NHTSA ID Number: 10170574
Manufacturer Communication Number: B130619
TSB/Document Date: 2020-01-21
Summary
SERVICE ACTION: N54T ENGINE - INSPECT AND REPLACE INJECTOR(S). The piezo-type fuel injectors may cause a rough running at start-up or rough running while at idle.
1/3/2020
13 06 19_SERVICE ACTION: N54T ENGINE – INSPECT AND REPLACE INJECTOR(S)
SIB 13 06 19
SERVICE ACTION: N54T ENGINE – INSPECT AND REPLACE
INJECTOR(S)
2019-12-20
Please perform the procedure outlined in this Service Information on all affected vehicles before customer
delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure
the next time the vehicle is in the shop.
MODEL
E-Series
E92
E93
Model Description
335i (3 Series Coupe)
335i (3 Series Convertible)
Production Date
June 30, 2012 – October 1, 2013
June 30, 2012 – October 1, 2013
SITUATION
The piezo-type fuel injectors may cause a rough running at start-up, or rough running while at idle.
AFFECTED VEHICLES
Vehicles which require this Service Action to be completed will show it as “Open” when checked either in
AIR, the "Service Menu" of DCSnet (Dealer Communication System) or with ISPA NEXT.
PROCEDURE
Inspect all 6 injectors for a proper index number. Use a borescope or small mirror to inspect the index
numbers while the injectors are in place. Do not remove the injectors to inspect the index numbers.
Any injector that is index 10 or lower must be replaced.
Refer to Repair Instruction 13 53 310 “Removing and installing or replacing an injector” if any of the injectors
require replacement.
Do not replace any injectors that are index 11 and
higher (1).
PARTS INFORMATION
Only use and invoice the part numbers below.
Copyright ©2019 BMW
of North America, Inc.
1/3
1/3/2020
13 06 19_SERVICE ACTION: N54T ENGINE – INSPECT AND REPLACE INJECTOR(S)
Performing a part number look-up in ETK (EPC) by VIN or model in place of using/invoicing the
following part numbers may result with the wrong part numbers being invoiced and installed, this
could delay the payment of claim.
Part Number
13 53 8 648 937
13 53 8 651 060
Description
Injector
Decoupling element
Quantity
Up to 6 (as required)
Up to 6 (as required)
Additionally, other small parts that are not specified above, such as one-time use screws, nuts and seals,
which must be replaced according to the ISTA repair instructions/ETK, must be selected from the Electronic
Parts Catalogue according to the respective vehicle type and invoiced under the special defect code.
WARRANTY INFORMATION
Reimbursement for this Service Action will be via normal claim entry utilizing the following information
together with the part numbers identified above, when applicable and at the required quantity:
Defect Code:
0013130300
The vehicle is already in the workshop for another repair:
Work Pkg
Labor Operation
Description (Plus work)
Only check the injectors (No repair
necessary, the correct revision index
injectors are installed)
Labor Allowance
#1
00 68 817
00 68 818
Check the injectors and replace an
(one) injector
12 FRU (E92); 13
FRU (E93)
00 68 819
Check the injectors and replace two injectors
14 FRU (E92);
16 FRU (E93)
00 68 820
Check the injectors and replace three
injectors
17 FRU (E92);
18 FRU (E93)
00 68 821
Check the injectors and replace four injectors
19 FRU (E92);
21 FRU (E93)
00 68 822
Check the injectors and replace five injectors
22 FRU (E92);
23 FRU (E93)
00 68 823
Check the injectors and replace six (all)
injectors
24 FRU (E92);
25 FRU (E93)
00 68 824
Vehicle had the correct index revision
injectors installed through another repair* or
Technical Campaign
1 FRU
7 FRU
Or:
#2
Or
#3
Or:
#4
Or;
#5
Or:
#6
Or:
#7
Or:
#8
Or:
The vehicle arrives at your center and this Service Action shows open (No other Main work will be
performed/claimed during this workshop visit):
Work Pkg
#9
Labor Operation
00 68 233
Description (Main work)
Only check the injectors (No repair
Labor Allowance
9 FRU
Copyright ©2019 BMW
of North America, Inc.
2/3
1/3/2020
13 06 19_SERVICE ACTION: N54T ENGINE – INSPECT AND REPLACE INJECTOR(S)
necessary, the correct revision index
injectors are installed)
Or:
# 10
00 68 234
Check the injectors and replace an
(one) injector
13 FRU (E92); 15
FRU (E93)
00 68 235
Check the injectors and replace two injectors
14 FRU (E92);
16 FRU (E93)
00 68 236
Check the injectors and replace three
injectors
18 FRU (E92);
20 FRU (E93)
00 68 237
Check the injectors and replace four injectors
21 FRU (E92);
22 FRU (E93)
00 68 238
Check the injectors and replace five injectors
23 FRU (E92);
25 FRU (E93)
00 68 239
Check the injectors and replace six (all)
injectors
25 FRU (E92);
27 FRU (E93)
00 68 240
Vehicle had the correct index revision
injectors installed through another repair* or
Technical Campaign
1 FRU
Or
# 11
Or:
# 12
Or:
# 13
Or:
# 14
Or:
# 15
Or:
# 16
Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes
and in the claim comments (For example: B13 06 19 WP 1), unless otherwise required by State law.
*For possible prior fuel injector repair/claims submissions on an affected vehicle, please refer to
SI B01 15 17.
And, as applicable:
Alternative Mobility Solution (AMS) for Vehicle Owners (RO and Claim Comments Required)
This Action repair qualifies for Alternative Mobility Solution (AMS) expense reimbursement, claim this item
under the Defect Code noted above as follows:
Sublet Code 2 - Itemize the AMS sublet amount on the repair order and in the claim comment section.
Please refer to SI B01 29 16 for additional information.
Copyright ©2019 BMW
of North America, Inc.
3/3
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B130619
Replacement Service Bulletin Number:
MFR Communication Date: 2019-12-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW
, for Audi
, for GM, for Ford
and more. Note:D200 does‘t provide any OE software. - 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- Pro Features, Home Mechanic Budget: Why pay thousands for factory scan tool? The VD70S scan tool delivers advanced professional diagnostic at an affordable price, including 10x faster 33-66ft wireless scanning, 4000+ active tests, 36+ hot services, ECU coding, PMI function, and OE-level full-system scan with 8-in-one data graph. It rivals expensive shop tools - perfect for DIYer, technician and small shop. Get dealer-grade power without the cost - the VD70S obd2 scanner diagnostic tool makes pro diagnostic accessible to all. The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase
- Full Bidirectional Control for Precision Repair: VD70S obd2 scanner gives you direct vehicle module control to test components like fuel pump, injector, A/C clutch, window and more, enabling you to accurately and quickly locate faulty components. Unlike basic obd2 code reader, our advanced bidirectional control lets you actively command system - like triggering the ABS pump to confirm your fix worked. With pinpoint component testing and real-time validation, you can diagnose intermittent issues faster and prevent costly return visits. The VD70S auto diagnostic scanner transforms complex diagnostic into precise, time-saving repair - giving professional-grade accuracy at an unbeatable value
- 33-66FT Wireless Freedom - Faster & More Stable: Say goodbye to 2M cable limits. Easily Perform bi-directional tests like folding mirror, activating light or fuel pump while walking freely around your vehicle - no more cable dragging or repositioning your tool. Unlike other 33ft BT obd2 scanner that still need a cable to handle DOIP vehicle diagnostics, the VD70S bidirectional scan tool delivers a truly cable-free experience - with up to 66ft stable transmission range and faster, more reliable data transfer. With VD70S scanner, you get pro-level flexibility, faster workflow and stable diagnostics without cable clutter or wireless dropouts
- Powerful & Affordable Auto Scanner with 36+ Special Functions: Take control of your vehicle maintenance and save hundreds in shop fees with the VD70S car diagnostic tool. This car tool performs 36+ hot services including ✔Crank Sensor Relearn, Oil Reset, EPB, TPMS Reset, Throttle Adaptation, Injector Coding, ABS Bleed and more. ✔Besides, the VD70S bidirectional obd2 scanner unlocks 100+ advanced vehicle-specific functions under specific system menu, including Idle Relearn, VIN Write, Crankshaft Sensor Relearn, Fuel Trim Reset, ABS Initialization and more. These features help you solve complex system error and restore optimal vehicle performance. Text us your VIN we’ll check the compatibility
- OE-Level Full System Diagnostic, Simplified Workflow: The VD70S car diagnostic scanner delivers OE-level full system scanning (ABS/ECM/BCM/SRS/TCM and more) without the dealership cost. ✔Easily view 8 live data streams, retrieve freeze frame and run active test to quickly identify problem. ✔With advanced bidirectional control, test components like fuel injector and sensor directly to verify repair with certainty. ✔The 8-in-one graphing tracks performance trend to catch intermittent issue like a pro. Whether you're a technician or car owner, the diagnostic scanner provides shop-quality diagnostic to optimize performance and prevent costly repair - all in one affordable tool
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




