NHTSA ID Number: 10171934
Manufacturer Communication Number: 15-205-16R
TSB/Document Date: 2020-03-03
Summary
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving an F10 Navigation and Display Audio units with 7' display.
ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2016 Subaru
of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE INFORMATION BULLETIN
APPLICABILITY: 2015-2017MY Legacy and Outback
2015-2016 Impreza
2015-2017 Crosstrek
2016-2018MY Forester
2016-2018MY WRX
NUMBER: 15-205-16R
DATE: 11/21/16
REVISED: 02/27/20
SUBJECT: Reprogramming File Availability to Address
Operational Concerns with “Gen 2.0” and “Gen 2.1”
Fujitsu-TEN (F10) / Denso-TEN (D10) Navigation and
7” Display Audio Units
INTRODUCTION:
This bulletin announces new reprogramming file availability and the software installation
procedure to address additional operational concerns received from the field and listed below
involving “Gen 2” F10 Navigation and Display Audio units with 7” display. The procedure will
involve downloading the applicable software update files then loading them onto two flash drives for
audio unit installation. It is important to read through and understand this information completely
before proceeding. These latest software updates contain new logic to address the
following concerns:
•
Incomplete SXM channel list displayed
•
Thumbnail images included with phone contacts are not displayed (iPhone only)
•
Quick Message is grayed out and cannot be selected for a reply message
•
Head Unit does not respond to touch panel (soft key) commands
•
Clock display shifts by one hour when daylight saving is set to auto (applicable to 2015MY
Legacy / Outback, 2015MY Impreza / Crosstrek, 2016MY Forester and 2016MY WRX/
WRX STI models with Gen 2.0 audio units only).
In addition to updates for above conditions, each of the new files listed in the table below contain
ALL of the previous updates for conditions referenced in prior TSBs 15-182-15R, 15-183-15R and
15-198-16R which this TSB replaces. An overview of conditions addressed in the three prior TSBs
along with a Version I.D. reference table is provided in Appendix section beginning on page 19.
PRODUCTION CHANGE INFORMATION:
(See Step 1 on page 3). Compare the result to the updated table shown below. If the current version
number is PRIOR to the version number listed in the table, continue with the updating procedure.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru
Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
SUBARU
OF AMERICA, INC. IS
ISO 14001 COMPLIANT
ISO 14001 is the international
standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 1
Model
Model
Year
NAVI
/
DA
NAVI
2015
DA
Legacy
&
Outback
NAVI
2016
DA
NAVI
2017
DA
NAVI
Faceplate ID
Number
FB644US![]()
FB664US![]()
FB644UM![]()
FB664UM![]()
FB685US![]()
FB695US![]()
FB685UM![]()
FB695UM![]()
FB876US![]()
FB856US![]()
FB856UM![]()
FB876UM![]()
FM634US![]()
Update Software File Name
Update File #1 Name
Update File #2 Name
NU9021_USB_1st.exe
NU9021_USB_2nd.exe
OU9020_USB_1st.exe
OU9020_USB_2nd.exe
NU9313_USB_1st.exe
NU9313_USB_2nd.exe
OU9312_USB_1st.exe
OU9312_USB_2nd.exe
C_NU9510_USB_1st.exe
C_NU9510_USB_2nd.exe
C_OU9509_USB_1st.exe
C_OU9509_USB_2nd.exe
NU9115(US)_USB_1st.exe
NU9115(US)_USB_2nd.exe
2015
DA
Impreza
&
Crosstrek
NAVI
2016
DA
NAVI
2017
DA
NAVI
2016
DA
NAVI
Forester
2017
DA
NAVI
2018
DA
NAVI
FM664UM![]()
FM655UH![]()
FM675UH![]()
FM705UM![]()
FM685UM![]()
FM666US![]()
FM686US
FM685UM![]()
FM705UM![]()
FF667US![]()
FF687US![]()
FF667UM![]()
FF687UM![]()
FF868US![]()
FF878US![]()
FF678UM![]()
FF698UM![]()
FF629US![]()
FF639US![]()
FF689UM![]()
FF679UM![]()
FV631US![]()
OU9114(US)_USB_1st.exe
OU9114(US)_USB_2nd.exe
NU9411_USB_1st.exe
NU9411_USB_2nd.exe
OU9410_USB_1st.exe
OU9410_USB_2nd.exe
NU9510_USB_1st.exe
NU9510_USB_2nd.exe
OU9410_USB_1st.exe
OU9410_USB_2nd.exe
NU9915_USB_1st.exe
NU9915_USB_2nd.exe
OU9914_USB_1st.exe
OU9914_USB_2nd.exe
NU9411_USB_1st.exe
NU9411_USB_2nd.exe
OU9410_USB_1st.exe
OU9410_USB_2nd.exe
NU9610_USB_1st.exe
NU9610_USB_2nd.exe
OU9609_USB_1st.exe
OU9609_USB_2nd.exe
NU9212_USB_1st.exe
NU9212_USB_2nd.exe
2016
WRX &
WRX STI
DA
FV651UM
OU9211_USB_1st.exe
OU9211_USB_2nd.exe
NAVI
FV642US
NU9510_USB_1st.exe
NU9510_USB_2nd.exe
2017
DA
NAVI
2018
DA
FV662UM
FV672UM![]()
FV673US
FV843UM
FV833UM![]()
OU9509_USB_1st.exe
OU9509_USB_2nd.exe
NU9610_USB_1st.exe
NU9610_USB_2nd.exe
OU9609_USB_1st.exe
OU9609_USB_2nd.exe
Subarunet Link Title
MY15_LEG_OUT NAVI #1
MY15_LEG_OUT NAVI #2
MY15_LEG_OUT DISPLAY AUDIO #1
MY15_LEG_OUT DISPLAY AUDIO #2
MY16_LEG_OUT NAVI #1
MY16_LEG_OUT NAVI #2
MY16_LEG_OUT DISPLAY AUDIO #1
MY16_LEG_OUT DISPLAY AUDIO #2
MY17_LEG_OUT NAVI #1
MY17_LEG_OUT NAVI #2
MY17_LEG_OUT DISPLAY AUDIO #1
MY17_LEG_OUT DISPLAY AUDIO #2
MY15_IMP_CROS NAVI #1
MY15_IMP_CROS NAVI #2
MY15_IMP_CROS DISPLAY AUDIO #1
MY15_IMP_CROS DISPLAY AUDIO #2
MY16_IMP_CROS NAVI #1
MY16_IMP_CROS NAVI #2
MY16_IMP_CROS DISPLAY AUDIO #1
MY16_IMP_CROS DISPLAY AUDIO #2
MY17_IMP_CROS NAVI #1
MY17_IMP_CROS NAVI #2
MY17_IMP_CROS DISPLAY AUDIO #1
MY17_IMP_CROS DISPLAY AUDIO #2
MY16_FOR NAVI #1
MY16_FOR NAVI #2
MY16_FOR DISPLAY AUDIO #1
MY16_FOR DISPLAY AUDIO #2
FJ8_MY17_FOR NAVI #1
FJ8_MY17_FOR NAVI #2
MY17_FOR DISPLAY AUDIO #1
MY17_FOR DISPLAY AUDIO #2
MY18_FOR NAVI #1
MY18_FOR NAVI #2
MY18_FOR DISPLAY AUDIO #1
MY18_FOR DISPLAY AUDIO #2
MY16_WRX NAVI #1
MY16_WRX NAVI #2
MY16_WRX DISPLAY AUDIO #1
MY16_WRX DISPLAY AUDIO #2
MY17_WRX NAVI #1
MY17_WRX NAVI #2
MY17_WRX DISPLAY AUDIO #1
MY17_WRX DISPLAY AUDIO #2
MY18_WRX NAVI #1
MY18_WRX NAVI #2
MY18_WRX DISPLAY AUDIO #1
MY18_WRX DISPLAY AUDIO #2
NOTE: Software Version Numbers (as referenced in the Service Procedure below) are included
in the Update Software File names. Example: NU9017 and OU9106 are Version Numbers.
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 2
MATERIALS REQUIRED:
2 empty 2GB, USB 2.0 storage devices (flash drives) will be needed
to perform these updates. The drives should be dedicated to storing
and transferring these updating files only. They also need to be no
more than 4GB in size and contain a FAT32 file format before
downloading update files onto them. Do NOT use any USB
drives which contain or require the use of file management,
encryption, file backup or other software to function.
SERVICE PROCEDURE / INFORMATION:
IMPORTANT REMINDER: Read through and understand this procedure COMPLETELY before
proceeding further.
Step 1: Version Check Procedure
Before proceeding with any updates, the currently installed software version must be determined.
If the latest software version (or later) is already installed, no updates are necessary. The Version
ID numbers for this procedure are found in the Update File Applicability / Information table shown
above. If the Version ID numbers identified during the Version Check procedure are prior to (or lower
than) those shown on the table, proceed with the remainder of the software update beginning with
Step 3.
Press “AUDIO/TUNE” button 5 times
•
Switch the unit into “Diagnosis Mode” by pressing and holding the HOME button while
pressing the “AUDIO/TUNE” button 5 (five) times.
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 3
•
Press “Service Information”
•
Press “Version Information”
•
Press “Push” next to DA (or AVN for Navigation units)
•
Verify the current versions according to the Update File Applicability / Information table
shown table shown on page 7. Use the down arrow to scroll to the bottom of the list for
complete verification.
•
If the software version is current, press and HOLD the HOME button to exit the Diagnostic
Mode and complete the procedure as no updates are necessary. If no updates are necessary,
continue your diagnosis of the customer concern. If the Version ID numbers are prior to (lower
than) those shown in the table above, proceed with Step 2, preparing the USB memory (Flash
Drives) then Step 3, the software update procedure.
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 4
NOTE: If updates are necessary, the Version Check procedure will need to be performed again after
each update installation to confirm the procedure was successful.
After performing the Version Check procedure, if updates are determined to be necessary, the 2
USB flash drives will be needed to download the Update Files onto. All the F10 update files are
accessible for downloading from Subarunet under: Service Operations & Technical>>Forms /
Downloads>>Gen2/Fujitsu10/Denso10 for Audio/Navi page then clicking on the applicable
hyperlink:
Click Here to Access the Downloads for Audio/Navigation Information on Subarunet
In addition, these files have also been sent to Retailer SDS systems by Nuspire and can be found in
My Documents listed as: “F10Software Updates Gen 2.0 and 2.1Audio and Navi Head Units”.
The Subarunet page shown above will display which contains links to the update files 1 & 2 for each
model head unit. Do not download any files at this point. The file download procedures are supplied
later in this bulletin. The 2 flash drives must be formatted before the Update Files can be downloaded
onto them as outlined in Step 2 below.
Step 2: Prepare the USB Memory (flash drive)
VERY IMPORTANT: Before attempting to download any data
files, confirm the PC and flash drives you are using are not infected
with any virus. The flash drives will need to be formatted for
FAT32 following the steps below.
USB Flash Drive Formatting Procedure:
•
•
Install a flash drive into an available USB port on your PC.
Click Start (this is located in the lower left corner of the
desktop screen) then, in the Search programs and files
box, type “explorer”.
Start Button
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 5
NOTE: On SDS Notebook you may also press the My
Documents button on the GUI Home Screen.
• As you type the word “explorer”, search results will
start to appear. In the results, click on the “Windows
Explorer” option under the Programs section.
•
In the next window, choose the Computer section on the left. Locate “Removable Disk”
NOTE: Always confirm
the device you are
formatting is the USB
Flash Drive. This
drive may have various
names assigned to it
by the manufacturer of
the device and may not
reflect the drive name
given in this example.
• Right click
the picture for
“Removable Disk”
then select
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 6
“Format”.
Continued...
Bulletin Number: 15-205-16R; Revised 02/27/20
Page 7
•
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-205-16R
Replacement Service Bulletin Number:
MFR Communication Date: 2020-02-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.




