Refer to
www.gmdesolutions.com for further information. If not available, connect a fully charged 12 V jumper or booster
pack disconnected from the AC voltage supply. DO NOT connect a battery charger.
•
Turn OFF or disable systems that may put a load on the vehicles battery such as; interior lights, exterior lights
(including daytime running lights), HVAC, radio, etc.
•
Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/Maintenance (I/M)
system status indicators to NO.
Page 3 of 7
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
5431207
Note: If the Same Calibration/Software Warning is noted on the SPS screen, select OK and follow screen instructions.
After a successful programming event, the WCC is located in the Service Programming System dialogue box of the
SPS Summary screen. No further action is required. Refer to the Warranty section of the bulletin.
1.
Reprogram the Engine Control Module. Refer to K20 Engine Control Module: Programming and Setup in SI.
•
For K2xx trucks built in MY18, it is necessary to select sequenced ECM/TCM programming. The TCM
calibration portion will skip on these trucks, and so the labor time reflects that the ECM is the only
module being programmed.
Page 4 of 7
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
5431209
Note: To avoid warranty transaction rejections, you MUST record the warranty claim code provided on the SPS
Warranty Claim Code (WCC) screen on the job card. Refer to callout 1 above for the location of the WCC on the SPS
screen.
2.
Perform the Ambient Air Temperature Calculation Reset if necessary. Refer to Ambient Air Temperature Calculation
Reset in SI.
3.
Record SPS Warranty Claim Code on job card for warranty transaction submission.
4.
CALIFORNIA VEHICLES ONLY: Complete a “Proof of Correction” certificate and provide to the vehicle owner upon
recall completion.
Dealer Responsibility
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers' possession
and subject to this recall must be held and inspected/repaired per the service procedure of this bulletin before customers
take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealer-traded,
released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System
(CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting
an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified
for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle,
or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer
information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the
required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this
bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the
customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this field action enters your vehicle inventory you must take the steps
necessary to ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering
Page 5 of 7
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
your facility for service, you are required to ensure the customer is aware of the open field action and make every
reasonable effort to implement the program correction as set forth in this bulletin prior to releasing the vehicle.
***THE FOLLOWING 2 PARAGRAPHS ARE NOT FOR CANADA OR EXPORT***
When a California emissions recall is completed by a GM dealer, the dealer must provide the vehicle owner a “Proof of
Correction Certificate” which the owner may need to present to the California Department Of Motor Vehicles (DMV) when
renewing their vehicle registration. Without this correction certificate, the owner may be unable to renew their vehicle
registration.
Additional Certificates can be obtained, at no charge, from the 1Store application in GlobalConnect. Request GM Item
Number 1825 when ordering.
Dealer Reports
For dealers with involved vehicles, a listing with involved vehicles has been prepared and will be provided to U.S. and
Canadian dealers through the GM GlobalConnect Recall Reports, or sent directly to export dealers. The listing may
contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor
vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in
several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to
complete this recall.
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for customers whose vehicles are involved in a product program and still within the
warranty coverage period. See General Motors Service Policies and Procedures Manual, Sections 1.4 and 6.1.10, for
courtesy transportation program details.
Customer Notification
USA & Canada - General Motors will notify customers of this recall on their vehicle (see copy of customer letter included
with this bulletin).
In order to ensure full protection under the emission warranty, and the right to participate in future recalls, the customer
notification letter recommends that customers have their vehicles serviced as soon as possible. It also advises that failure
to do so could legally be determined to be lack of proper maintenance. The vehicle may fail a state or local emission
inspection test if the recall work is not completed.
Export - Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor
Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
In order to ensure full protection under the emission warranty, and the right to participate in future recalls, the customer
notification letter recommends that customers have their vehicles serviced as soon as possible. It also advises that failure
to do so could legally be determined to be lack of proper maintenance. The vehicle may fail a state or local emission
inspection test if the recall work is not completed.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 6 of 7
Product Emission Recall
N192273630 Diesel Particulate Filter Regeneration Frequency
February 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
This notice is sent to inform you that General Motors is conducting a voluntary emission recall that includes your
vehicle.
Reason For This Recall: Your 2018-2019 model year Chevrolet or GMC vehicle, equipped with a diesel engine, may
be equipped with an improperly functioning on-board emission-related diagnostic system that violates California and
Federal standards and regulations. The engine control module (ECM) in these vehicles may not adequately
diagnose or illuminate the malfunction indicator lamp (Check Engine Light) when frequent regeneration of the
diesel particulate filter (DPF) occurs.
What Will Be Done: Your GM dealer will reprogram the engine control module (ECM) with corrected software. This
service will be performed for you at no charge. Eligibility for this service will not be denied solely due to your vehicle
having non-GM parts or repairs performed by outlets other than a GM franchised dealer.
How Long Will The Repair Take? Because of service scheduling requirements, it is likely that your dealer will need
your vehicle longer than the actual service correction time of approximately 35 minutes.
What You Should Do: Please contact your GM dealer as soon as possible to arrange a service date. Instructions for
making this correction have been sent to your dealer. Please ask your dealer if you wish to know how much time will be
needed to schedule, process, and repair your vehicle.
If you have any questions or need any assistance, just contact your dealer or the appropriate Customer Assistance
Center at the number listed below.
Division
Chevrolet
GMC
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-800-630-2438
1-866-996-9463
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones (TTY)
1-800-833-2438
1-800-462-8583
Emission Law Information: In order to ensure your full protection under the emission warranty made applicable to
your vehicle by state and federal law, and your right to participate in future recalls, it is recommended that you have
your vehicle serviced as soon as possible. Failure to do so could legally be determined to be lack of proper
maintenance of your vehicle. Also, your vehicle may fail a state or local emission inspection if this recall is not
accomplished.
IMPORTANT MESSAGE FOR CALIFORNIA RESIDENTS
The California Air Resources Board (CARB) requires vehicle emission recalls be completed prior to California
registration renewal. Uncorrected emission recalls will result in the inability to renew your California vehicle registration.
At the time of emission recall completion, your California dealer will issue a "Proof of Correction Certificate". Keep this
certificate and, if required, present it to the Department of Motor Vehicles when renewing your California registration as
proof of recall completion.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued
satisfaction with our products.
Maryann L. Combs
Vice President
Global Vehicle Safety
N192273630
Page 7 of 7
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5324
URGENT - DISTRIBUTE IMMEDIATELY
Date:
February 12, 2020
Subject: N192273630-01 – Product Emission Recall
Diesel Particulate Filter Regeneration Frequency
Revised Population, Floor plan, and WCAP
Models: 2018 – 2019 Chevrolet Colorado
2018 – 2019 Chevrolet Cruze
2018 – 2019 Chevrolet Equinox
2018 – 2019 Chevrolet Express
2018 – 2019 Chevrolet Silverado HD
2018 – 2019 GMC Canyon
2018 – 2019 GMC Savana
2018 – 2019 GMC Sierra HD
2018 – 2019 GMC Terrain
To:
All General Motors Dealers
This bulletin was revised to include 2018-2019 Model Year Chevrolet Express,
2018-2019 Model Year GMC Savana and all other 2018 Model Year vehicles
to the population. Originally launched in Canada only, this bulletin revision
now includes 2018-2019 Model Year vehicles in the US, Canada and other
regions. Certain 2018 Model Year Silverado HD and Sierra HD vehicles have
been moved to Emission Recall # N192273631. Please discard all previous
copies of bulletin N192273630.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
- [All-in-One OEM Reprogramming and Diagnostics] - When...
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
- [One-Click Installation, Continuous Updates] - The exclusive...
- [Works with Windows Compatibility and OEM Software...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N192273630-01
Replacement Service Bulletin Number:
MFR Communication Date: 2020-02-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: FUEL SYSTEM, DIESEL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.