NHTSA ID Number: 10172001
Manufacturer Communication Number: Circular 93D2
TSB/Document Date: 2020-03-06
Summary
It is possible that the high-voltage battery housing bonded seam was made in a non-optimal position. If this condition is present, moisture can enter the high-voltage battery
housing. The driver may be alerted to this condition by the illumination of a high-voltage system warning indicator on the instrument cluster display.
•
This test ensures the -VAS6911/3A- does
not leak.
•
Test can be done with either -VAS1397A- or
-VAS1397B-.
•
-VAS1397B- shown.
•
Using VAG1397A:
o
•
Attach connection A of
-VAS691005/1- to connection II on
turbocharger tester -VAG1397A-.
Using VAG1397B:
o
Attach connection A of
-VAS691005/1- to connection II on
turbocharger tester -VAG1397B-.
•
Connect connection C of -VAS691005/1- to
hand pump -VAG1274B-.
•
Open cut-off valves A and C on
-VAS691005/1-.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 78 of 94
•
•
Using -VAG1397A-:
o
Turn
on
turbocharger
-VAG1397A-.
o
Select setting II .
tester
Using -VAG1397B-:
o
Turn
on
turbocharger
-VAG1397B-.
tester
o
Press the menu button until the
relative pressure setting (P-rel) is
displayed .
o
Wait approximately 30 seconds for
tester to calibrate.
o
Display will then read 0.000.
CAUTION
Risk of Tool Damage!
Do not exceed 2.99 bar or irreparable damage to
the tool will occur.
•
No other tools should be attached to the
-VAS691005/1-.
•
Using hand pump -VAG1274B-, build up
pressure
until
turbocharger
tester
-VAG1397A/B- reads between 0.300 and
0.350 bar (300 - 350 mbar).
•
Close cut-off
-VAS691005/1-.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 79 of 94
Stabilize
Pressure loss
< 5 mbar = OK
•
Allow pressure to stabilize for one minute.
•
After the pressure is stable, wait 30 seconds
and check pressure drop on turbocharger
tester -VAG1397A/B-.
•
If pressure drop does not exceed 5 mbar after
30 seconds, then the -VAS6911/3A- is OK.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 80 of 94
Appendix D – High-Voltage Battery Acclimation Test
•
This test ensures the pressure inside the highvoltage battery housing has stabilized. This
will ensure an accurate reading during the
high-voltage battery pressure test.
•
Do not place any objects on the highvoltage battery.
•
Leave cut-off valve C open on -VAS691005/1when assembling the tools. Otherwise,
damage to the pressure gauge -VAS611013may occur.
•
This test must be performed under constant
temperature conditions.
•
Test block is
-VAS6911/3A- .
•
Seal pressure equalization openings on
battery housing (top section) with sealing
plugs -VAS6911/15- .
removed
from
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 81 of 94
Pressure
increase < 0.5
mbar = OK
•
Ensure cut-off valves A and C are open on
-VAS691005/1- when connecting tools.
•
Attach connection B of the -VAS691005/1- to
the -VAS6911/3A- .
•
Attach -VAS6911/3A- to the high-voltage
battery connection .
•
Close cut-off valve C on -VAS691005/1-.
•
Observe the pressure
-VAS611013- .
•
After five minutes, the pressure should not
increase by more than 0.5 mbar.
•
If pressure does increase by more than 0.5
mbar, wait another 5 minutes to allow the
pressure inside the battery housing to
acclimate.
reading
on
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 82 of 94
Appendix E – High-Voltage Battery Pressure Test
•
This test ensures the high-voltage battery
does not leak.
•
This test must be performed with pressure
gauge -VAS611013-.
•
Do not place any objects on the highvoltage battery.
•
Leave cut-off valve C open on -VAS691005/1when assembling the tools. Otherwise,
damage to the pressure gauge -VAS611013may occur.
•
This test must be performed under constant
temperature conditions.
•
Test block is
-VAS6911/3A- .
•
Ensure the pressure equalization openings on
battery housing (top section) are sealed with
sealing plugs -VAS6911/15- .
removed
from
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 83 of 94
•
Ensure cut-off valves A and C are open on
-VAS691005/1- when connecting tools.
•
Connect connection C of -VAS691005/1- to
hand pump -VAG1274B-.
•
Open cut-off valves A and C on
-VAS691005/1-.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 84 of 94
•
Connection A of -VAS691005/1- is
attached to pressure gauge -VAS611013-.
•
The -VAS6911/3A- is attached to the highvoltage battery connection .
•
Connection B of the -VAS691005/1- is
attached to the -VAS6911/3A- .
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 85 of 94
CAUTION
Risk of Tool Damage!
Do not exceed 35
the tool will occur.
Stabilize
mbar or irreparable damage to
•
Turn on pressure tester -VAS611013-.
•
Using hand pump -VAG1274B-, build up
pressure until pressure gauge -VAS611013reads 30.1 or 30.2 mbar.
•
Close cut-off
-VAS691005/1-.
•
Allow pressure to stabilize for one minute.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 86 of 94
•
After the pressure is stable, wait 10 minutes
and check pressure drop on turbocharger
tester -VAS611013-.
•
If pressure drop does not exceed 9 mbar after
10 minutes:
o
Pressure loss
< 9 mbar = OK
•
The high-voltage battery is OK.
If pressure drop exceeds 9 mbar after 10
minutes:
o
Generate pressure as outlined in this
High-voltage battery pressure test.
o
Spray battery housing seams and
other areas with soapy water to find
the leak.
o
The sealing plugs for the pressure
equalization are also locations where
leaks can potentially occur.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 87 of 94
Appendix F – Battery Housing Bolt Torque Sequence
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 88 of 94
Appendix G – A3 Battery Portal Instructions (U.S. Dealers Only)
Register New User Account
1. Navigate to the A3 Battery Recall Portal: https://a3.evbatteryreturns.com/
2. On the Sign In screen, click the New User tab.
3. Complete all required fields and click the Continue button.
4. Enter a unique password, confirm that password and click the Register User button.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 89 of 94
5. After successful registration, you will be sent an email with a link to verify your account email address. NOTE:
You will not be able to log into the portal until after your account has been verified. If you do not receive the
account verification email, be sure to whitelist our domain (evbatteryreturns.com) to prevent emails from being
sent to your spam folder.
Existing User Sign In
1. Navigate to the A3 Battery Recall Portal: https://a3.evbatteryreturns.com/
2. On the Sign In screen, ensure the Existing User tab is selected:
3. Enter the Email and Password used when registering your account and click the Sign In button.
4a. [OPTIONAL] If you cannot remember your password, click the ‘Forgot Password?’ link.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 90 of 94
4b. [OPTIONAL] Ensure your email is entered correctly and click the Reset Password button to send an email
with a link to reset your password. Once reset, you can immediately log in with your new password.
First Portal Login (i.e. Complete Dealership Setup)
1. At first login, you will be asked to finish the setup of your dealership. Click the Complete Setup button.
2. Enter your Dealer No. and Dealer Name into the dialog window. Click the Next button.
3. Enter the primary address from where batteries will be picked up. Click the Submit button.
NOTE: This will set the default pickup address, however, it can be changed at any time.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 91 of 94
Schedule Battery Return Request
1. From the Battery Returns view, click the Schedule Return button.
2. A dialog will be displayed. Confirm the Pickup Address either by selecting an existing address or entering a
new address. Click the Next button.
3. Confirm Contact Information for person responsible for managing the battery return. NOTE: Your user
information will be added by default; but fields can be updated to a more appropriate contact person if necessary.
Click the Next button.
4. Enter the VIN associated with the battery being returned and select the number of defective battery modules
identified (between 1 – 4 modules). Review the list of potential hazards related to the battery and select any that
apply. NOTE: In most cases, no hazards will be selected; however, if you are unsure about this selection you
should contact our support team at [email protected].
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 92 of 94
5. Read the notification about Department of Transportation training requirements and certify whether the
employee responsible for packaging and offering battery for shipment is approved to ship hazardous materials.
Click the Get Estimate button. NOTE: If you select “No hazmat trained employee. Use an authorized third party
instead.”, all costs related to the use of that third party (approximately $700 – $1,400) will be passed through to
your dealership.
6. Review Cost Estimate charges. Select the checkbox to signify your agreement with the payment Terms and
Conditions. Click Submit Request.
7. A table of Battery Return Requests will now be displayed. You may click on the View icon to see more details
for the request. Further, you may click the Schedule New Return button to submit an additional request.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 93 of 94
Update User Information
1. From any screen, click the User Profile option.
2. From this screen, you can update User, Dealer, or Dealer Locations information.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
93D2 Page 94 of 94
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- Fast Starting Power: This 12V 70Ah 760 CCA delivers strong...
- Made to Last: With its 120-minute Reserve Capacity supports...
- All Power, No Mess AGM Design: Sealed and spill-proof, the...
- Strength That Starts on the Inside: The rugged construction...
- Tested Tough & Certified Safe: Mighty Max batteries are...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular 93D2
Replacement Service Bulletin Number:
MFR Communication Date: 2020-02-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.